[08/14] drm/ast: Set up release action right after enabling MMIO
Sui Jingfeng
suijingfeng at loongson.cn
Mon Jun 19 01:57:33 UTC 2023
Hi,
Tested with ast2400
On 2023/6/16 21:52, Thomas Zimmermann wrote:
> Ast sets up a managed release of the MMIO access flags. Move this
> code next to the MMIO access code, so that it runs if other errors
> occur during the device initialization.
>
> Signed-off-by: Thomas Zimmermann <tzimmermann at suse.de>
Tested-by: Sui Jingfeng <suijingfeng at loongson.cn>
Reviewed-by: Sui Jingfeng <suijingfeng at loongson.cn>
> ---
> drivers/gpu/drm/ast/ast_main.c | 38 +++++++++++++++++-----------------
> 1 file changed, 19 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/gpu/drm/ast/ast_main.c b/drivers/gpu/drm/ast/ast_main.c
> index 3295876c09b35..6ff4b837e64d7 100644
> --- a/drivers/gpu/drm/ast/ast_main.c
> +++ b/drivers/gpu/drm/ast/ast_main.c
> @@ -71,11 +71,25 @@ static void ast_enable_vga(struct drm_device *dev)
> ast_io_write8(ast, AST_IO_MISC_PORT_WRITE, 0x01);
> }
>
> -static void ast_enable_mmio(struct drm_device *dev)
> +/*
> + * Run this function as part of the HW device cleanup; not
> + * when the DRM device gets released.
> + */
> +static void ast_enable_mmio_release(void *data)
> {
> - struct ast_device *ast = to_ast_device(dev);
> + struct ast_device *ast = data;
> +
> + /* enable standard VGA decode */
> + ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xa1, 0x04);
> +}
> +
> +static int ast_enable_mmio(struct ast_device *ast)
> +{
> + struct drm_device *dev = &ast->base;
>
> ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xa1, 0x06);
> +
> + return devm_add_action_or_reset(dev->dev, ast_enable_mmio_release, ast);
> }
>
> static void ast_open_key(struct ast_device *ast)
> @@ -392,18 +406,6 @@ static int ast_get_dram_info(struct drm_device *dev)
> return 0;
> }
>
> -/*
> - * Run this function as part of the HW device cleanup; not
> - * when the DRM device gets released.
> - */
> -static void ast_device_release(void *data)
> -{
> - struct ast_device *ast = data;
> -
> - /* enable standard VGA decode */
> - ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xa1, 0x04);
> -}
> -
> struct ast_device *ast_device_create(const struct drm_driver *drv,
> struct pci_dev *pdev,
> unsigned long flags)
> @@ -465,7 +467,9 @@ struct ast_device *ast_device_create(const struct drm_driver *drv,
>
> /* Enable extended register access */
> ast_open_key(ast);
> - ast_enable_mmio(dev);
> + ret = ast_enable_mmio(ast);
> + if (ret)
> + return ERR_PTR(ret);
>
> /* Find out whether P2A works or whether to use device-tree */
> ast_detect_config_mode(dev, &scu_rev);
> @@ -498,9 +502,5 @@ struct ast_device *ast_device_create(const struct drm_driver *drv,
> if (ret)
> return ERR_PTR(ret);
>
> - ret = devm_add_action_or_reset(dev->dev, ast_device_release, ast);
> - if (ret)
> - return ERR_PTR(ret);
> -
> return ast;
> }
--
Jingfeng
More information about the dri-devel
mailing list