[PATCH v6 4/8] phy: Add HDMI configuration options
Vinod Koul
vkoul at kernel.org
Wed Jun 21 11:22:10 UTC 2023
On 15-06-23, 09:38, Sandor Yu wrote:
> Allow HDMI PHYs to be configured through the generic
> functions through a custom structure added to the generic union.
>
> The parameters added here are based on HDMI PHY
> implementation practices. The current set of parameters
> should cover the potential users.
>
> Signed-off-by: Sandor Yu <Sandor.yu at nxp.com>
> ---
> include/linux/phy/phy-hdmi.h | 38 ++++++++++++++++++++++++++++++++++++
> include/linux/phy/phy.h | 7 ++++++-
> 2 files changed, 44 insertions(+), 1 deletion(-)
> create mode 100644 include/linux/phy/phy-hdmi.h
>
> diff --git a/include/linux/phy/phy-hdmi.h b/include/linux/phy/phy-hdmi.h
> new file mode 100644
> index 000000000000..5765aa5bc175
> --- /dev/null
> +++ b/include/linux/phy/phy-hdmi.h
> @@ -0,0 +1,38 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright 2022 NXP
> + */
> +
> +#ifndef __PHY_HDMI_H_
> +#define __PHY_HDMI_H_
> +
> +/**
> + * Pixel Encoding as HDMI Specification
> + * RGB, YUV422, YUV444:HDMI Specification 1.4a Section 6.5
> + * YUV420: HDMI Specification 2.a Section 7.1
> + */
> +enum hdmi_phy_colorspace {
> + HDMI_PHY_COLORSPACE_RGB, /* RGB 4:4:4 */
> + HDMI_PHY_COLORSPACE_YUV422, /* YCbCr 4:2:2 */
> + HDMI_PHY_COLORSPACE_YUV444, /* YCbCr 4:4:4 */
> + HDMI_PHY_COLORSPACE_YUV420, /* YCbCr 4:2:0 */
Better add this comments and above one as expected by kernel-doc for
enum..
> + HDMI_PHY_COLORSPACE_RESERVED4,
> + HDMI_PHY_COLORSPACE_RESERVED5,
> + HDMI_PHY_COLORSPACE_RESERVED6,
> +};
> +
> +/**
> + * struct phy_configure_opts_hdmi - HDMI configuration set
> + * @pixel_clk_rate: Pixel clock of video modes in KHz.
> + * @bpc: Maximum bits per color channel.
> + * @color_space: Colorspace in enum hdmi_phy_colorspace.
> + *
> + * This structure is used to represent the configuration state of a HDMI phy.
> + */
> +struct phy_configure_opts_hdmi {
> + unsigned int pixel_clk_rate;
> + unsigned int bpc;
> + enum hdmi_phy_colorspace color_space;
> +};
> +
> +#endif /* __PHY_HDMI_H_ */
> diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
> index 3a570bc59fc7..93d77d45b1d4 100644
> --- a/include/linux/phy/phy.h
> +++ b/include/linux/phy/phy.h
> @@ -17,6 +17,7 @@
> #include <linux/regulator/consumer.h>
>
> #include <linux/phy/phy-dp.h>
> +#include <linux/phy/phy-hdmi.h>
> #include <linux/phy/phy-lvds.h>
> #include <linux/phy/phy-mipi-dphy.h>
>
> @@ -42,7 +43,8 @@ enum phy_mode {
> PHY_MODE_MIPI_DPHY,
> PHY_MODE_SATA,
> PHY_MODE_LVDS,
> - PHY_MODE_DP
> + PHY_MODE_DP,
> + PHY_MODE_HDMI,
> };
>
> enum phy_media {
> @@ -60,11 +62,14 @@ enum phy_media {
> * the DisplayPort protocol.
> * @lvds: Configuration set applicable for phys supporting
> * the LVDS phy mode.
> + * @hdmi: Configuration set applicable for phys supporting
> + * the HDMI phy mode.
> */
> union phy_configure_opts {
> struct phy_configure_opts_mipi_dphy mipi_dphy;
> struct phy_configure_opts_dp dp;
> struct phy_configure_opts_lvds lvds;
> + struct phy_configure_opts_hdmi hdmi;
> };
>
> /**
> --
> 2.34.1
--
~Vinod
More information about the dri-devel
mailing list