[PATCH] dt-bindings: Fix SPI and I2C bus node names in examples

Sam Ravnborg sam at ravnborg.org
Thu Mar 2 16:45:04 UTC 2023


Hi Rob.

>  .../bindings/display/bridge/analogix,anx7625.yaml |  2 +-
>  .../bindings/display/bridge/anx6345.yaml          |  2 +-
>  .../bindings/display/bridge/lontium,lt8912b.yaml  |  2 +-
>  .../bindings/display/bridge/nxp,ptn3460.yaml      |  2 +-
>  .../bindings/display/bridge/ps8640.yaml           |  2 +-
>  .../bindings/display/bridge/sil,sii9234.yaml      |  2 +-
>  .../bindings/display/bridge/ti,dlpc3433.yaml      |  2 +-
>  .../bindings/display/bridge/toshiba,tc358762.yaml |  2 +-
>  .../bindings/display/bridge/toshiba,tc358768.yaml |  2 +-
>  .../bindings/display/panel/nec,nl8048hl11.yaml    |  2 +-
Acked-by: Sam Ravnborg <sam at ravnborg.org>



> index 669f70b1b4c4..8bd58913804a 100644
> --- a/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml
> +++ b/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml
> @@ -226,7 +226,7 @@ unevaluatedProperties: false
>  
>  examples:
>    - |
> -    i2c1 {
> +    i2c {
>              #address-cells = <1>;
>              #size-cells = <0>;
>  
> @@ -239,7 +239,7 @@ examples:
>  
>              ssd1306_i2c: oled at 3d {
>                      compatible = "solomon,ssd1306";
> -                    reg = <0x3c>;
> +                    reg = <0x3d>;
>                      pwms = <&pwm 4 3000>;
>                      reset-gpios = <&gpio2 7>;
>                      solomon,com-lrremap;

I can see this align the example with i2c-mux-gpio.yaml so the change
should be fine. I am just positive surprised the tooling caught it.

The change is
Acked-by: Sam Ravnborg <sam at ravnborg.org>

the above was just me thinking loud.

	Sam


More information about the dri-devel mailing list