[PATCH RFC 5/5] drm/msm/dsi: Use MSM and DRM DSC helper methods
Jessica Zhang
quic_jesszhan at quicinc.com
Fri Mar 31 01:12:56 UTC 2023
On 3/30/2023 5:16 PM, Dmitry Baryshkov wrote:
> On Fri, 31 Mar 2023 at 03:07, Jessica Zhang <quic_jesszhan at quicinc.com> wrote:
>>
>>
>>
>> On 3/30/2023 4:14 PM, Dmitry Baryshkov wrote:
>>> On 31/03/2023 01:49, Jessica Zhang wrote:
>>>>
>>>>
>>>> On 3/29/2023 4:48 PM, Dmitry Baryshkov wrote:
>>>>> On 30/03/2023 02:18, Jessica Zhang wrote:
>>>>>> Use MSM and DRM DSC helper methods.
>>>>>>
>>>>>> Signed-off-by: Jessica Zhang <quic_jesszhan at quicinc.com>
>>>>>> ---
>>>>>> drivers/gpu/drm/msm/dsi/dsi_host.c | 18 ++++++++++++------
>>>>>> 1 file changed, 12 insertions(+), 6 deletions(-)
>>>>>>
>>>>>> diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c
>>>>>> b/drivers/gpu/drm/msm/dsi/dsi_host.c
>>>>>> index 74d38f90398a..7419fe58a941 100644
>>>>>> --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
>>>>>> +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
>>>>>> @@ -31,6 +31,7 @@
>>>>>> #include "msm_kms.h"
>>>>>> #include "msm_gem.h"
>>>>>> #include "phy/dsi_phy.h"
>>>>>> +#include "disp/msm_dsc_helper.h"
>>>>>> #define DSI_RESET_TOGGLE_DELAY_MS 20
>>>>>> @@ -841,14 +842,14 @@ static void dsi_update_dsc_timing(struct
>>>>>> msm_dsi_host *msm_host, bool is_cmd_mod
>>>>>> {
>>>>>> struct drm_dsc_config *dsc = msm_host->dsc;
>>>>>> u32 reg, reg_ctrl, reg_ctrl2;
>>>>>> - u32 slice_per_intf, total_bytes_per_intf;
>>>>>> + u32 slice_per_intf;
>>>>>> u32 pkt_per_line;
>>>>>> u32 eol_byte_num;
>>>>>> /* first calculate dsc parameters and then program
>>>>>> * compress mode registers
>>>>>> */
>>>>>> - slice_per_intf = DIV_ROUND_UP(hdisplay, dsc->slice_width);
>>>>>> + slice_per_intf = msm_dsc_get_slice_per_intf(dsc, hdisplay);
>>>>>
>>>>> This looks good
>>>>>
>>>>>> /*
>>>>>> * If slice_count is greater than slice_per_intf
>>>>>> @@ -858,10 +859,10 @@ static void dsi_update_dsc_timing(struct
>>>>>> msm_dsi_host *msm_host, bool is_cmd_mod
>>>>>> if (dsc->slice_count > slice_per_intf)
>>>>>> dsc->slice_count = 1;
>>>>>> - total_bytes_per_intf = dsc->slice_chunk_size * slice_per_intf;
>>>>>> + eol_byte_num = msm_dsc_get_eol_byte_num(msm_host->dsc, hdisplay,
>>>>>> + dsi_get_bpp(msm_host->format));
>>>>>> - eol_byte_num = total_bytes_per_intf % 3;
>>>>>> - pkt_per_line = slice_per_intf / dsc->slice_count;
>>>>>> + pkt_per_line = slice_per_intf / MSM_DSC_SLICE_PER_PKT;
>>>>>
>>>>> And for these values the result is definitely changed. Separate patch
>>>>> & description please. Just in case, "values per downstream kernel" is
>>>>> not a proper description for such changes.
>>>>
>>>> Hi Dmitry,
>>>>
>>>> Sure, I can put this into a separate patch.
>>>>
>>>> The reason this was changed from slice_count to SLICE_PER_PKT was
>>>> because slice count and slice per packet aren't always equivalent.
>>>> There can be cases where panel configures DSC to have multiple soft
>>>> slices per interface, but the panel only specifies 1 slice per packet.
>>>
>>> Please put this nice description into the commit message. It is exactly
>>> what I was looking for!
>>>
>>> BTW: Do you expect to change MSM_DSC_SLICE_PER_PKT later or it will stay
>>> at "1"? If so, it might be easier to drop it and instead add a comment.
>>
>> MSM_DSC_SLICE_PER_PKT is the default value for panels that don't specify
>> a slice_per_pkt value. (Now that I think about it, might be better to
>> call it MSM_DSC_DEFAULT_SLICE_PER_PKT instead...)
>
> Note, there is no slice_per_pkt in drm_dsc_config, so we must come up
> with another way to pass this data from the panel or to deduce the
> value in our driver.
AFAIK we aren't developing on any panels that have a non-default
slice-per-packet count right now, so I'm not sure if it would be worth
the effort to add this if there's no panel we can validate it on.
FWIW, downstream reads slice_per_pkt from a custom DT entry [1]
[1]
https://android.googlesource.com/kernel/msm-extra/devicetree/+/refs/heads/android-msm-bramble-4.19-android11-qpr1/qcom/dsi-panel-r66451-dsc-fhd-plus-120hz-cmd.dtsi#115
>
>>
>> I don't expect it to change in the future, but it's a little more
>> readable than just dividing by 1 IMO. If you prefer dropping the macro
>> and adding a comment, I'm also okay with that.
>
> There is no need to divide by 1, the value doesn't change. So I'd
> probably prefer something like:
>
> /* Default to 1 slice per packet */
> if (panel_slice_per_pkt)
> pkt_per_line = slice_per_intf / panel_slice_per_pkt;
> else
> pkt_per_line = slice_per_intf;
>
> Or:
>
> /* Default to 1 slice per packet */
> slice_per_pkt = 1;
> if (panel_slice_per_pkt)
> slice_per_pkt = panel_slice_per_pkt;
> pkt_per_line = slice_per_intf / slice_per_pkt;
Acked.
>
> BTW: could you possibly change 'intf' to 'line' to v2? It seems there
> is a mixture of them through the code. If there is a difference
> between intf and line which is not yet posted, it's fine to keep the
> current code. WDYT?
AFAIK 'line' and 'intf' seem to be equivalent. I'll make this change
once I confirm this.
Thanks,
Jessica Zhang
>
>>
>> Thanks,
>>
>> Jessica Zhang
>>
>>>
>>> Regarding eol_byte_num, probably the best explanation would be that is
>>> is a size of a padding rather than a size of a trailer bytes in a line
>>> (and thus original calculation was incorrect).
>>>
>>>>
>>>>>
>>>>>> if (is_cmd_mode) /* packet data type */
>>>>>> reg =
>>>>>> DSI_COMMAND_COMPRESSION_MODE_CTRL_STREAM0_DATATYPE(MIPI_DSI_DCS_LONG_WRITE);
>>>>>> @@ -911,6 +912,11 @@ static void dsi_timing_setup(struct
>>>>>> msm_dsi_host *msm_host, bool is_bonded_dsi)
>>>>>> DBG("");
>>>>>> + if (msm_host->mode_flags & MIPI_DSI_MODE_VIDEO)
>>>>>> + /* Default widebus_en to false for now. */
>>>>>> + hdisplay = msm_dsc_get_pclk_per_line(msm_host->dsc,
>>>>>> mode->hdisplay,
>>>>>> + dsi_get_bpp(msm_host->format));
>>>>>> +
>>>>>
>>>>> This is definitely something new and thus should probably go into a
>>>>> separate patch and be described. Also I'm not sure how does that
>>>>> interact with the hdisplay-related calculations below, under the
>>>>> if(dsc) clause.
>>>>
>>>> After double-checking the math here, I think this part of the change
>>>> is actually wrong. pclk_per_line is essentially doing hdisplay / 3,
>>>> which is a repeat of what's being done in the `if (dsc)` block.
>>>>
>>>> Will replace `hdisplay /= 3` with the pclk_per_line calculation.
>>>
>>> Thanks!
>>>
>>>>
>>>> Thanks,
>>>>
>>>> Jessica Zhang
>>>>
>>>>>
>>>>>> /*
>>>>>> * For bonded DSI mode, the current DRM mode has
>>>>>> * the complete width of the panel. Since, the complete
>>>>>> @@ -1759,7 +1765,7 @@ static int dsi_populate_dsc_params(struct
>>>>>> msm_dsi_host *msm_host, struct drm_dsc
>>>>>> return ret;
>>>>>> }
>>>>>> - dsc->initial_scale_value = 32;
>>>>>> + dsc->initial_scale_value =
>>>>>> drm_dsc_calculate_initial_scale_value(dsc);
>>>>>
>>>>> This is fine, we only support 8bpp where these values match.
>>>>>
>>>>>> dsc->line_buf_depth = dsc->bits_per_component + 1;
>>>>>> return drm_dsc_compute_rc_parameters(dsc);
>>>>>>
>>>>>
>>>>> --
>>>>> With best wishes
>>>>> Dmitry
>>>>>
>>>
>>> --
>>> With best wishes
>>> Dmitry
>>>
>
>
>
> --
> With best wishes
> Dmitry
More information about the dri-devel
mailing list