[PATCH 3/4] ARM/mmc: Convert old mmci-omap to GPIO descriptors
Ulf Hansson
ulf.hansson at linaro.org
Tue May 2 14:25:39 UTC 2023
On Sun, 30 Apr 2023 at 11:22, Linus Walleij <linus.walleij at linaro.org> wrote:
>
> A recent change to the OMAP driver making it use a dynamic GPIO
> base created problems with some old OMAP1 board files, among
> them Nokia 770, SX1 and also the OMAP2 Nokia n8x0.
>
> Fix up all instances of GPIOs being used for the MMC driver
> by pushing the handling of power, slot selection and MMC
> "cover" into the driver as optional GPIOs.
>
> This is maybe not the most perfect solution as the MMC
> framework have some central handlers for some of the
> stuff, but it at least makes the situtation better and
> solves the immediate issue.
>
> Fixes: 92bf78b33b0b ("gpio: omap: use dynamic allocation of base")
> Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
This looks like it's best funneled through the soc maintainer's tree(s), right?
Acked-by: Ulf Hansson <ulf.hansson at linaro.org>
Kind regards
Uffe
> ---
> arch/arm/mach-omap1/board-nokia770.c | 43 ++++++-----------
> arch/arm/mach-omap1/board-sx1-mmc.c | 1 -
> arch/arm/mach-omap2/board-n8x0.c | 85 +++++++++++-----------------------
> drivers/mmc/host/omap.c | 46 +++++++++++++++++-
> include/linux/platform_data/mmc-omap.h | 2 -
> 5 files changed, 83 insertions(+), 94 deletions(-)
>
> diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
> index 509afcd42823..53a4a44d5f4a 100644
> --- a/arch/arm/mach-omap1/board-nokia770.c
> +++ b/arch/arm/mach-omap1/board-nokia770.c
> @@ -162,27 +162,23 @@ static struct omap_usb_config nokia770_usb_config __initdata = {
>
> #if IS_ENABLED(CONFIG_MMC_OMAP)
>
> -#define NOKIA770_GPIO_MMC_POWER 41
> -#define NOKIA770_GPIO_MMC_SWITCH 23
> -
> -static int nokia770_mmc_set_power(struct device *dev, int slot, int power_on,
> - int vdd)
> -{
> - gpio_set_value(NOKIA770_GPIO_MMC_POWER, power_on);
> - return 0;
> -}
> -
> -static int nokia770_mmc_get_cover_state(struct device *dev, int slot)
> -{
> - return gpio_get_value(NOKIA770_GPIO_MMC_SWITCH);
> -}
> +static struct gpiod_lookup_table nokia770_mmc_gpio_table = {
> + .dev_id = "mmci-omap",
> + .table = {
> + /* Slot index 0, VSD power, GPIO 41 */
> + GPIO_LOOKUP_IDX("gpio-32-47", 9,
> + "vsd", 0, GPIO_ACTIVE_HIGH),
> + /* Slot index 0, switch, GPIO 23 */
> + GPIO_LOOKUP_IDX("gpio-16-31", 7,
> + "cover", 0, GPIO_ACTIVE_HIGH),
> + { }
> + },
> +};
>
> static struct omap_mmc_platform_data nokia770_mmc2_data = {
> .nr_slots = 1,
> .max_freq = 12000000,
> .slots[0] = {
> - .set_power = nokia770_mmc_set_power,
> - .get_cover_state = nokia770_mmc_get_cover_state,
> .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
> .name = "mmcblk",
> },
> @@ -192,20 +188,7 @@ static struct omap_mmc_platform_data *nokia770_mmc_data[OMAP16XX_NR_MMC];
>
> static void __init nokia770_mmc_init(void)
> {
> - int ret;
> -
> - ret = gpio_request(NOKIA770_GPIO_MMC_POWER, "MMC power");
> - if (ret < 0)
> - return;
> - gpio_direction_output(NOKIA770_GPIO_MMC_POWER, 0);
> -
> - ret = gpio_request(NOKIA770_GPIO_MMC_SWITCH, "MMC cover");
> - if (ret < 0) {
> - gpio_free(NOKIA770_GPIO_MMC_POWER);
> - return;
> - }
> - gpio_direction_input(NOKIA770_GPIO_MMC_SWITCH);
> -
> + gpiod_add_lookup_table(&nokia770_mmc_gpio_table);
> /* Only the second MMC controller is used */
> nokia770_mmc_data[1] = &nokia770_mmc2_data;
> omap1_init_mmc(nokia770_mmc_data, OMAP16XX_NR_MMC);
> diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c
> index f1c160924dfe..f183a8448a7b 100644
> --- a/arch/arm/mach-omap1/board-sx1-mmc.c
> +++ b/arch/arm/mach-omap1/board-sx1-mmc.c
> @@ -9,7 +9,6 @@
> * Copyright (C) 2007 Instituto Nokia de Tecnologia - INdT
> */
>
> -#include <linux/gpio.h>
> #include <linux/platform_device.h>
>
> #include "hardware.h"
> diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
> index 3353b0a923d9..baa2f0341aed 100644
> --- a/arch/arm/mach-omap2/board-n8x0.c
> +++ b/arch/arm/mach-omap2/board-n8x0.c
> @@ -11,6 +11,7 @@
> #include <linux/clk.h>
> #include <linux/delay.h>
> #include <linux/gpio.h>
> +#include <linux/gpio/machine.h>
> #include <linux/init.h>
> #include <linux/io.h>
> #include <linux/irq.h>
> @@ -170,22 +171,32 @@ static struct spi_board_info n800_spi_board_info[] __initdata = {
> * GPIO23 and GPIO9 slot 2 EMMC on N810
> *
> */
> -#define N8X0_SLOT_SWITCH_GPIO 96
> -#define N810_EMMC_VSD_GPIO 23
> -#define N810_EMMC_VIO_GPIO 9
> -
> static int slot1_cover_open;
> static int slot2_cover_open;
> static struct device *mmc_device;
>
> -static int n8x0_mmc_switch_slot(struct device *dev, int slot)
> -{
> -#ifdef CONFIG_MMC_DEBUG
> - dev_dbg(dev, "Choose slot %d\n", slot + 1);
> -#endif
> - gpio_set_value(N8X0_SLOT_SWITCH_GPIO, slot);
> - return 0;
> -}
> +static struct gpiod_lookup_table nokia8xx_mmc_gpio_table = {
> + .dev_id = "mmci-omap",
> + .table = {
> + /* Slot switch, GPIO 96 */
> + GPIO_LOOKUP("gpio-80-111", 16,
> + "switch", GPIO_ACTIVE_HIGH),
> + { }
> + },
> +};
> +
> +static struct gpiod_lookup_table nokia810_mmc_gpio_table = {
> + .dev_id = "mmci-omap",
> + .table = {
> + /* Slot index 1, VSD power, GPIO 23 */
> + GPIO_LOOKUP_IDX("gpio-16-31", 7,
> + "vsd", 1, GPIO_ACTIVE_HIGH),
> + /* Slot index 1, VIO power, GPIO 9 */
> + GPIO_LOOKUP_IDX("gpio-0-15", 9,
> + "vsd", 1, GPIO_ACTIVE_HIGH),
> + { }
> + },
> +};
>
> static int n8x0_mmc_set_power_menelaus(struct device *dev, int slot,
> int power_on, int vdd)
> @@ -256,31 +267,13 @@ static int n8x0_mmc_set_power_menelaus(struct device *dev, int slot,
> return 0;
> }
>
> -static void n810_set_power_emmc(struct device *dev,
> - int power_on)
> -{
> - dev_dbg(dev, "Set EMMC power %s\n", power_on ? "on" : "off");
> -
> - if (power_on) {
> - gpio_set_value(N810_EMMC_VSD_GPIO, 1);
> - msleep(1);
> - gpio_set_value(N810_EMMC_VIO_GPIO, 1);
> - msleep(1);
> - } else {
> - gpio_set_value(N810_EMMC_VIO_GPIO, 0);
> - msleep(50);
> - gpio_set_value(N810_EMMC_VSD_GPIO, 0);
> - msleep(50);
> - }
> -}
> -
> static int n8x0_mmc_set_power(struct device *dev, int slot, int power_on,
> int vdd)
> {
> if (board_is_n800() || slot == 0)
> return n8x0_mmc_set_power_menelaus(dev, slot, power_on, vdd);
>
> - n810_set_power_emmc(dev, power_on);
> + /* The n810 power will be handled by GPIO code in the driver */
>
> return 0;
> }
> @@ -418,13 +411,6 @@ static void n8x0_mmc_shutdown(struct device *dev)
> static void n8x0_mmc_cleanup(struct device *dev)
> {
> menelaus_unregister_mmc_callback();
> -
> - gpio_free(N8X0_SLOT_SWITCH_GPIO);
> -
> - if (board_is_n810()) {
> - gpio_free(N810_EMMC_VSD_GPIO);
> - gpio_free(N810_EMMC_VIO_GPIO);
> - }
> }
>
> /*
> @@ -433,7 +419,6 @@ static void n8x0_mmc_cleanup(struct device *dev)
> */
> static struct omap_mmc_platform_data mmc1_data = {
> .nr_slots = 0,
> - .switch_slot = n8x0_mmc_switch_slot,
> .init = n8x0_mmc_late_init,
> .cleanup = n8x0_mmc_cleanup,
> .shutdown = n8x0_mmc_shutdown,
> @@ -463,14 +448,9 @@ static struct omap_mmc_platform_data mmc1_data = {
>
> static struct omap_mmc_platform_data *mmc_data[OMAP24XX_NR_MMC];
>
> -static struct gpio n810_emmc_gpios[] __initdata = {
> - { N810_EMMC_VSD_GPIO, GPIOF_OUT_INIT_LOW, "MMC slot 2 Vddf" },
> - { N810_EMMC_VIO_GPIO, GPIOF_OUT_INIT_LOW, "MMC slot 2 Vdd" },
> -};
> -
> static void __init n8x0_mmc_init(void)
> {
> - int err;
> + gpiod_add_lookup_table(&nokia8xx_mmc_gpio_table);
>
> if (board_is_n810()) {
> mmc1_data.slots[0].name = "external";
> @@ -483,20 +463,7 @@ static void __init n8x0_mmc_init(void)
> */
> mmc1_data.slots[1].name = "internal";
> mmc1_data.slots[1].ban_openended = 1;
> - }
> -
> - err = gpio_request_one(N8X0_SLOT_SWITCH_GPIO, GPIOF_OUT_INIT_LOW,
> - "MMC slot switch");
> - if (err)
> - return;
> -
> - if (board_is_n810()) {
> - err = gpio_request_array(n810_emmc_gpios,
> - ARRAY_SIZE(n810_emmc_gpios));
> - if (err) {
> - gpio_free(N8X0_SLOT_SWITCH_GPIO);
> - return;
> - }
> + gpiod_add_lookup_table(&nokia810_mmc_gpio_table);
> }
>
> mmc1_data.nr_slots = 2;
> diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
> index ce78edfb402b..a14af21f12da 100644
> --- a/drivers/mmc/host/omap.c
> +++ b/drivers/mmc/host/omap.c
> @@ -26,6 +26,7 @@
> #include <linux/clk.h>
> #include <linux/scatterlist.h>
> #include <linux/slab.h>
> +#include <linux/gpio/consumer.h>
> #include <linux/platform_data/mmc-omap.h>
>
>
> @@ -111,6 +112,9 @@ struct mmc_omap_slot {
> struct mmc_request *mrq;
> struct mmc_omap_host *host;
> struct mmc_host *mmc;
> + struct gpio_desc *vsd;
> + struct gpio_desc *vio;
> + struct gpio_desc *cover;
> struct omap_mmc_slot_data *pdata;
> };
>
> @@ -133,6 +137,7 @@ struct mmc_omap_host {
> int irq;
> unsigned char bus_mode;
> unsigned int reg_shift;
> + struct gpio_desc *slot_switch;
>
> struct work_struct cmd_abort_work;
> unsigned abort:1;
> @@ -216,8 +221,13 @@ static void mmc_omap_select_slot(struct mmc_omap_slot *slot, int claimed)
>
> if (host->current_slot != slot) {
> OMAP_MMC_WRITE(host, CON, slot->saved_con & 0xFC00);
> - if (host->pdata->switch_slot != NULL)
> - host->pdata->switch_slot(mmc_dev(slot->mmc), slot->id);
> + if (host->slot_switch)
> + /*
> + * With two slots and a simple GPIO switch, setting
> + * the GPIO to 0 selects slot ID 0, setting it to 1
> + * selects slot ID 1.
> + */
> + gpiod_set_value(host->slot_switch, slot->id);
> host->current_slot = slot;
> }
>
> @@ -297,6 +307,9 @@ static void mmc_omap_release_slot(struct mmc_omap_slot *slot, int clk_enabled)
> static inline
> int mmc_omap_cover_is_open(struct mmc_omap_slot *slot)
> {
> + /* If we have a GPIO then use that */
> + if (slot->cover)
> + return gpiod_get_value(slot->cover);
> if (slot->pdata->get_cover_state)
> return slot->pdata->get_cover_state(mmc_dev(slot->mmc),
> slot->id);
> @@ -1106,6 +1119,11 @@ static void mmc_omap_set_power(struct mmc_omap_slot *slot, int power_on,
>
> host = slot->host;
>
> + if (slot->vsd)
> + gpiod_set_value(slot->vsd, power_on);
> + if (slot->vio)
> + gpiod_set_value(slot->vio, power_on);
> +
> if (slot->pdata->set_power != NULL)
> slot->pdata->set_power(mmc_dev(slot->mmc), slot->id, power_on,
> vdd);
> @@ -1240,6 +1258,23 @@ static int mmc_omap_new_slot(struct mmc_omap_host *host, int id)
> slot->power_mode = MMC_POWER_UNDEFINED;
> slot->pdata = &host->pdata->slots[id];
>
> + /* Check for some optional GPIO controls */
> + slot->vsd = gpiod_get_index_optional(host->dev, "vsd",
> + id, GPIOD_OUT_LOW);
> + if (IS_ERR(slot->vsd))
> + return dev_err_probe(host->dev, PTR_ERR(slot->vsd),
> + "error looking up VSD GPIO\n");
> + slot->vio = gpiod_get_index_optional(host->dev, "vio",
> + id, GPIOD_OUT_LOW);
> + if (IS_ERR(slot->vio))
> + return dev_err_probe(host->dev, PTR_ERR(slot->vio),
> + "error looking up VIO GPIO\n");
> + slot->cover = gpiod_get_index_optional(host->dev, "cover",
> + id, GPIOD_IN);
> + if (IS_ERR(slot->cover))
> + return dev_err_probe(host->dev, PTR_ERR(slot->cover),
> + "error looking up cover switch GPIO\n");
> +
> host->slots[id] = slot;
>
> mmc->caps = 0;
> @@ -1349,6 +1384,13 @@ static int mmc_omap_probe(struct platform_device *pdev)
> if (IS_ERR(host->virt_base))
> return PTR_ERR(host->virt_base);
>
> + host->slot_switch = gpiod_get_optional(host->dev, "switch",
> + GPIOD_OUT_LOW);
> + if (IS_ERR(host->slot_switch))
> + return dev_err_probe(host->dev, PTR_ERR(host->slot_switch),
> + "error looking up slot switch GPIO\n");
> +
> +
> INIT_WORK(&host->slot_release_work, mmc_omap_slot_release_work);
> INIT_WORK(&host->send_stop_work, mmc_omap_send_stop_work);
>
> diff --git a/include/linux/platform_data/mmc-omap.h b/include/linux/platform_data/mmc-omap.h
> index 91051e9907f3..054d0c3c5ec5 100644
> --- a/include/linux/platform_data/mmc-omap.h
> +++ b/include/linux/platform_data/mmc-omap.h
> @@ -20,8 +20,6 @@ struct omap_mmc_platform_data {
> * maximum frequency on the MMC bus */
> unsigned int max_freq;
>
> - /* switch the bus to a new slot */
> - int (*switch_slot)(struct device *dev, int slot);
> /* initialize board-specific MMC functionality, can be NULL if
> * not supported */
> int (*init)(struct device *dev);
>
> --
> 2.34.1
>
More information about the dri-devel
mailing list