[RFC][PATCH v2 1/3] drm: Introduce plane SIZE_HINTS property
Pekka Paalanen
pekka.paalanen at collabora.com
Thu Mar 30 10:29:54 UTC 2023
On Tue, 21 Mar 2023 16:36:41 +0200
Ville Syrjala <ville.syrjala at linux.intel.com> wrote:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
>
> Add a new immutable plane property by which a plane can advertise
> a handful of recommended plane sizes. This would be mostly exposed
> by cursor planes as a slightly more capable replacement for
> the DRM_CAP_CURSOR_WIDTH/HEIGHT caps, which can only declare
> a one size fits all limit for the whole device.
>
> Currently eg. amdgpu/i915/nouveau just advertize the max cursor
> size via the cursor size caps. But always using the max sized
> cursor can waste a surprising amount of power, so a better
> stragey is desirable.
>
> Most other drivers don't specify any cursor size at all, in
> which case the ioctl code just claims that 64x64 is a great
> choice. Whether that is actually true is debatable.
>
> A poll of various compositor developers informs us that
> blindly probing with setcursor/atomic ioctl to determine
> suitable cursor sizes is not acceptable, thus the
> introduction of the new property to supplant the cursor
> size caps. The compositor will now be free to select a
> more optimal cursor size from the short list of options.
>
> The blob contains explicit min and max plane sizes, as
> well as a 2D bitmap representing all the square and non-square
> power of two sizes between the min and max.
>
> Note that the reported sizes (either via the property or the
> caps) make no claims about things such as plane scaling. So
> these things should only really be consulted for simple
> "cursor like" use cases.
>
> v2: Try to add some docs
> v3: Specify that value 0 is reserved for future use (basic idea from Jonas)
> Drop the note about typical hardware (Pekka)
> v4: Total redesign to include the 2D bitmap
>
> Cc: Simon Ser <contact at emersion.fr>
> Cc: Jonas Ådahl <jadahl at redhat.com>
> Cc: Daniel Stone <daniel at fooishbar.org>
> Cc: Pekka Paalanen <pekka.paalanen at collabora.com>
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> ---
> drivers/gpu/drm/drm_mode_config.c | 7 +++
> drivers/gpu/drm/drm_plane.c | 96 +++++++++++++++++++++++++++++++
> include/drm/drm_mode_config.h | 5 ++
> include/drm/drm_plane.h | 6 ++
> include/uapi/drm/drm_mode.h | 29 ++++++++++
> 5 files changed, 143 insertions(+)
>
> diff --git a/drivers/gpu/drm/drm_mode_config.c b/drivers/gpu/drm/drm_mode_config.c
> index 87eb591fe9b5..21860f94a18c 100644
> --- a/drivers/gpu/drm/drm_mode_config.c
> +++ b/drivers/gpu/drm/drm_mode_config.c
> @@ -374,6 +374,13 @@ static int drm_mode_create_standard_properties(struct drm_device *dev)
> return -ENOMEM;
> dev->mode_config.modifiers_property = prop;
>
> + prop = drm_property_create(dev,
> + DRM_MODE_PROP_IMMUTABLE | DRM_MODE_PROP_BLOB,
> + "SIZE_HINTS", 0);
> + if (!prop)
> + return -ENOMEM;
> + dev->mode_config.size_hints_property = prop;
> +
> return 0;
> }
>
> diff --git a/drivers/gpu/drm/drm_plane.c b/drivers/gpu/drm/drm_plane.c
> index 24e7998d1731..fb9cee504767 100644
> --- a/drivers/gpu/drm/drm_plane.c
> +++ b/drivers/gpu/drm/drm_plane.c
> @@ -140,6 +140,27 @@
> * DRM_FORMAT_MOD_LINEAR. Before linux kernel release v5.1 there have been
> * various bugs in this area with inconsistencies between the capability
> * flag and per-plane properties.
> + *
> + * SIZE_HINTS:
> + * Blob property which contains the set of recommended plane size
> + * which can used for simple "cursor like" use cases (eg. no scaling).
> + * Using these hints frees userspace from extensive probing of
> + * supported plane sizes through atomic/setcursor ioctls.
> + *
> + * For optimal usage userspace should pick the smallest size
> + * that satisfies its own requirements.
> + *
> + * The blob contains explicit min/max sizes, as well as a 2D bitmap
> + * representign all square and non-square POT sizes between.
> + *
> + * Drivers should only attach this property to planes that
> + * support a very limited set of sizes.
> + *
> + * Note that property value 0 (ie. no blob) is reserved for potential
> + * future use. Current userspace is expected to ignore the property
> + * if the value is 0, and fall back to some other means (eg.
> + * &DRM_CAP_CURSOR_WIDTH and &DRM_CAP_CURSOR_HEIGHT) to determine
> + * the appropriate plane size to use.
> */
>
> static unsigned int drm_num_planes(struct drm_device *dev)
> @@ -1582,3 +1603,78 @@ int drm_plane_create_scaling_filter_property(struct drm_plane *plane,
> return 0;
> }
> EXPORT_SYMBOL(drm_plane_create_scaling_filter_property);
> +
> +static int hint_dim(int x, int x0, int w, int min, int max)
> +{
> + if (x == 0)
> + return min;
> + else if (x == w - 1)
> + return max;
> + else
> + return 1 << (x0 + x);
> +}
> +
> +/**
> + * drm_plane_add_size_hint_property - create a size hint property
> + *
> + * @plane: drm plane
> + * @min_width: minimum width
> + * @min_height: minimum height
> + * @max_width: maximum width
> + * @max_height: maximum height
> + * @cursor_size_ok: function to check if specified size is ok
> + *
> + * Create a size hints property for the plane.
> + *
> + * RETURNS:
> + * Zero for success or -errno
> + */
> +int drm_plane_add_size_hints_property(struct drm_plane *plane,
> + int min_width, int min_height,
> + int max_width, int max_height,
> + bool (*size_ok)(struct drm_plane *plane,
> + int width, int height))
> +{
> + struct drm_device *dev = plane->dev;
> + struct drm_mode_config *config = &dev->mode_config;
> + struct drm_property_blob *blob;
> + struct drm_plane_size_hint *hints;
> + int x, y, x0, y0, w, h;
> +
> + x0 = fls(min_width) - 1;
> + y0 = fls(min_height) - 1;
> + w = fls(2 * max_width - 1) - x0;
> + h = fls(2 * max_height - 1) - y0;
> +
> + blob = drm_property_create_blob(dev,
> + struct_size(hints, bitmap,
> + DIV_ROUND_UP(w * h, 32)),
> + NULL);
> + if (IS_ERR(blob))
> + return PTR_ERR(blob);
> +
> + hints = blob->data;
> +
> + hints->min_width = min_width;
> + hints->min_height = min_height;
> + hints->max_width = max_width;
> + hints->max_height = max_height;
> +
> + for (y = 0; y < h; y++) {
> + int height = hint_dim(y, y0, h, min_height, max_height);
> +
> + for (x = 0; x < w; x++) {
> + int width = hint_dim(x, x0, w, min_width, max_width);
> + unsigned int bit = y * w + x;
> +
> + if (size_ok(plane, width, height))
> + hints->bitmap[bit/32] |= 1 << (bit & 31);
> + }
> + }
> +
> + drm_object_attach_property(&plane->base, config->size_hints_property,
> + blob->base.id);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(drm_plane_add_size_hints_property);
> diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
> index e5b053001d22..d5495c0804c5 100644
> --- a/include/drm/drm_mode_config.h
> +++ b/include/drm/drm_mode_config.h
> @@ -949,6 +949,11 @@ struct drm_mode_config {
> */
> struct drm_property *modifiers_property;
>
> + /**
> + * @size_hints_propertty: Plane size hints property.
> + */
> + struct drm_property *size_hints_property;
> +
> /* cursor size */
> uint32_t cursor_width, cursor_height;
>
> diff --git a/include/drm/drm_plane.h b/include/drm/drm_plane.h
> index 51291983ea44..6d7326f15761 100644
> --- a/include/drm/drm_plane.h
> +++ b/include/drm/drm_plane.h
> @@ -32,6 +32,7 @@
> #include <drm/drm_util.h>
>
> struct drm_crtc;
> +struct drm_plane_size_hint;
> struct drm_printer;
> struct drm_modeset_acquire_ctx;
>
> @@ -945,5 +946,10 @@ drm_plane_get_damage_clips(const struct drm_plane_state *state);
>
> int drm_plane_create_scaling_filter_property(struct drm_plane *plane,
> unsigned int supported_filters);
> +int drm_plane_add_size_hints_property(struct drm_plane *plane,
> + int min_width, int min_height,
> + int max_width, int max_height,
> + bool (*size_ok)(struct drm_plane *plane,
> + int width, int height));
>
> #endif
> diff --git a/include/uapi/drm/drm_mode.h b/include/uapi/drm/drm_mode.h
> index 46becedf5b2f..5a1de6bd80dd 100644
> --- a/include/uapi/drm/drm_mode.h
> +++ b/include/uapi/drm/drm_mode.h
> @@ -849,6 +849,35 @@ struct drm_color_lut {
> __u16 reserved;
> };
>
> +/**
> + * struct drm_plane_size_hint - Plane size hints
> + *
> + * Includes a 2D bitmap in row major order of one bit per plane
> + * size (WxH). The colums represent the possible plane widths as
> + * <min>,<power of two values between min-max>,<max>
> + * the rows do the same for plane heights. The minimums and
> + * maximums need not be power of two themselves. The bits
> + * are walked in lsb->msb order.
> + *
> + * Example:
> + * min_width = 33, min_height = 16
> + * max_width = 128, max_height = 127
> + * bitmap[0] = 0b100111011001
> + * 33 64 128
> + * 16 *
> + * 32 * *
> + * 64 * * *
> + * 127 *
> + *
> + * Indicating support for 33x16,33xx32,
> + * 64x32,64x64,128x64,128x127 sizes.
> + */
> +struct drm_plane_size_hint {
> + __u16 min_width, min_height;
> + __u16 max_width, max_height;
> + __u32 bitmap[];
> +};
Hi,
as a compositor developer, I believe I could make use of this somehow.
I would probably pose the optimization problem as "what dimensions
result in the smallest area" in a compositor, iterating over the
possible and allowed widths and checking the smallest possible and
allowed height.
If you think this is a good match to hardware capabilities, it's fine
by me. The power-of-two is a pretty fundamental built-in assumption and
I have no idea how good it is.
Thanks,
pq
More information about the dri-devel
mailing list