[PATCH 2/4] regulator: Introduce Qualcomm REFGEN regulator driver
Konrad Dybcio
konrad.dybcio at linaro.org
Wed Jun 28 16:29:46 UTC 2023
Modern Qualcomm SoCs have a REFGEN (reference voltage generator)
regulator, providing reference voltage to on-chip IP, like PHYs.
Add a driver to support toggling that regulator.
This driver is based on the driver available in the downstream msm-5.4
kernel. It's been cleaned up and partly remade to match upstream
standards.
Signed-off-by: Konrad Dybcio <konrad.dybcio at linaro.org>
---
drivers/regulator/Kconfig | 10 ++
drivers/regulator/Makefile | 1 +
drivers/regulator/qcom-refgen-regulator.c | 187 ++++++++++++++++++++++++++++++
3 files changed, 198 insertions(+)
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 2c2405024ace..ea5549d62825 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -978,6 +978,16 @@ config REGULATOR_PWM
This driver supports PWM controlled voltage regulators. PWM
duty cycle can increase or decrease the voltage.
+config REGULATOR_QCOM_REFGEN
+ tristate "Qualcomm REFGEN regulator driver"
+ depends on REGMAP
+ help
+ This driver supports the MMIO-mapped reference voltage regulator,
+ used internally by some PHYs on many Qualcomm SoCs.
+
+ Say M here if you want to include support for this regulator as
+ a module. The module will be named "qcom-refgen-regulator".
+
config REGULATOR_QCOM_RPM
tristate "Qualcomm RPM regulator driver"
depends on MFD_QCOM_RPM
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index ebfa75379c20..a044ad20e202 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -107,6 +107,7 @@ obj-$(CONFIG_REGULATOR_MT6380) += mt6380-regulator.o
obj-$(CONFIG_REGULATOR_MT6397) += mt6397-regulator.o
obj-$(CONFIG_REGULATOR_MTK_DVFSRC) += mtk-dvfsrc-regulator.o
obj-$(CONFIG_REGULATOR_QCOM_LABIBB) += qcom-labibb-regulator.o
+obj-$(CONFIG_REGULATOR_QCOM_REFGEN) += qcom-refgen-regulator.o
obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o
obj-$(CONFIG_REGULATOR_QCOM_RPMH) += qcom-rpmh-regulator.o
obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o
diff --git a/drivers/regulator/qcom-refgen-regulator.c b/drivers/regulator/qcom-refgen-regulator.c
new file mode 100644
index 000000000000..854ab91f649c
--- /dev/null
+++ b/drivers/regulator/qcom-refgen-regulator.c
@@ -0,0 +1,187 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2017, 2019-2020, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+
+#define REFGEN_REG_BIAS_EN 0x08
+#define REFGEN_BIAS_EN_MASK GENMASK(2, 0)
+ #define REFGEN_BIAS_EN_ENABLE 0x7
+ #define REFGEN_BIAS_EN_DISABLE 0x6
+
+#define REFGEN_REG_BG_CTRL 0x14
+#define REFGEN_BG_CTRL_MASK GENMASK(2, 1)
+ #define REFGEN_BG_CTRL_ENABLE 0x6
+ #define REFGEN_BG_CTRL_DISABLE 0x4
+
+#define REFGEN_REG_PWRDWN_CTRL5 0x80
+#define REFGEN_PWRDWN_CTRL5_MASK BIT(0)
+ #define REFGEN_PWRDWN_CTRL5_ENABLE 0x1
+ #define REFGEN_PWRDWN_CTRL5_DISABLE 0x0
+
+struct qcom_refgen {
+ struct regulator_desc rdesc;
+ struct regulator_dev *rdev;
+ void __iomem *base;
+};
+
+static int qcom_sdm845_refgen_enable(struct regulator_dev *rdev)
+{
+ struct qcom_refgen *vreg = rdev_get_drvdata(rdev);
+
+ regmap_update_bits(vreg->base, REFGEN_REG_BG_CTRL,
+ REFGEN_BG_CTRL_MASK, REFGEN_BG_CTRL_ENABLE);
+ regmap_write(vreg->base, REFGEN_REG_BIAS_EN, REFGEN_BIAS_EN_ENABLE);
+
+ return 0;
+}
+
+static int qcom_sdm845_refgen_disable(struct regulator_dev *rdev)
+{
+ struct qcom_refgen *vreg = rdev_get_drvdata(rdev);
+
+ regmap_write(vreg->base, REFGEN_REG_BIAS_EN, REFGEN_BIAS_EN_DISABLE);
+ regmap_update_bits(vreg->base, REFGEN_REG_BG_CTRL,
+ REFGEN_BG_CTRL_MASK, REFGEN_BG_CTRL_DISABLE);
+
+ return 0;
+}
+
+static int qcom_sdm845_refgen_is_enabled(struct regulator_dev *rdev)
+{
+ struct qcom_refgen *vreg = rdev_get_drvdata(rdev);
+ u32 val;
+
+ regmap_read(vreg->base, REFGEN_REG_BG_CTRL, &val);
+ if (FIELD_GET(REFGEN_BG_CTRL_MASK, val) != REFGEN_BG_CTRL_ENABLE)
+ return 0;
+
+ regmap_read(vreg->base, REFGEN_REG_BIAS_EN, &val);
+ if (FIELD_GET(REFGEN_BIAS_EN_MASK, val) != REFGEN_BIAS_EN_ENABLE)
+ return 0;
+
+ return 1;
+}
+
+static const struct regulator_ops sdm845_refgen_ops = {
+ .enable = qcom_sdm845_refgen_enable,
+ .disable = qcom_sdm845_refgen_disable,
+ .is_enabled = qcom_sdm845_refgen_is_enabled,
+};
+
+static int qcom_sm8250_refgen_enable(struct regulator_dev *rdev)
+{
+ struct qcom_refgen *vreg = rdev_get_drvdata(rdev);
+
+ regmap_update_bits(vreg->base, REFGEN_REG_PWRDWN_CTRL5,
+ REFGEN_PWRDWN_CTRL5_MASK, REFGEN_PWRDWN_CTRL5_ENABLE);
+
+ return 0;
+}
+
+static int qcom_sm8250_refgen_disable(struct regulator_dev *rdev)
+{
+ struct qcom_refgen *vreg = rdev_get_drvdata(rdev);
+
+ regmap_update_bits(vreg->base, REFGEN_REG_PWRDWN_CTRL5,
+ REFGEN_PWRDWN_CTRL5_MASK, REFGEN_PWRDWN_CTRL5_DISABLE);
+
+ return 0;
+}
+
+static int qcom_sm8250_refgen_is_enabled(struct regulator_dev *rdev)
+{
+ struct qcom_refgen *vreg = rdev_get_drvdata(rdev);
+ u32 val;
+
+ regmap_read(vreg->base, REFGEN_REG_PWRDWN_CTRL5, &val);
+
+ return FIELD_GET(REFGEN_PWRDWN_CTRL5_MASK, val) == REFGEN_PWRDWN_CTRL5_ENABLE;
+}
+
+static const struct regulator_ops sm8250_refgen_ops = {
+ .enable = qcom_sm8250_refgen_enable,
+ .disable = qcom_sm8250_refgen_disable,
+ .is_enabled = qcom_sm8250_refgen_is_enabled,
+};
+
+static const struct regmap_config qcom_refgen_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .fast_io = true,
+};
+
+static int qcom_refgen_probe(struct platform_device *pdev)
+{
+ struct regulator_init_data *init_data;
+ struct regulator_config config = {};
+ struct device *dev = &pdev->dev;
+ struct regulator_desc *rdesc;
+ struct qcom_refgen *vreg;
+ void __iomem *base;
+
+ vreg = devm_kzalloc(dev, sizeof(*vreg), GFP_KERNEL);
+ if (!vreg)
+ return -ENOMEM;
+
+ vreg->rdesc.ops = of_device_get_match_data(dev);
+ if (!vreg->rdesc.ops)
+ return -ENODATA;
+
+ base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ vreg->base = devm_regmap_init_mmio(dev, base, &qcom_refgen_regmap_config);
+ if (IS_ERR(vreg->base))
+ return PTR_ERR(vreg->base);
+
+ init_data = of_get_regulator_init_data(dev, dev->of_node, &vreg->rdesc);
+ if (!init_data)
+ return -ENOMEM;
+
+ rdesc = &vreg->rdesc;
+
+ rdesc->name = "refgen";
+ rdesc->owner = THIS_MODULE;
+ rdesc->type = REGULATOR_VOLTAGE;
+ rdesc->enable_time = 5; /* us */
+
+ config.dev = dev;
+ config.init_data = init_data;
+ config.driver_data = vreg;
+ config.of_node = dev->of_node;
+
+ vreg->rdev = devm_regulator_register(dev, rdesc, &config);
+ if (IS_ERR(vreg->rdev))
+ return PTR_ERR(vreg->rdev);
+
+ return 0;
+}
+
+static const struct of_device_id qcom_refgen_match_table[] = {
+ { .compatible = "qcom,sdm845-refgen-regulator", .data = &sdm845_refgen_ops },
+ { .compatible = "qcom,sm8250-refgen-regulator", .data = &sm8250_refgen_ops },
+ { }
+};
+
+static struct platform_driver qcom_refgen_driver = {
+ .probe = qcom_refgen_probe,
+ .driver = {
+ .name = "qcom-refgen-regulator",
+ .of_match_table = qcom_refgen_match_table,
+ },
+};
+module_platform_driver(qcom_refgen_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Qualcomm REFGEN regulator driver");
--
2.41.0
More information about the dri-devel
mailing list