[PATCH v2 2/4] regulator: Introduce Qualcomm REFGEN regulator driver

[Konrad Dybcio]

On 29.06.2023 22:35, Konrad Dybcio wrote:
> Modern Qualcomm SoCs have a REFGEN (reference voltage generator)
> regulator, providing reference voltage to on-chip IP, like PHYs.
> 
> Add a driver to support toggling that regulator.
> 
> Signed-off-by: Konrad Dybcio <konrad.dybcio at linaro.org>
> ---
Ugh. Missed the 'const' here and below. LMK if that warrants a resend
(or.. perhaps you just have other comments)

Konrad
> +	.ops = &(struct regulator_ops) {
> +		.enable		= qcom_sdm845_refgen_enable,
> +		.disable	= qcom_sdm845_refgen_disable,
> +		.is_enabled	= qcom_sdm845_refgen_is_enabled,
> +	},
> +};
> +
> +static struct regulator_desc sm8250_refgen_desc = {
> +	.enable_reg = REFGEN_REG_PWRDWN_CTRL5,
> +	.enable_mask = REFGEN_PWRDWN_CTRL5_MASK,
> +	.enable_val = REFGEN_PWRDWN_CTRL5_ENABLE,
> +	.disable_val = 0,
> +	.enable_time = 5,
> +	.name = "refgen",
> +	.owner = THIS_MODULE,
> +	.type = REGULATOR_VOLTAGE,
> +	.ops = &(struct regulator_ops) {
> +		.enable		= regulator_enable_regmap,
> +		.disable	= regulator_disable_regmap,
> +		.is_enabled	= regulator_is_enabled_regmap,
> +	},
> +};
> +
> +static const struct regmap_config qcom_refgen_regmap_config = {
> +	.reg_bits = 32,
> +	.reg_stride = 4,
> +	.val_bits = 32,
> +	.fast_io = true,
> +};
> +
> +static int qcom_refgen_probe(struct platform_device *pdev)
> +{
> +	struct regulator_init_data *init_data;
> +	struct regulator_config config = {};
> +	const struct regulator_desc *rdesc;
> +	struct device *dev = &pdev->dev;
> +	struct regulator_dev *rdev;
> +	struct regmap *regmap;
> +	void __iomem *base;
> +
> +	rdesc = of_device_get_match_data(dev);
> +	if (!rdesc)
> +		return -ENODATA;
> +
> +	base = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(base))
> +		return PTR_ERR(base);
> +
> +	regmap = devm_regmap_init_mmio(dev, base, &qcom_refgen_regmap_config);
> +	if (IS_ERR(regmap))
> +		return PTR_ERR(regmap);
> +
> +	init_data = of_get_regulator_init_data(dev, dev->of_node, rdesc);
> +	if (!init_data)
> +		return -ENOMEM;
> +
> +	config.dev = dev;
> +	config.init_data = init_data;
> +	config.of_node = dev->of_node;
> +	config.regmap = regmap;
> +
> +	rdev = devm_regulator_register(dev, rdesc, &config);
> +	if (IS_ERR(rdev))
> +		return PTR_ERR(rdev);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id qcom_refgen_match_table[] = {
> +	{ .compatible = "qcom,sdm845-refgen-regulator", .data = &sdm845_refgen_desc },
> +	{ .compatible = "qcom,sm8250-refgen-regulator", .data = &sm8250_refgen_desc },
> +	{ }
> +};
> +
> +static struct platform_driver qcom_refgen_driver = {
> +	.probe = qcom_refgen_probe,
> +	.driver = {
> +		.name = "qcom-refgen-regulator",
> +		.of_match_table = qcom_refgen_match_table,
> +	},
> +};
> +module_platform_driver(qcom_refgen_driver);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_DESCRIPTION("Qualcomm REFGEN regulator driver");
>