[PATCH v3 2/7] drm/msm/dpu: add DPU_PINGPONG_DSC feature bit
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Tue May 2 21:19:47 UTC 2023
On 03/05/2023 00:02, Kuogee Hsieh wrote:
> Legacy DPU requires PP block to be involved during DSC setting up.
> This patch adds DDPU_PINGPONG_DSC feature bit to indicate that both
DPU_PINGPONG_DSC
> dpu_hw_pp_setup_dsc() and dpu_hw_pp_dsc_enable() pingpong ops
> functions are required to complete DSC data path set up and start
> DSC engine.
Nit: as these ops were already present, I'd say that the lack of the
flag means that these operations are not supported and must not be
called for DSC setup/teardown.
Nevertheless:
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
>
> Reported-by : Marijn Suijten <marijn.suijten at somainline.org>
> Signed-off-by: Kuogee Hsieh <quic_khsieh at quicinc.com>
> ---
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 2 ++
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c | 9 ++++++---
> 2 files changed, 8 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> index 71584cd..c07a6b6 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> @@ -144,6 +144,7 @@ enum {
> * @DPU_PINGPONG_SPLIT PP block supports split fifo
> * @DPU_PINGPONG_SLAVE PP block is a suitable slave for split fifo
> * @DPU_PINGPONG_DITHER, Dither blocks
> + * @DPU_PINGPONG_DSC, PP ops functions required for DSC
> * @DPU_PINGPONG_MAX
> */
> enum {
> @@ -152,6 +153,7 @@ enum {
> DPU_PINGPONG_SPLIT,
> DPU_PINGPONG_SLAVE,
> DPU_PINGPONG_DITHER,
> + DPU_PINGPONG_DSC,
> DPU_PINGPONG_MAX
> };
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c
> index 3822e06..f255a04 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c
> @@ -264,9 +264,12 @@ static void _setup_pingpong_ops(struct dpu_hw_pingpong *c,
> c->ops.get_autorefresh = dpu_hw_pp_get_autorefresh_config;
> c->ops.poll_timeout_wr_ptr = dpu_hw_pp_poll_timeout_wr_ptr;
> c->ops.get_line_count = dpu_hw_pp_get_line_count;
> - c->ops.setup_dsc = dpu_hw_pp_setup_dsc;
> - c->ops.enable_dsc = dpu_hw_pp_dsc_enable;
> - c->ops.disable_dsc = dpu_hw_pp_dsc_disable;
> +
> + if (features & BIT(DPU_PINGPONG_DSC)) {
> + c->ops.setup_dsc = dpu_hw_pp_setup_dsc;
> + c->ops.enable_dsc = dpu_hw_pp_dsc_enable;
> + c->ops.disable_dsc = dpu_hw_pp_dsc_disable;
> + }
>
> if (test_bit(DPU_PINGPONG_DITHER, &features))
> c->ops.setup_dither = dpu_hw_pp_setup_dither;
--
With best wishes
Dmitry
More information about the dri-devel
mailing list