[PATCH v7 22/32] drm/msm/dpu: rework dpu_plane_sspp_atomic_update()
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Thu Mar 16 16:16:43 UTC 2023
Split pipe-dependent code from dpu_plane_sspp_atomic_update() into the
separate function dpu_plane_sspp_update_pipe(). This is one of
preparational steps to add r_pipe support.
Reviewed-by: Abhinav Kumar <quic_abhinavk at quicinc.com>
Tested-by: Abhinav Kumar <quic_abhinavk at quicinc.com> # sc7280
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 113 ++++++++++++----------
1 file changed, 63 insertions(+), 50 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
index 9c556ba9cb7b..f97ea39423a2 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
@@ -404,12 +404,13 @@ static void _dpu_plane_set_qos_ctrl(struct drm_plane *plane,
* _dpu_plane_set_ot_limit - set OT limit for the given plane
* @plane: Pointer to drm plane
* @pipe: Pointer to software pipe
- * @crtc: Pointer to drm crtc
* @pipe_cfg: Pointer to pipe configuration
+ * @frame_rate: CRTC's frame rate
*/
static void _dpu_plane_set_ot_limit(struct drm_plane *plane,
struct dpu_sw_pipe *pipe,
- struct drm_crtc *crtc, struct dpu_sw_pipe_cfg *pipe_cfg)
+ struct dpu_sw_pipe_cfg *pipe_cfg,
+ int frame_rate)
{
struct dpu_plane *pdpu = to_dpu_plane(plane);
struct dpu_vbif_set_ot_params ot_params;
@@ -421,7 +422,7 @@ static void _dpu_plane_set_ot_limit(struct drm_plane *plane,
ot_params.width = drm_rect_width(&pipe_cfg->src_rect);
ot_params.height = drm_rect_height(&pipe_cfg->src_rect);
ot_params.is_wfd = !pdpu->is_rt_pipe;
- ot_params.frame_rate = drm_mode_vrefresh(&crtc->mode);
+ ot_params.frame_rate = frame_rate;
ot_params.vbif_idx = VBIF_RT;
ot_params.clk_ctrl = pipe->sspp->cap->clk_ctrl;
ot_params.rd = true;
@@ -457,26 +458,6 @@ static void _dpu_plane_set_qos_remap(struct drm_plane *plane,
dpu_vbif_set_qos_remap(dpu_kms, &qos_params);
}
-static void _dpu_plane_set_scanout(struct drm_plane *plane,
- struct dpu_plane_state *pstate,
- struct drm_framebuffer *fb)
-{
- struct dpu_plane *pdpu = to_dpu_plane(plane);
- struct dpu_kms *kms = _dpu_plane_get_kms(&pdpu->base);
- struct msm_gem_address_space *aspace = kms->base.aspace;
- struct dpu_hw_fmt_layout layout;
- int ret;
-
- ret = dpu_format_populate_layout(aspace, fb, &layout);
- if (ret)
- DPU_ERROR_PLANE(pdpu, "failed to get format layout, %d\n", ret);
- else if (pstate->pipe.sspp->ops.setup_sourceaddress) {
- trace_dpu_plane_set_scanout(&pstate->pipe,
- &layout);
- pstate->pipe.sspp->ops.setup_sourceaddress(&pstate->pipe, &layout);
- }
-}
-
static void _dpu_plane_setup_scaler3(struct dpu_hw_sspp *pipe_hw,
uint32_t src_w, uint32_t src_h, uint32_t dst_w, uint32_t dst_h,
struct dpu_hw_scaler3_cfg *scale_cfg,
@@ -1103,35 +1084,25 @@ void dpu_plane_set_error(struct drm_plane *plane, bool error)
pdpu->is_error = error;
}
-static void dpu_plane_sspp_atomic_update(struct drm_plane *plane)
+static void dpu_plane_sspp_update_pipe(struct drm_plane *plane,
+ struct dpu_sw_pipe *pipe,
+ struct dpu_sw_pipe_cfg *pipe_cfg,
+ const struct dpu_format *fmt,
+ int frame_rate,
+ struct dpu_hw_fmt_layout *layout)
{
uint32_t src_flags;
struct dpu_plane *pdpu = to_dpu_plane(plane);
struct drm_plane_state *state = plane->state;
struct dpu_plane_state *pstate = to_dpu_plane_state(state);
- struct dpu_sw_pipe *pipe = &pstate->pipe;
- struct drm_crtc *crtc = state->crtc;
- struct drm_framebuffer *fb = state->fb;
- bool is_rt_pipe;
- const struct dpu_format *fmt =
- to_dpu_format(msm_framebuffer_format(fb));
- struct dpu_sw_pipe_cfg *pipe_cfg = &pstate->pipe_cfg;
- _dpu_plane_set_scanout(plane, pstate, fb);
-
- pstate->pending = true;
-
- is_rt_pipe = (dpu_crtc_get_client_type(crtc) != NRT_CLIENT);
- pstate->needs_qos_remap |= (is_rt_pipe != pdpu->is_rt_pipe);
- pdpu->is_rt_pipe = is_rt_pipe;
+ if (layout && pipe->sspp->ops.setup_sourceaddress) {
+ trace_dpu_plane_set_scanout(pipe, layout);
+ pipe->sspp->ops.setup_sourceaddress(pipe, layout);
+ }
_dpu_plane_set_qos_ctrl(plane, pipe, false, DPU_PLANE_QOS_PANIC_CTRL);
- DPU_DEBUG_PLANE(pdpu, "FB[%u] " DRM_RECT_FP_FMT "->crtc%u " DRM_RECT_FMT
- ", %4.4s ubwc %d\n", fb->base.id, DRM_RECT_FP_ARG(&state->src),
- crtc->base.id, DRM_RECT_ARG(&state->dst),
- (char *)&fmt->base.pixel_format, DPU_FORMAT_IS_UBWC(fmt));
-
/* override for color fill */
if (pdpu->color_fill & DPU_PLANE_COLOR_FILL_FLAG) {
/* skip remaining processing on color fill */
@@ -1184,23 +1155,65 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane)
}
}
- _dpu_plane_set_qos_lut(plane, pipe, fmt, &pstate->pipe_cfg);
+ _dpu_plane_set_qos_lut(plane, pipe, fmt, pipe_cfg);
_dpu_plane_set_danger_lut(plane, pipe, fmt);
if (plane->type != DRM_PLANE_TYPE_CURSOR) {
_dpu_plane_set_qos_ctrl(plane, pipe, true, DPU_PLANE_QOS_PANIC_CTRL);
- _dpu_plane_set_ot_limit(plane, pipe, crtc, &pstate->pipe_cfg);
+ _dpu_plane_set_ot_limit(plane, pipe, pipe_cfg, frame_rate);
}
- if (pstate->needs_qos_remap) {
- pstate->needs_qos_remap = false;
+ if (pstate->needs_qos_remap)
_dpu_plane_set_qos_remap(plane, pipe);
- }
+}
+
+static void dpu_plane_sspp_atomic_update(struct drm_plane *plane)
+{
+ struct dpu_plane *pdpu = to_dpu_plane(plane);
+ struct drm_plane_state *state = plane->state;
+ struct dpu_plane_state *pstate = to_dpu_plane_state(state);
+ struct dpu_sw_pipe *pipe = &pstate->pipe;
+ struct drm_crtc *crtc = state->crtc;
+ struct drm_framebuffer *fb = state->fb;
+ bool is_rt_pipe;
+ const struct dpu_format *fmt =
+ to_dpu_format(msm_framebuffer_format(fb));
+ struct dpu_sw_pipe_cfg *pipe_cfg = &pstate->pipe_cfg;
+
+ struct dpu_kms *kms = _dpu_plane_get_kms(&pdpu->base);
+ struct msm_gem_address_space *aspace = kms->base.aspace;
+ struct dpu_hw_fmt_layout layout;
+ bool layout_valid = false;
+ int ret;
+
+ ret = dpu_format_populate_layout(aspace, fb, &layout);
+ if (ret)
+ DPU_ERROR_PLANE(pdpu, "failed to get format layout, %d\n", ret);
+ else
+ layout_valid = true;
+
+ pstate->pending = true;
+
+ is_rt_pipe = (dpu_crtc_get_client_type(crtc) != NRT_CLIENT);
+ pstate->needs_qos_remap |= (is_rt_pipe != pdpu->is_rt_pipe);
+ pdpu->is_rt_pipe = is_rt_pipe;
+
+ DPU_DEBUG_PLANE(pdpu, "FB[%u] " DRM_RECT_FP_FMT "->crtc%u " DRM_RECT_FMT
+ ", %4.4s ubwc %d\n", fb->base.id, DRM_RECT_FP_ARG(&state->src),
+ crtc->base.id, DRM_RECT_ARG(&state->dst),
+ (char *)&fmt->base.pixel_format, DPU_FORMAT_IS_UBWC(fmt));
+
+ dpu_plane_sspp_update_pipe(plane, pipe, pipe_cfg, fmt,
+ drm_mode_vrefresh(&crtc->mode),
+ layout_valid ? &layout : NULL);
+
+ if (pstate->needs_qos_remap)
+ pstate->needs_qos_remap = false;
pstate->plane_fetch_bw = _dpu_plane_calc_bw(pdpu->catalog, fmt,
- &crtc->mode, &pstate->pipe_cfg);
+ &crtc->mode, pipe_cfg);
- pstate->plane_clk = _dpu_plane_calc_clk(&crtc->mode, &pstate->pipe_cfg);
+ pstate->plane_clk = _dpu_plane_calc_clk(&crtc->mode, pipe_cfg);
}
static void _dpu_plane_atomic_disable(struct drm_plane *plane)
--
2.30.2
More information about the dri-devel
mailing list