[PATCH 5/7] phy: qcom: qmp-combo: drop similar functions

[Dmitry Baryshkov]

The functions qmp_v5_configure_dp_phy() and qmp_v6_configure_dp_phy()
are now copies of qmp_v4_configure_dp_phy(). Drop them and use the v4
function in all the cases.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 123 +---------------------
 1 file changed, 2 insertions(+), 121 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index d034b4f45bd3..80a5bebf86a2 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -1433,10 +1433,7 @@ static void qmp_v4_configure_dp_tx(struct qmp_combo *qmp);
 static int qmp_v4_configure_dp_phy(struct qmp_combo *qmp);
 static int qmp_v4_calibrate_dp_phy(struct qmp_combo *qmp);
 
-static int qmp_v5_configure_dp_phy(struct qmp_combo *qmp);
-
 static void qmp_v6_dp_aux_init(struct qmp_combo *qmp);
-static int qmp_v6_configure_dp_phy(struct qmp_combo *qmp);
 
 static inline void qphy_setbits(void __iomem *base, u32 offset, u32 val)
 {
@@ -1686,7 +1683,7 @@ static const struct qmp_phy_cfg sc8280xp_usb43dpphy_cfg = {
 
 	.dp_aux_init		= qmp_v4_dp_aux_init,
 	.configure_dp_tx	= qmp_v4_configure_dp_tx,
-	.configure_dp_phy	= qmp_v5_configure_dp_phy,
+	.configure_dp_phy	= qmp_v4_configure_dp_phy,
 	.calibrate_dp_phy	= qmp_v4_calibrate_dp_phy,
 
 	.clk_list		= qmp_v4_phy_clk_l,
@@ -1875,7 +1872,7 @@ static const struct qmp_phy_cfg sm8550_usb3dpphy_cfg = {
 
 	.dp_aux_init		= qmp_v6_dp_aux_init,
 	.configure_dp_tx	= qmp_v4_configure_dp_tx,
-	.configure_dp_phy	= qmp_v6_configure_dp_phy,
+	.configure_dp_phy	= qmp_v4_configure_dp_phy,
 	.calibrate_dp_phy	= qmp_v4_calibrate_dp_phy,
 
 	.regs			= qmp_v6_usb3phy_regs_layout,
@@ -2386,122 +2383,6 @@ static int qmp_v4_configure_dp_phy(struct qmp_combo *qmp)
 	return 0;
 }
 
-static int qmp_v5_configure_dp_phy(struct qmp_combo *qmp)
-{
-	const struct qmp_phy_cfg *cfg = qmp->cfg;
-	bool reverse = (qmp->orientation == TYPEC_ORIENTATION_REVERSE);
-	const struct phy_configure_opts_dp *dp_opts = &qmp->dp_opts;
-	u32 bias0_en, drvr0_en, bias1_en, drvr1_en;
-	u32 status;
-	int ret;
-
-	ret = qmp_v456_configure_dp_phy(qmp);
-	if (ret < 0)
-		return ret;
-
-	if (dp_opts->lanes == 1) {
-		bias0_en = reverse ? 0x3e : 0x15;
-		drvr0_en = reverse ? 0x13 : 0x10;
-		bias1_en = reverse ? 0x15 : 0x3e;
-		drvr1_en = reverse ? 0x10 : 0x13;
-	} else if (dp_opts->lanes == 2) {
-		bias0_en = reverse ? 0x3f : 0x15;
-		drvr0_en = 0x10;
-		bias1_en = reverse ? 0x15 : 0x3f;
-		drvr1_en = 0x10;
-	} else {
-		bias0_en = 0x3f;
-		bias1_en = 0x3f;
-		drvr0_en = 0x10;
-		drvr1_en = 0x10;
-	}
-
-	writel(drvr0_en, qmp->dp_tx + cfg->regs[QPHY_TX_HIGHZ_DRVR_EN]);
-	writel(bias0_en, qmp->dp_tx + cfg->regs[QPHY_TX_TRANSCEIVER_BIAS_EN]);
-	writel(drvr1_en, qmp->dp_tx2 + cfg->regs[QPHY_TX_HIGHZ_DRVR_EN]);
-	writel(bias1_en, qmp->dp_tx2 + cfg->regs[QPHY_TX_TRANSCEIVER_BIAS_EN]);
-
-	writel(0x18, qmp->dp_dp_phy + QSERDES_DP_PHY_CFG);
-	udelay(2000);
-	writel(0x19, qmp->dp_dp_phy + QSERDES_DP_PHY_CFG);
-
-	if (readl_poll_timeout(qmp->dp_dp_phy + cfg->regs[QPHY_DP_PHY_STATUS],
-			status,
-			((status & BIT(1)) > 0),
-			500,
-			10000))
-		return -ETIMEDOUT;
-
-	writel(0x0a, qmp->dp_tx + cfg->regs[QPHY_TX_TX_POL_INV]);
-	writel(0x0a, qmp->dp_tx2 + cfg->regs[QPHY_TX_TX_POL_INV]);
-
-	writel(0x27, qmp->dp_tx + cfg->regs[QPHY_TX_TX_DRV_LVL]);
-	writel(0x27, qmp->dp_tx2 + cfg->regs[QPHY_TX_TX_DRV_LVL]);
-
-	writel(0x20, qmp->dp_tx + cfg->regs[QPHY_TX_TX_EMP_POST1_LVL]);
-	writel(0x20, qmp->dp_tx2 + cfg->regs[QPHY_TX_TX_EMP_POST1_LVL]);
-
-	return 0;
-}
-
-static int qmp_v6_configure_dp_phy(struct qmp_combo *qmp)
-{
-	const struct qmp_phy_cfg *cfg = qmp->cfg;
-	bool reverse = (qmp->orientation == TYPEC_ORIENTATION_REVERSE);
-	const struct phy_configure_opts_dp *dp_opts = &qmp->dp_opts;
-	u32 bias0_en, drvr0_en, bias1_en, drvr1_en;
-	u32 status;
-	int ret;
-
-	ret = qmp_v456_configure_dp_phy(qmp);
-	if (ret < 0)
-		return ret;
-
-	if (dp_opts->lanes == 1) {
-		bias0_en = reverse ? 0x3e : 0x15;
-		drvr0_en = reverse ? 0x13 : 0x10;
-		bias1_en = reverse ? 0x15 : 0x3e;
-		drvr1_en = reverse ? 0x10 : 0x13;
-	} else if (dp_opts->lanes == 2) {
-		bias0_en = reverse ? 0x3f : 0x15;
-		drvr0_en = 0x10;
-		bias1_en = reverse ? 0x15 : 0x3f;
-		drvr1_en = 0x10;
-	} else {
-		bias0_en = 0x3f;
-		bias1_en = 0x3f;
-		drvr0_en = 0x10;
-		drvr1_en = 0x10;
-	}
-
-	writel(drvr0_en, qmp->dp_tx + cfg->regs[QPHY_TX_HIGHZ_DRVR_EN]);
-	writel(bias0_en, qmp->dp_tx + cfg->regs[QPHY_TX_TRANSCEIVER_BIAS_EN]);
-	writel(drvr1_en, qmp->dp_tx2 + cfg->regs[QPHY_TX_HIGHZ_DRVR_EN]);
-	writel(bias1_en, qmp->dp_tx2 + cfg->regs[QPHY_TX_TRANSCEIVER_BIAS_EN]);
-
-	writel(0x18, qmp->dp_dp_phy + QSERDES_DP_PHY_CFG);
-	udelay(2000);
-	writel(0x19, qmp->dp_dp_phy + QSERDES_DP_PHY_CFG);
-
-	if (readl_poll_timeout(qmp->dp_dp_phy + cfg->regs[QPHY_DP_PHY_STATUS],
-			       status,
-			       ((status & BIT(1)) > 0),
-			       500,
-			       10000))
-		return -ETIMEDOUT;
-
-	writel(0x0a, qmp->dp_tx + cfg->regs[QPHY_TX_TX_POL_INV]);
-	writel(0x0a, qmp->dp_tx2 + cfg->regs[QPHY_TX_TX_POL_INV]);
-
-	writel(0x27, qmp->dp_tx + cfg->regs[QPHY_TX_TX_DRV_LVL]);
-	writel(0x27, qmp->dp_tx2 + cfg->regs[QPHY_TX_TX_DRV_LVL]);
-
-	writel(0x20, qmp->dp_tx + cfg->regs[QPHY_TX_TX_EMP_POST1_LVL]);
-	writel(0x20, qmp->dp_tx2 + cfg->regs[QPHY_TX_TX_EMP_POST1_LVL]);
-
-	return 0;
-}
-
 /*
  * We need to calibrate the aux setting here as many times
  * as the caller tries
-- 
2.39.2