[PATCH 1/4] drm/msm/dsi: Adjust pclk rate for compression

Dmitry Baryshkov dmitry.baryshkov at linaro.org
Wed May 3 08:33:16 UTC 2023


On 03/05/2023 04:19, Jessica Zhang wrote:
> Divide the pclk rate by the compression ratio when DSC is enabled
> 
> Signed-off-by: Jessica Zhang <quic_jesszhan at quicinc.com>
> ---
>   drivers/gpu/drm/msm/dsi/dsi_host.c | 14 ++++++++++----
>   1 file changed, 10 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
> index 43a5ec33eee8..35c69dbe5f6f 100644
> --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
> +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
> @@ -561,7 +561,8 @@ void dsi_link_clk_disable_v2(struct msm_dsi_host *msm_host)
>   	clk_disable_unprepare(msm_host->byte_clk);
>   }
>   
> -static unsigned long dsi_get_pclk_rate(const struct drm_display_mode *mode, bool is_bonded_dsi)
> +static unsigned long dsi_get_pclk_rate(const struct drm_display_mode *mode,
> +		struct drm_dsc_config *dsc, bool is_bonded_dsi)
>   {
>   	unsigned long pclk_rate;
>   
> @@ -576,6 +577,11 @@ static unsigned long dsi_get_pclk_rate(const struct drm_display_mode *mode, bool
>   	if (is_bonded_dsi)
>   		pclk_rate /= 2;
>   
> +	/* If DSC is enabled, divide pclk by compression ratio */
> +	if (dsc)
> +		pclk_rate = DIV_ROUND_UP(pclk_rate,
> +				dsc->bits_per_component * 3 / msm_dsc_get_bpp_int(dsc));
> +

Don't we loose precision here?
Would DIV_ROUND_UP(pclk_rate * bpp, dsc->bpc * 3) be better?

>   	return pclk_rate;
>   }
>   
> @@ -585,7 +591,7 @@ unsigned long dsi_byte_clk_get_rate(struct mipi_dsi_host *host, bool is_bonded_d
>   	struct msm_dsi_host *msm_host = to_msm_dsi_host(host);
>   	u8 lanes = msm_host->lanes;
>   	u32 bpp = dsi_get_bpp(msm_host->format);
> -	unsigned long pclk_rate = dsi_get_pclk_rate(mode, is_bonded_dsi);
> +	unsigned long pclk_rate = dsi_get_pclk_rate(mode, msm_host->dsc, is_bonded_dsi);
>   	u64 pclk_bpp = (u64)pclk_rate * bpp;
>   
>   	if (lanes == 0) {
> @@ -604,7 +610,7 @@ unsigned long dsi_byte_clk_get_rate(struct mipi_dsi_host *host, bool is_bonded_d
>   
>   static void dsi_calc_pclk(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
>   {
> -	msm_host->pixel_clk_rate = dsi_get_pclk_rate(msm_host->mode, is_bonded_dsi);
> +	msm_host->pixel_clk_rate = dsi_get_pclk_rate(msm_host->mode, msm_host->dsc, is_bonded_dsi);
>   	msm_host->byte_clk_rate = dsi_byte_clk_get_rate(&msm_host->base, is_bonded_dsi,
>   							msm_host->mode);
>   
> @@ -634,7 +640,7 @@ int dsi_calc_clk_rate_v2(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
>   
>   	dsi_calc_pclk(msm_host, is_bonded_dsi);
>   
> -	pclk_bpp = (u64)dsi_get_pclk_rate(msm_host->mode, is_bonded_dsi) * bpp;
> +	pclk_bpp = (u64)dsi_get_pclk_rate(msm_host->mode, msm_host->dsc, is_bonded_dsi) * bpp;
>   	do_div(pclk_bpp, 8);
>   	msm_host->src_clk_rate = pclk_bpp;
>   
> 

-- 
With best wishes
Dmitry



More information about the dri-devel mailing list