[PATCH V3 7/7] drm: bridge: samsung-dsim: Let blanking calcuation work in non-burst mode
Adam Ford
aford173 at gmail.com
Wed May 3 16:17:50 UTC 2023
On Wed, May 3, 2023 at 10:52 AM Frieder Schrempf
<frieder.schrempf at kontron.de> wrote:
>
> On 02.05.23 03:07, Adam Ford wrote:
> > The blanking calculation currently uses burst_clk_rate for calculating
> > the settings. Since it's possible to use this in non-burst mode, it's
> > possible that where won't be burst_clk_rate. Instead, cache the
>
> "possible that burst_clk_rate is 0"
>
> > clock rate configured from of samsung_dsim_set_pll and use it instead.
> >
> > Signed-off-by: Adam Ford <aford173 at gmail.com> Tested-by: Chen-Yu Tsai <wenst at chromium.org>
>
> Maybe this patch should be squashed into patch 6/7 as otherwise
> burst_clk_rate could be 0 here causing bisection issues?
I thought about squashing them and I went back and forth on that.
Since there are some other minor edits in this series, I can push a V4
with these squashed.
>
> Apart from that:
>
> Tested on Kontron BL i.MX8MM with SN65DSI84 and ADV7535 bridges.
>
Thank you for testing this series.
> Tested-by: Frieder Schrempf <frieder.schrempf at kontron.de>
> Reviewed-by: Frieder Schrempf <frieder.schrempf at kontron.de>
>
adam
> > ---
> > drivers/gpu/drm/bridge/samsung-dsim.c | 4 +++-
> > include/drm/bridge/samsung-dsim.h | 1 +
> > 2 files changed, 4 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/gpu/drm/bridge/samsung-dsim.c b/drivers/gpu/drm/bridge/samsung-dsim.c
> > index 53099461cdc2..1dc913db2cb3 100644
> > --- a/drivers/gpu/drm/bridge/samsung-dsim.c
> > +++ b/drivers/gpu/drm/bridge/samsung-dsim.c
> > @@ -652,6 +652,8 @@ static unsigned long samsung_dsim_set_pll(struct samsung_dsim *dsi,
> > reg = samsung_dsim_read(dsi, DSIM_STATUS_REG);
> > } while ((reg & DSIM_PLL_STABLE) == 0);
> >
> > + dsi->hs_clock = fout;
> > +
> > return fout;
> > }
> >
> > @@ -960,7 +962,7 @@ static void samsung_dsim_set_display_mode(struct samsung_dsim *dsi)
> > u32 reg;
> >
> > if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO) {
> > - int byte_clk_khz = dsi->burst_clk_rate / 1000 / 8;
> > + int byte_clk_khz = dsi->hs_clock / 1000 / 8;> int hfp = (m->hsync_start - m->hdisplay) * byte_clk_khz / m->clock;
> > int hbp = (m->htotal - m->hsync_end) * byte_clk_khz / m->clock;
> > int hsa = (m->hsync_end - m->hsync_start) * byte_clk_khz / m->clock;
> > diff --git a/include/drm/bridge/samsung-dsim.h b/include/drm/bridge/samsung-dsim.h
> > index 76ea8a1720cc..14176e6e9040 100644
> > --- a/include/drm/bridge/samsung-dsim.h
> > +++ b/include/drm/bridge/samsung-dsim.h
> > @@ -94,6 +94,7 @@ struct samsung_dsim {
> >
> > u32 pll_clk_rate;
> > u32 burst_clk_rate;
> > + u32 hs_clock;
> > u32 esc_clk_rate;
> > u32 lanes;
> > u32 mode_flags;
More information about the dri-devel
mailing list