[PATCH v3 5/5] arm64: dts: qcom: sm8250: Add GPU speedbin support

Konrad Dybcio konrad.dybcio at linaro.org
Fri Mar 31 01:14:53 UTC 2023


SM8250 has (at least) four GPU speed bins. With the support added on the
driver side, wire up bin detection in the DTS to restrict lower-quality
SKUs from running at frequencies they were not validated at.

Tested-by: Marijn Suijten <marijn.suijten at somainline.org> # On Sony Xperia 5 II (speed bin 0x7)
Reviewed-by: Marijn Suijten <marijn.suijten at somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio at linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 23 ++++++++++++++++++++++-
 1 file changed, 22 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 7b78761f2041..65e6fcff2d6c 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -962,6 +962,18 @@ ipcc: mailbox at 408000 {
 			#mbox-cells = <2>;
 		};
 
+		qfprom: efuse at 784000 {
+			compatible = "qcom,sm8250-qfprom", "qcom,qfprom";
+			reg = <0 0x00784000 0 0x8ff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			gpu_speed_bin: gpu_speed_bin at 19b {
+				reg = <0x19b 0x1>;
+				bits = <5 3>;
+			};
+		};
+
 		rng: rng at 793000 {
 			compatible = "qcom,prng-ee";
 			reg = <0 0x00793000 0 0x1000>;
@@ -2559,49 +2571,58 @@ gpu: gpu at 3d00000 {
 
 			qcom,gmu = <&gmu>;
 
+			nvmem-cells = <&gpu_speed_bin>;
+			nvmem-cell-names = "speed_bin";
+
 			status = "disabled";
 
 			zap-shader {
 				memory-region = <&gpu_mem>;
 			};
 
-			/* note: downstream checks gpu binning for 670 Mhz */
 			gpu_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
 				opp-670000000 {
 					opp-hz = /bits/ 64 <670000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					opp-supported-hw = <0xa>;
 				};
 
 				opp-587000000 {
 					opp-hz = /bits/ 64 <587000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					opp-supported-hw = <0xb>;
 				};
 
 				opp-525000000 {
 					opp-hz = /bits/ 64 <525000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+					opp-supported-hw = <0xf>;
 				};
 
 				opp-490000000 {
 					opp-hz = /bits/ 64 <490000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					opp-supported-hw = <0xf>;
 				};
 
 				opp-441600000 {
 					opp-hz = /bits/ 64 <441600000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+					opp-supported-hw = <0xf>;
 				};
 
 				opp-400000000 {
 					opp-hz = /bits/ 64 <400000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					opp-supported-hw = <0xf>;
 				};
 
 				opp-305000000 {
 					opp-hz = /bits/ 64 <305000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					opp-supported-hw = <0xf>;
 				};
 			};
 		};

-- 
2.40.0



More information about the dri-devel mailing list