[PATCH] drm/nouveau: Fix bug in buffer relocs for Nouveau

[Christian König]

Am 27.03.23 um 10:42 schrieb John Ogness:
> On 2023-01-19, Tanmay Bhushan <007047221b at gmail.com> wrote:
>> dma_resv_wait_timeout returns greater than zero on success
>> as opposed to ttm_bo_wait_ctx. As a result of that relocs
>> will fail and give failure even when it was a success.
> Today I switched my workstation from 6.2 to 6.3-rc3 and started seeing
> lots of new kernel messages:
>
> [  642.138313][ T1751] nouveau 0000:f0:10.0: X[1751]: reloc wait_idle failed: 1500
> [  642.138389][ T1751] nouveau 0000:f0:10.0: X[1751]: reloc apply: 1500
> [  646.123490][ T1751] nouveau 0000:f0:10.0: X[1751]: reloc wait_idle failed: 1500
> [  646.123573][ T1751] nouveau 0000:f0:10.0: X[1751]: reloc apply: 1500
>
> The graphics seemed to go slower or hang a bit when these messages would
> appear. I then found your patch! However, I have some comments about it.
>
> First, it should include a fixes tag:
>
> Fixes: 41d351f29528 ("drm/nouveau: stop using ttm_bo_wait")
>
>> Signed-off-by: Tanmay Bhushan <007047221b at gmail.com>
>> ---
>>   drivers/gpu/drm/nouveau/nouveau_gem.c | 3 +--
>>   1 file changed, 1 insertion(+), 2 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/nouveau/nouveau_gem.c b/drivers/gpu/drm/nouveau/nouveau_gem.c
>> index f77e44958037..0e3690459144 100644
>> --- a/drivers/gpu/drm/nouveau/nouveau_gem.c
>> +++ b/drivers/gpu/drm/nouveau/nouveau_gem.c
>> @@ -706,9 +706,8 @@ nouveau_gem_pushbuf_reloc_apply(struct nouveau_cli *cli,
>>   		ret = dma_resv_wait_timeout(nvbo->bo.base.resv,
>>   					    DMA_RESV_USAGE_BOOKKEEP,
>>   					    false, 15 * HZ);
>> -		if (ret == 0)
>> +		if (ret <= 0) {
>>   			ret = -EBUSY;
> This is incorrect for 2 reasons:
>
> * it treats restarts as timeouts
>
> * this function now returns >0 on success
>
>> -		if (ret) {
>>   			NV_PRINTK(err, cli, "reloc wait_idle failed: %ld\n",
>>   				  ret);
>>   			break;
> I rearranged things to basically correctly translate the return code of
> dma_resv_wait_timeout() to match the previous ttm_bo_wait():
>
> 		ret = dma_resv_wait_timeout(nvbo->bo.base.resv,
> 					    DMA_RESV_USAGE_BOOKKEEP,
> 					    false, 15 * HZ);
> 		if (ret == 0)
> 			ret = -EBUSY;
> 		if (ret > 0)
> 			ret = 0;
> 		if (ret) {
> 			NV_PRINTK(err, cli, "reloc wait_idle failed: %ld\n",
> 				  ret);
> 			break;
> 		}
>
> So the patch just becomes:
>
> @@ -708,6 +708,8 @@ nouveau_gem_pushbuf_reloc_apply(struct n
>   					    false, 15 * HZ);
>   		if (ret == 0)
>   			ret = -EBUSY;
> +		if (ret > 0)
> +			ret = 0;
>   		if (ret) {
>   			NV_PRINTK(err, cli, "reloc wait_idle failed: %ld\n",
>   				  ret);
>
> With this variant, everything runs correctly on my workstation again.
>
> It probably deserves a comment about why @ret is being translated. Or
> perhaps a new variable should be introduced to separate the return value
> of dma_resv_wait_timeout() from the return value of this function.

I'm going to take a look tomorrow, but your code already looks pretty 
correct to me.

And sorry for the noise, missed the different in the conversion.

Thanks,
Christian.

>
> Either way, this is an important fix for 6.3-rc!
>
> John Ogness