[PATCH v4 26/30] drm/msm/dpu: split pipe handling from _dpu_crtc_blend_setup_mixer
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Fri Mar 3 12:57:21 UTC 2023
Rework _dpu_crtc_blend_setup_mixer() to split away pipe handling to a
separate functon. This is a preparation for the r_pipe support.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 79 +++++++++++++++---------
1 file changed, 50 insertions(+), 29 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
index 73e1a8c69ef0..e651e4593280 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
@@ -400,6 +400,46 @@ static void _dpu_crtc_program_lm_output_roi(struct drm_crtc *crtc)
}
}
+static void _dpu_crtc_blend_setup_pipe(struct drm_crtc *crtc,
+ struct drm_plane *plane,
+ struct dpu_crtc_mixer *mixer,
+ u32 num_mixers,
+ enum dpu_stage stage,
+ struct dpu_format *format,
+ uint64_t modifier,
+ struct dpu_sw_pipe *pipe,
+ unsigned int stage_idx,
+ struct dpu_hw_stage_cfg *stage_cfg
+ )
+{
+ uint32_t lm_idx;
+ enum dpu_sspp sspp_idx;
+ struct drm_plane_state *state;
+
+ sspp_idx = pipe->sspp->idx;
+
+ state = plane->state;
+
+ trace_dpu_crtc_setup_mixer(DRMID(crtc), DRMID(plane),
+ state, to_dpu_plane_state(state), stage_idx,
+ format->base.pixel_format,
+ modifier);
+
+ DRM_DEBUG_ATOMIC("crtc %d stage:%d - plane %d sspp %d fb %d\n",
+ crtc->base.id,
+ stage,
+ plane->base.id,
+ sspp_idx - SSPP_NONE,
+ state->fb ? state->fb->base.id : -1);
+
+ stage_cfg->stage[stage][stage_idx] = sspp_idx;
+ stage_cfg->multirect_index[stage][stage_idx] = pipe->multirect_index;
+
+ /* blend config update */
+ for (lm_idx = 0; lm_idx < num_mixers; lm_idx++)
+ mixer[lm_idx].lm_ctl->ops.update_pending_flush_sspp(mixer[lm_idx].lm_ctl, sspp_idx);
+}
+
static void _dpu_crtc_blend_setup_mixer(struct drm_crtc *crtc,
struct dpu_crtc *dpu_crtc, struct dpu_crtc_mixer *mixer,
struct dpu_hw_stage_cfg *stage_cfg)
@@ -412,15 +452,12 @@ static void _dpu_crtc_blend_setup_mixer(struct drm_crtc *crtc,
struct dpu_format *format;
struct dpu_hw_ctl *ctl = mixer->lm_ctl;
- uint32_t stage_idx, lm_idx;
- int zpos_cnt[DPU_STAGE_MAX + 1] = { 0 };
+ uint32_t lm_idx;
bool bg_alpha_enable = false;
DECLARE_BITMAP(fetch_active, SSPP_MAX);
memset(fetch_active, 0, sizeof(fetch_active));
drm_atomic_crtc_for_each_plane(plane, crtc) {
- enum dpu_sspp sspp_idx;
-
state = plane->state;
if (!state)
continue;
@@ -431,39 +468,21 @@ static void _dpu_crtc_blend_setup_mixer(struct drm_crtc *crtc,
pstate = to_dpu_plane_state(state);
fb = state->fb;
- sspp_idx = pstate->pipe.sspp->idx;
- set_bit(sspp_idx, fetch_active);
-
- DRM_DEBUG_ATOMIC("crtc %d stage:%d - plane %d sspp %d fb %d\n",
- crtc->base.id,
- pstate->stage,
- plane->base.id,
- sspp_idx - SSPP_VIG0,
- state->fb ? state->fb->base.id : -1);
-
format = to_dpu_format(msm_framebuffer_format(pstate->base.fb));
if (pstate->stage == DPU_STAGE_BASE && format->alpha_enable)
bg_alpha_enable = true;
- stage_idx = zpos_cnt[pstate->stage]++;
- stage_cfg->stage[pstate->stage][stage_idx] =
- sspp_idx;
- stage_cfg->multirect_index[pstate->stage][stage_idx] =
- pstate->pipe.multirect_index;
-
- trace_dpu_crtc_setup_mixer(DRMID(crtc), DRMID(plane),
- state, pstate, stage_idx,
- format->base.pixel_format,
- fb ? fb->modifier : 0);
+ set_bit(pstate->pipe.sspp->idx, fetch_active);
+ _dpu_crtc_blend_setup_pipe(crtc, plane,
+ mixer, cstate->num_mixers,
+ pstate->stage,
+ format, fb ? fb->modifier : 0,
+ &pstate->pipe, 0, stage_cfg);
/* blend config update */
for (lm_idx = 0; lm_idx < cstate->num_mixers; lm_idx++) {
- _dpu_crtc_setup_blend_cfg(mixer + lm_idx,
- pstate, format);
-
- mixer[lm_idx].lm_ctl->ops.update_pending_flush_sspp(mixer[lm_idx].lm_ctl,
- sspp_idx);
+ _dpu_crtc_setup_blend_cfg(mixer + lm_idx, pstate, format);
if (bg_alpha_enable && !format->alpha_enable)
mixer[lm_idx].mixer_op_mode = 0;
@@ -1297,6 +1316,8 @@ static int _dpu_debugfs_status_show(struct seq_file *s, void *data)
seq_printf(s, "\tdst x:%4d dst_y:%4d dst_w:%4d dst_h:%4d\n",
state->crtc_x, state->crtc_y, state->crtc_w,
state->crtc_h);
+ seq_printf(s, "\tsspp:%s\n",
+ pstate->pipe.sspp->cap->name);
seq_printf(s, "\tmultirect: mode: %d index: %d\n",
pstate->pipe.multirect_mode, pstate->pipe.multirect_index);
--
2.39.2
More information about the dri-devel
mailing list