[PATCH] drm/i915/guc: Disable PL1 power limit when loading GuC firmware

[Belgaumkar, Vinay]

On 3/15/2023 8:59 PM, Ashutosh Dixit wrote:
> On dGfx, the PL1 power limit being enabled and set to a low value results
> in a low GPU operating freq. It also negates the freq raise operation which
> is done before GuC firmware load. As a result GuC firmware load can time
> out. Such timeouts were seen in the GL #8062 bug below (where the PL1 power
> limit was enabled and set to a low value). Therefore disable the PL1 power
> limit when allowed by HW when loading GuC firmware.
v3 label missing in subject.
>
> v2:
>   - Take mutex (to disallow writes to power1_max) across GuC reset/fw load
>   - Add hwm_power_max_restore to error return code path
>
> v3 (Jani N):
>   - Add/remove explanatory comments
>   - Function renames
>   - Type corrections
>   - Locking annotation
>
> Link: https://gitlab.freedesktop.org/drm/intel/-/issues/8062
> Signed-off-by: Ashutosh Dixit <ashutosh.dixit at intel.com>
> ---
>   drivers/gpu/drm/i915/gt/uc/intel_uc.c |  9 +++++++
>   drivers/gpu/drm/i915/i915_hwmon.c     | 39 +++++++++++++++++++++++++++
>   drivers/gpu/drm/i915/i915_hwmon.h     |  7 +++++
>   3 files changed, 55 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/gt/uc/intel_uc.c b/drivers/gpu/drm/i915/gt/uc/intel_uc.c
> index 4ccb4be4c9cba..aa8e35a5636a0 100644
> --- a/drivers/gpu/drm/i915/gt/uc/intel_uc.c
> +++ b/drivers/gpu/drm/i915/gt/uc/intel_uc.c
> @@ -18,6 +18,7 @@
>   #include "intel_uc.h"
>   
>   #include "i915_drv.h"
> +#include "i915_hwmon.h"
>   
>   static const struct intel_uc_ops uc_ops_off;
>   static const struct intel_uc_ops uc_ops_on;
> @@ -461,6 +462,7 @@ static int __uc_init_hw(struct intel_uc *uc)
>   	struct intel_guc *guc = &uc->guc;
>   	struct intel_huc *huc = &uc->huc;
>   	int ret, attempts;
> +	bool pl1en;

Init to 'false' here


>   
>   	GEM_BUG_ON(!intel_uc_supports_guc(uc));
>   	GEM_BUG_ON(!intel_uc_wants_guc(uc));
> @@ -491,6 +493,9 @@ static int __uc_init_hw(struct intel_uc *uc)
>   	else
>   		attempts = 1;
>   
> +	/* Disable a potentially low PL1 power limit to allow freq to be raised */
> +	i915_hwmon_power_max_disable(gt->i915, &pl1en);
> +
>   	intel_rps_raise_unslice(&uc_to_gt(uc)->rps);
>   
>   	while (attempts--) {
> @@ -547,6 +552,8 @@ static int __uc_init_hw(struct intel_uc *uc)
>   		intel_rps_lower_unslice(&uc_to_gt(uc)->rps);
>   	}
>   
> +	i915_hwmon_power_max_restore(gt->i915, pl1en);
> +
>   	guc_info(guc, "submission %s\n", str_enabled_disabled(intel_uc_uses_guc_submission(uc)));
>   	guc_info(guc, "SLPC %s\n", str_enabled_disabled(intel_uc_uses_guc_slpc(uc)));
>   
> @@ -563,6 +570,8 @@ static int __uc_init_hw(struct intel_uc *uc)
>   	/* Return GT back to RPn */
>   	intel_rps_lower_unslice(&uc_to_gt(uc)->rps);
>   
> +	i915_hwmon_power_max_restore(gt->i915, pl1en);

if (pl1en)

     i915_hwmon_power_max_enable().

> +
>   	__uc_sanitize(uc);
>   
>   	if (!ret) {
> diff --git a/drivers/gpu/drm/i915/i915_hwmon.c b/drivers/gpu/drm/i915/i915_hwmon.c
> index ee63a8fd88fc1..769b5bda4d53f 100644
> --- a/drivers/gpu/drm/i915/i915_hwmon.c
> +++ b/drivers/gpu/drm/i915/i915_hwmon.c
> @@ -444,6 +444,45 @@ hwm_power_write(struct hwm_drvdata *ddat, u32 attr, int chan, long val)
>   	}
>   }
>   
> +void i915_hwmon_power_max_disable(struct drm_i915_private *i915, bool *old)
Shouldn't we call this i915_hwmon_package_pl1_disable()?
> +	__acquires(i915->hwmon->hwmon_lock)
> +{
> +	struct i915_hwmon *hwmon = i915->hwmon;
> +	intel_wakeref_t wakeref;
> +	u32 r;
> +
> +	if (!hwmon || !i915_mmio_reg_valid(hwmon->rg.pkg_rapl_limit))
> +		return;
> +
> +	/* Take mutex to prevent concurrent hwm_power_max_write */
> +	mutex_lock(&hwmon->hwmon_lock);
> +
> +	with_intel_runtime_pm(hwmon->ddat.uncore->rpm, wakeref)
> +		r = intel_uncore_rmw(hwmon->ddat.uncore,
> +				     hwmon->rg.pkg_rapl_limit,
> +				     PKG_PWR_LIM_1_EN, 0);
Most of this code (lock and rmw parts) is already inside static void
hwm_locked_with_pm_intel_uncore_rmw() , can we reuse that here?
> +
> +	*old = !!(r & PKG_PWR_LIM_1_EN);
> +}
> +
> +void i915_hwmon_power_max_restore(struct drm_i915_private *i915, bool old)
> +	__releases(i915->hwmon->hwmon_lock)
We can just call this i915_hwmon_power_max_enable() and call whenever 
the old value was actually enabled. That way, we have proper mirror 
functions.
> +{
> +	struct i915_hwmon *hwmon = i915->hwmon;
> +	intel_wakeref_t wakeref;
> +
> +	if (!hwmon || !i915_mmio_reg_valid(hwmon->rg.pkg_rapl_limit))
> +		return;
> +
> +	with_intel_runtime_pm(hwmon->ddat.uncore->rpm, wakeref)
> +		intel_uncore_rmw(hwmon->ddat.uncore,
> +				 hwmon->rg.pkg_rapl_limit,
> +				 PKG_PWR_LIM_1_EN,
> +				 old ? PKG_PWR_LIM_1_EN : 0);

3rd param should be 0 here, else we will end up clearing other bits.

Thanks,

Vinay.

> +
> +	mutex_unlock(&hwmon->hwmon_lock);
> +}
> +
>   static umode_t
>   hwm_energy_is_visible(const struct hwm_drvdata *ddat, u32 attr)
>   {
> diff --git a/drivers/gpu/drm/i915/i915_hwmon.h b/drivers/gpu/drm/i915/i915_hwmon.h
> index 7ca9cf2c34c96..0fcb7de844061 100644
> --- a/drivers/gpu/drm/i915/i915_hwmon.h
> +++ b/drivers/gpu/drm/i915/i915_hwmon.h
> @@ -7,14 +7,21 @@
>   #ifndef __I915_HWMON_H__
>   #define __I915_HWMON_H__
>   
> +#include <linux/types.h>
> +
>   struct drm_i915_private;
> +struct intel_gt;
>   
>   #if IS_REACHABLE(CONFIG_HWMON)
>   void i915_hwmon_register(struct drm_i915_private *i915);
>   void i915_hwmon_unregister(struct drm_i915_private *i915);
> +void i915_hwmon_power_max_disable(struct drm_i915_private *i915, bool *old);
> +void i915_hwmon_power_max_restore(struct drm_i915_private *i915, bool old);
>   #else
>   static inline void i915_hwmon_register(struct drm_i915_private *i915) { };
>   static inline void i915_hwmon_unregister(struct drm_i915_private *i915) { };
> +static inline void i915_hwmon_power_max_disable(struct drm_i915_private *i915, bool *old) { };
> +static inline void i915_hwmon_power_max_restore(struct drm_i915_private *i915, bool old) { };
>   #endif
>   
>   #endif /* __I915_HWMON_H__ */