[PATCH RFC v4 7/7] drm/msm/dpu: Use DRM solid_fill property

[Dmitry Baryshkov]

On 30/06/2023 03:25, Jessica Zhang wrote:
> Drop DPU_PLANE_COLOR_FILL_FLAG and check the DRM solid_fill property to
> determine if the plane is solid fill. In addition drop the DPU plane
> color_fill field as we can now use drm_plane_state.solid_fill instead,
> and pass in drm_plane_state.alpha to _dpu_plane_color_fill_pipe() to
> allow userspace to configure the alpha value for the solid fill color.
> 
> Signed-off-by: Jessica Zhang <quic_jesszhan at quicinc.com>

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>

Minor suggestion below.

> ---
>   drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 21 +++++++++++++++------
>   1 file changed, 15 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
> index 4476722f03bb..11d4fb771a1f 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
> @@ -42,7 +42,6 @@
>   #define SHARP_SMOOTH_THR_DEFAULT	8
>   #define SHARP_NOISE_THR_DEFAULT	2
>   
> -#define DPU_PLANE_COLOR_FILL_FLAG	BIT(31)
>   #define DPU_ZPOS_MAX 255
>   
>   /*
> @@ -82,7 +81,6 @@ struct dpu_plane {
>   
>   	enum dpu_sspp pipe;
>   
> -	uint32_t color_fill;
>   	bool is_error;
>   	bool is_rt_pipe;
>   	const struct dpu_mdss_cfg *catalog;
> @@ -606,6 +604,17 @@ static void _dpu_plane_color_fill_pipe(struct dpu_plane_state *pstate,
>   	_dpu_plane_setup_scaler(pipe, fmt, true, &pipe_cfg, pstate->rotation);
>   }
>   
> +static uint32_t _dpu_plane_get_fill_color(struct drm_solid_fill solid_fill)

Please consider accepting drm_plane_state instead and handling alpha 
here. Then _dpu_color_fill can accept rgba colour instead of separate 
RGB and alpha values.

> +{
> +	uint32_t ret = 0;
> +
> +	ret |= ((uint8_t) solid_fill.b) << 16;
> +	ret |= ((uint8_t) solid_fill.g) << 8;
> +	ret |= ((uint8_t) solid_fill.r);
> +
> +	return ret;
> +}
> +
>   /**
>    * _dpu_plane_color_fill - enables color fill on plane
>    * @pdpu:   Pointer to DPU plane object
> @@ -977,9 +986,9 @@ void dpu_plane_flush(struct drm_plane *plane)
>   	if (pdpu->is_error)
>   		/* force white frame with 100% alpha pipe output on error */
>   		_dpu_plane_color_fill(pdpu, 0xFFFFFF, 0xFF);
> -	else if (pdpu->color_fill & DPU_PLANE_COLOR_FILL_FLAG)
> -		/* force 100% alpha */
> -		_dpu_plane_color_fill(pdpu, pdpu->color_fill, 0xFF);
> +	else if (drm_plane_solid_fill_enabled(plane->state))
> +		_dpu_plane_color_fill(pdpu, _dpu_plane_get_fill_color(plane->state->solid_fill),
> +				plane->state->alpha);
>   	else {
>   		dpu_plane_flush_csc(pdpu, &pstate->pipe);
>   		dpu_plane_flush_csc(pdpu, &pstate->r_pipe);
> @@ -1024,7 +1033,7 @@ static void dpu_plane_sspp_update_pipe(struct drm_plane *plane,
>   	}
>   
>   	/* override for color fill */
> -	if (pdpu->color_fill & DPU_PLANE_COLOR_FILL_FLAG) {
> +	if (drm_plane_solid_fill_enabled(plane->state)) {
>   		_dpu_plane_set_qos_ctrl(plane, pipe, false);
>   
>   		/* skip remaining processing on color fill */
> 

-- 
With best wishes
Dmitry