[PATCH v2 2/6] dt-bindings: display: st7789v: bound the number of Rx data lines

[Miquel Raynal]

Hello Maxime,

maxime at cerno.tech wrote on Sun, 18 Jun 2023 16:37:58 +0200:

> Hi,
> 
> On Fri, Jun 16, 2023 at 06:32:51PM +0200, Miquel Raynal wrote:
> > The ST7789V LCD controller supports regular SPI wiring, as well as no Rx
> > data line at all. The operating system needs to know whether it can read
> > registers from the device or not. Let's detail this specific design
> > possibility by bounding the spi-rx-bus-width property.
> > 
> > Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
> > ---
> >  .../devicetree/bindings/display/panel/sitronix,st7789v.yaml   | 4 ++++
> >  1 file changed, 4 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml b/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml
> > index 0ccf0487fd8e..a25df7e1df88 100644
> > --- a/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml
> > +++ b/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml
> > @@ -29,6 +29,10 @@ properties:
> >    spi-cpha: true
> >    spi-cpol: true
> >  
> > +  spi-rx-bus-width:
> > +    minimum: 0
> > +    maximum: 1
> > +  
> 
> It's not clear to me what the default would be?

This binding references spi-peripheral-props.yaml which sets the
default to 1, I believe it is sane to keep it that way?

Thanks,
Miquèl