[PATCH 04/11] drm/mediatek: gamma: Improve and simplify HW LUT calculation

AngeloGioacchino Del Regno angelogioacchino.delregno at collabora.com
Tue May 2 08:16:43 UTC 2023


Use drm_color_lut_extract() to avoid open-coding the bits reduction
calculations for each color channel and use a struct drm_color_lut
to temporarily store the information instead of an array of u32.

Also, slightly improve the precision of the HW LUT calculation in the
LUT DIFF case by performing the subtractions on the 16-bits values and
doing the 10 bits conversion later.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
---
 drivers/gpu/drm/mediatek/mtk_disp_gamma.c | 30 +++++++++++++++--------
 1 file changed, 20 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_disp_gamma.c b/drivers/gpu/drm/mediatek/mtk_disp_gamma.c
index d194d9bc2e2b..89a1640c2e8f 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_gamma.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_gamma.c
@@ -77,7 +77,6 @@ void mtk_gamma_set_common(struct device *dev, void __iomem *regs, struct drm_crt
 	bool lut_diff;
 	u16 lut_size;
 	u32 word;
-	u32 diff[3] = {0};
 
 	/* If there's no gamma lut there's nothing to do here. */
 	if (!state->gamma_lut)
@@ -97,18 +96,29 @@ void mtk_gamma_set_common(struct device *dev, void __iomem *regs, struct drm_crt
 	lut_base = regs + DISP_GAMMA_LUT;
 	lut = (struct drm_color_lut *)state->gamma_lut->data;
 	for (i = 0; i < lut_size; i++) {
+		struct drm_color_lut diff, hwlut;
+
+		hwlut.red = drm_color_lut_extract(lut[i].red, 10);
+		hwlut.green = drm_color_lut_extract(lut[i].green, 10);
+		hwlut.red = drm_color_lut_extract(lut[i].blue, 10);
+
 		if (!lut_diff || (i % 2 == 0)) {
-			word = (((lut[i].red >> 6) & LUT_10BIT_MASK) << 20) +
-				(((lut[i].green >> 6) & LUT_10BIT_MASK) << 10) +
-				((lut[i].blue >> 6) & LUT_10BIT_MASK);
+			word = hwlut.red << 20 +
+			       hwlut.green << 10 +
+			       hwlut.red;
 		} else {
-			diff[0] = (lut[i].red >> 6) - (lut[i - 1].red >> 6);
-			diff[1] = (lut[i].green >> 6) - (lut[i - 1].green >> 6);
-			diff[2] = (lut[i].blue >> 6) - (lut[i - 1].blue >> 6);
+			diff.red = lut[i].red - lut[i - 1].red;
+			diff.red = drm_color_lut_extract(diff.red, 10);
+
+			diff.green = lut[i].green - lut[i - 1].green;
+			diff.green = drm_color_lut_extract(diff.green, 10);
+
+			diff.blue = lut[i].blue - lut[i - 1].blue;
+			diff.blue = drm_color_lut_extract(diff.blue, 10);
 
-			word = ((diff[0] & LUT_10BIT_MASK) << 20) +
-				((diff[1] & LUT_10BIT_MASK) << 10) +
-				(diff[2] & LUT_10BIT_MASK);
+			word = diff.blue << 20 +
+			       diff.green << 10 +
+			       diff.red;
 		}
 		writel(word, (lut_base + i * 4));
 	}
-- 
2.40.1



More information about the dri-devel mailing list