[RFC PATCH 0/3] drm/msm/a5xx: scale MX following the frequency changes

[Dmitry Baryshkov]

On 30/03/2023 14:06, Konrad Dybcio wrote:
> 
> 
> On 30.03.2023 00:24, Dmitry Baryshkov wrote:
>> Konrad brought up the topic of scaling the MX domain according to the
>> OPP changes. Here is my RFC for this functionality. I post it as an RFC
>> for two reasons:
>>
>> 1) I'm not sure that we should scale MX if we are not scaling main
>> voltage following the CPR3
> It should be ok, however..
>>
> [...]
> 
>> Dmitry Baryshkov (3):
>>    dt-bindings: display/msm/gpu: allow specifying MX domain A5xx
>>    drm/msm/a5xx: scale MX domain following the frequncy changes
> This is a stopgap solution, CPR is a child of MX.

Not so sure here. Vendor kernel scales voltages and MX levels 
separately. Moreover, please correct me if I'm wrong here, the kernel 
doesn't scale VDD_GFX directly. It programs GPMU's voltage table and 
then GPMU handles voltage scaling according to performance levels being 
set. MX is handled in parallel to switching GPMU's level.

I have implemented this voltage scaling locally, just need to run more 
tests before posting (and unfortunately it depends either on CPR3+GFX or 
on programming the voltages manually).

> 
> Konrad
>>    arm64: dts: qcom: specify power domains for the GPU
>>
>>   .../devicetree/bindings/display/msm/gpu.yaml  |  9 +++-
>>   arch/arm64/boot/dts/qcom/msm8996.dtsi         | 14 ++++-
>>   drivers/gpu/drm/msm/adreno/a5xx_gpu.c         | 52 +++++++++++++++++++
>>   drivers/gpu/drm/msm/adreno/a5xx_gpu.h         |  3 ++
>>   4 files changed, 76 insertions(+), 2 deletions(-)
>>

-- 
With best wishes
Dmitry