[PATCH 01/15] arm64: dts: qcom: sm6125: Sort spmi_bus node numerically by reg

[Konrad Dybcio]

On 24.06.2023 02:40, Marijn Suijten wrote:
> This node has always resided in the wrong spot, making it somewhat
> harder to contribute new node entries while maintaining proper sorting
> around it.  Move the node up to sit after hsusb_phy1 where it maintains
> proper numerial
numerical

sorting on the (first of its many) reg address property.
> 
> Fixes: cff4bbaf2a2d ("arm64: dts: qcom: Add support for SM6125")
> Signed-off-by: Marijn Suijten <marijn.suijten at somainline.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio at linaro.org>

Konrad
>  arch/arm64/boot/dts/qcom/sm6125.dtsi | 38 ++++++++++++++++++------------------
>  1 file changed, 19 insertions(+), 19 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
> index a596baa6ce3e..722dde560bec 100644
> --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
> @@ -679,6 +679,24 @@ hsusb_phy1: phy at 1613000 {
>  			status = "disabled";
>  		};
>  
> +		spmi_bus: spmi at 1c40000 {
> +			compatible = "qcom,spmi-pmic-arb";
> +			reg = <0x01c40000 0x1100>,
> +			      <0x01e00000 0x2000000>,
> +			      <0x03e00000 0x100000>,
> +			      <0x03f00000 0xa0000>,
> +			      <0x01c0a000 0x26000>;
> +			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
> +			interrupt-names = "periph_irq";
> +			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
> +			qcom,ee = <0>;
> +			qcom,channel = <0>;
> +			#address-cells = <2>;
> +			#size-cells = <0>;
> +			interrupt-controller;
> +			#interrupt-cells = <4>;
> +		};
> +
>  		rpm_msg_ram: sram at 45f0000 {
>  			compatible = "qcom,rpm-msg-ram";
>  			reg = <0x045f0000 0x7000>;
> @@ -1184,27 +1202,9 @@ sram at 4690000 {
>  			reg = <0x04690000 0x10000>;
>  		};
>  
> -		spmi_bus: spmi at 1c40000 {
> -			compatible = "qcom,spmi-pmic-arb";
> -			reg = <0x01c40000 0x1100>,
> -			      <0x01e00000 0x2000000>,
> -			      <0x03e00000 0x100000>,
> -			      <0x03f00000 0xa0000>,
> -			      <0x01c0a000 0x26000>;
> -			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
> -			interrupt-names = "periph_irq";
> -			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
> -			qcom,ee = <0>;
> -			qcom,channel = <0>;
> -			#address-cells = <2>;
> -			#size-cells = <0>;
> -			interrupt-controller;
> -			#interrupt-cells = <4>;
> -		};
> -
>  		apps_smmu: iommu at c600000 {
>  			compatible = "qcom,sm6125-smmu-500", "qcom,smmu-500", "arm,mmu-500";
> -			reg = <0xc600000 0x80000>;
> +			reg = <0x0c600000 0x80000>;
>  			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
>  				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
>  				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
>