[PATCH 6/8] arm64: dts: qcom: sm8450: remove invalid npl clock in vamacro node

[Neil Armstrong]

Fixes the following DT bindings check error:
codec at 33f0000: clocks: [[137, 57, 1], [137, 102, 1], [137, 103, 1], [137, 70, 1]] is too long
codec at 33f0000: clock-names: 'oneOf' conditional failed, one must be fixed:
	        ['mclk', 'macro', 'dcodec', 'npl'] is too long

The implementation was checked and this npl clock isn't used for the VA macro.

Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8450.dtsi | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index bcb51e612261..ef9bae2e6acc 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -2321,9 +2321,8 @@ vamacro: codec at 33f0000 {
 			reg = <0 0x033f0000 0 0x1000>;
 			clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
-				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
-				 <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			clock-names = "mclk", "macro", "dcodec", "npl";
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "mclk", "macro", "dcodec";
 			assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
 			assigned-clock-rates = <19200000>;
 

-- 
2.34.1