[PATCH v1 1/2] dt-bindings: display: bridge: sn65dsi83: Add DSI video mode

[Francesco Dolcini]

From: Francesco Dolcini <francesco.dolcini at toradex.com>

SN65DSI8[34] device supports burst video mode and non-burst video mode
with sync events or with sync pulses packet transmission as described in
the DSI specification.

Add property to select the expected mode, this allows for example to
select a mode that is compatible with the DSI host interface.

Signed-off-by: Francesco Dolcini <francesco.dolcini at toradex.com>
---
 .../devicetree/bindings/display/bridge/ti,sn65dsi83.yaml  | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml
index 48a97bb3e2e0..ebee16726b02 100644
--- a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml
@@ -35,6 +35,14 @@ properties:
   vcc-supply:
     description: A 1.8V power supply (see regulator/regulator.yaml).
 
+  dsi-video-mode:
+    description: |
+      0 - burst-mode
+      1 - non-burst with sync event
+      2 - non-burst with sync pulse
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
-- 
2.25.1