[PATCH] drm/bridge: dw-hdmi: use curr_conn instead of connector

[Neil Armstrong]

The struct dw_hdmi connector is only valid when not using the
DRM_BRIDGE_ATTACH_NO_CONNECTOR, thus this leads to kernel crash
on Amlogic platforms when connected to HDMI2 capable displays.

Use hdmi->curr_conn instead which holds the current connector
the current bridge chain is connected to.

Reported-by: Lukas F. Hartmann <lukas at mntre.com>
Fixes: 5d844091f237 ("drm/scdc-helper: Pimp SCDC debugs")
Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
---
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index 9d6dcaf317a1..7262238cb014 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -1426,9 +1426,9 @@ void dw_hdmi_set_high_tmds_clock_ratio(struct dw_hdmi *hdmi,
 	/* Control for TMDS Bit Period/TMDS Clock-Period Ratio */
 	if (dw_hdmi_support_scdc(hdmi, display)) {
 		if (mtmdsclock > HDMI14_MAX_TMDSCLK)
-			drm_scdc_set_high_tmds_clock_ratio(&hdmi->connector, 1);
+			drm_scdc_set_high_tmds_clock_ratio(hdmi->curr_conn, 1);
 		else
-			drm_scdc_set_high_tmds_clock_ratio(&hdmi->connector, 0);
+			drm_scdc_set_high_tmds_clock_ratio(hdmi->curr_conn, 0);
 	}
 }
 EXPORT_SYMBOL_GPL(dw_hdmi_set_high_tmds_clock_ratio);
@@ -2116,7 +2116,7 @@ static void hdmi_av_composer(struct dw_hdmi *hdmi,
 				min_t(u8, bytes, SCDC_MIN_SOURCE_VERSION));
 
 			/* Enabled Scrambling in the Sink */
-			drm_scdc_set_scrambling(&hdmi->connector, 1);
+			drm_scdc_set_scrambling(hdmi->curr_conn, 1);
 
 			/*
 			 * To activate the scrambler feature, you must ensure
@@ -2132,7 +2132,7 @@ static void hdmi_av_composer(struct dw_hdmi *hdmi,
 			hdmi_writeb(hdmi, 0, HDMI_FC_SCRAMBLER_CTRL);
 			hdmi_writeb(hdmi, (u8)~HDMI_MC_SWRSTZ_TMDSSWRST_REQ,
 				    HDMI_MC_SWRSTZ);
-			drm_scdc_set_scrambling(&hdmi->connector, 0);
+			drm_scdc_set_scrambling(hdmi->curr_conn, 0);
 		}
 	}
 

---
base-commit: 47045630bc409ce6606d97b790895210dd1d517d
change-id: 20230619-topic-amlogic-upstream-fix-hdmi2-c9b65818477e

Best regards,
-- 
Neil Armstrong <neil.armstrong at linaro.org>