[PATCH 13/15] drm/msm/hdmi: drop hpd-gpios support

Dmitry Baryshkov dmitry.baryshkov at linaro.org
Fri Jun 30 20:55:21 UTC 2023


Supporting simultaneous check of native HPD and the external GPIO proved
to be less stable than just native HPD. Drop the hpd-gpios support,
leaving just the native HPD support. In case the native HPD doesn't work
the user is urged to switch to specifying the HPD property to the
hdmi-connector device.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
 drivers/gpu/drm/msm/hdmi/hdmi.c     | 14 ++------
 drivers/gpu/drm/msm/hdmi/hdmi.h     |  2 --
 drivers/gpu/drm/msm/hdmi/hdmi_hpd.c | 53 +++--------------------------
 3 files changed, 7 insertions(+), 62 deletions(-)

diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c
index 195e1ac90c5a..598c8284f125 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.c
@@ -478,17 +478,9 @@ static int msm_hdmi_dev_probe(struct platform_device *pdev)
 		return dev_err_probe(dev, PTR_ERR(hdmi->extp_clk),
 				     "failed to get extp clock\n");
 
-	hdmi->hpd_gpiod = devm_gpiod_get_optional(&pdev->dev, "hpd", GPIOD_IN);
-	/* This will catch e.g. -EPROBE_DEFER */
-	if (IS_ERR(hdmi->hpd_gpiod))
-		return dev_err_probe(dev, PTR_ERR(hdmi->hpd_gpiod),
-				     "failed to get hpd gpio\n");
-
-	if (!hdmi->hpd_gpiod)
-		DBG("failed to get HPD gpio");
-
-	if (hdmi->hpd_gpiod)
-		gpiod_set_consumer_name(hdmi->hpd_gpiod, "HDMI_HPD");
+	if (of_find_property(dev->of_node, "hpd-gpios", NULL) ||
+	    of_find_property(dev->of_node, "hpd-gpio", NULL))
+		dev_warn(dev, "hpd-gpios is not supported anymore, please migrate to the hdmi-connector\n");
 
 	ret = msm_hdmi_get_phy(hdmi);
 	if (ret) {
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.h b/drivers/gpu/drm/msm/hdmi/hdmi.h
index acfd99d2876a..252d617939d4 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.h
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.h
@@ -52,8 +52,6 @@ struct hdmi {
 	struct clk_bulk_data *pwr_clks;
 	struct clk *extp_clk;
 
-	struct gpio_desc *hpd_gpiod;
-
 	struct hdmi_phy *phy;
 	struct device *phy_dev;
 
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_hpd.c b/drivers/gpu/drm/msm/hdmi/hdmi_hpd.c
index 4167ba5a3b03..f3d6cc184999 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi_hpd.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi_hpd.c
@@ -69,9 +69,6 @@ int msm_hdmi_hpd_enable(struct drm_bridge *bridge)
 	int ret;
 	unsigned long flags;
 
-	if (hdmi->hpd_gpiod)
-		gpiod_set_value_cansleep(hdmi->hpd_gpiod, 1);
-
 	ret = pm_runtime_resume_and_get(dev);
 	if (ret)
 		return ret;
@@ -145,8 +142,11 @@ void msm_hdmi_hpd_irq(struct drm_bridge *bridge)
 	}
 }
 
-static enum drm_connector_status detect_reg(struct hdmi *hdmi)
+enum drm_connector_status msm_hdmi_bridge_detect(
+		struct drm_bridge *bridge)
 {
+	struct hdmi_bridge *hdmi_bridge = to_hdmi_bridge(bridge);
+	struct hdmi *hdmi = hdmi_bridge->hdmi;
 	uint32_t hpd_int_status = 0;
 	int ret;
 
@@ -162,48 +162,3 @@ static enum drm_connector_status detect_reg(struct hdmi *hdmi)
 	return (hpd_int_status & HDMI_HPD_INT_STATUS_CABLE_DETECTED) ?
 			connector_status_connected : connector_status_disconnected;
 }
-
-#define HPD_GPIO_INDEX	2
-static enum drm_connector_status detect_gpio(struct hdmi *hdmi)
-{
-	return gpiod_get_value(hdmi->hpd_gpiod) ?
-			connector_status_connected :
-			connector_status_disconnected;
-}
-
-enum drm_connector_status msm_hdmi_bridge_detect(
-		struct drm_bridge *bridge)
-{
-	struct hdmi_bridge *hdmi_bridge = to_hdmi_bridge(bridge);
-	struct hdmi *hdmi = hdmi_bridge->hdmi;
-	enum drm_connector_status stat_gpio, stat_reg;
-	int retry = 20;
-
-	/*
-	 * some platforms may not have hpd gpio. Rely only on the status
-	 * provided by REG_HDMI_HPD_INT_STATUS in this case.
-	 */
-	if (!hdmi->hpd_gpiod)
-		return detect_reg(hdmi);
-
-	do {
-		stat_gpio = detect_gpio(hdmi);
-		stat_reg  = detect_reg(hdmi);
-
-		if (stat_gpio == stat_reg)
-			break;
-
-		mdelay(10);
-	} while (--retry);
-
-	/* the status we get from reading gpio seems to be more reliable,
-	 * so trust that one the most if we didn't manage to get hdmi and
-	 * gpio status to agree:
-	 */
-	if (stat_gpio != stat_reg) {
-		DBG("HDMI_HPD_INT_STATUS tells us: %d", stat_reg);
-		DBG("hpd gpio tells us: %d", stat_gpio);
-	}
-
-	return stat_gpio;
-}
-- 
2.39.2



More information about the dri-devel mailing list