[PATCH v3 09/10] drm/display/dsc: add helper to set semi-const parameters
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Wed Mar 29 00:37:09 UTC 2023
Add a helper setting config values which are typically constant across
operating modes (table E-4 of the standard) and mux_word_size (which is
a const according to 3.5.2).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
drivers/gpu/drm/display/drm_dsc_helper.c | 21 +++++++++++++++++++++
include/drm/display/drm_dsc_helper.h | 1 +
2 files changed, 22 insertions(+)
diff --git a/drivers/gpu/drm/display/drm_dsc_helper.c b/drivers/gpu/drm/display/drm_dsc_helper.c
index 65e810a54257..10ba413d8bf1 100644
--- a/drivers/gpu/drm/display/drm_dsc_helper.c
+++ b/drivers/gpu/drm/display/drm_dsc_helper.c
@@ -270,6 +270,27 @@ void drm_dsc_pps_payload_pack(struct drm_dsc_picture_parameter_set *pps_payload,
}
EXPORT_SYMBOL(drm_dsc_pps_payload_pack);
+/**
+ * drm_dsc_set_const_params() - Set DSC parameters considered typically
+ * constant across operation modes
+ *
+ * @vdsc_cfg:
+ * DSC Configuration data partially filled by driver
+ */
+void drm_dsc_set_const_params(struct drm_dsc_config *vdsc_cfg)
+{
+ vdsc_cfg->rc_model_size = DSC_RC_MODEL_SIZE_CONST;
+ vdsc_cfg->rc_edge_factor = DSC_RC_EDGE_FACTOR_CONST;
+ vdsc_cfg->rc_tgt_offset_high = DSC_RC_TGT_OFFSET_HI_CONST;
+ vdsc_cfg->rc_tgt_offset_low = DSC_RC_TGT_OFFSET_LO_CONST;
+
+ if (vdsc_cfg->bits_per_component <= 10)
+ vdsc_cfg->mux_word_size = DSC_MUX_WORD_SIZE_8_10_BPC;
+ else
+ vdsc_cfg->mux_word_size = DSC_MUX_WORD_SIZE_12_BPC;
+}
+EXPORT_SYMBOL(drm_dsc_set_const_params);
+
/* From DSC_v1.11 spec, rc_parameter_Set syntax element typically constant */
static const u16 drm_dsc_rc_buf_thresh[] = {
896, 1792, 2688, 3584, 4480, 5376, 6272, 6720, 7168, 7616,
diff --git a/include/drm/display/drm_dsc_helper.h b/include/drm/display/drm_dsc_helper.h
index 0bb0c3afd740..4448c482b092 100644
--- a/include/drm/display/drm_dsc_helper.h
+++ b/include/drm/display/drm_dsc_helper.h
@@ -21,6 +21,7 @@ void drm_dsc_dp_pps_header_init(struct dp_sdp_header *pps_header);
int drm_dsc_dp_rc_buffer_size(u8 rc_buffer_block_size, u8 rc_buffer_size);
void drm_dsc_pps_payload_pack(struct drm_dsc_picture_parameter_set *pps_sdp,
const struct drm_dsc_config *dsc_cfg);
+void drm_dsc_set_const_params(struct drm_dsc_config *vdsc_cfg);
void drm_dsc_set_rc_buf_thresh(struct drm_dsc_config *vdsc_cfg);
int drm_dsc_setup_rc_params(struct drm_dsc_config *vdsc_cfg, enum drm_dsc_params_kind kind);
int drm_dsc_compute_rc_parameters(struct drm_dsc_config *vdsc_cfg);
--
2.39.2
More information about the dri-devel
mailing list