[PATCH v4 4/7] drm/msm/dpu: add PINGPONG_NONE to disconnect DSC from PINGPONG

[Kuogee Hsieh]

During DSC setup, the crossbar mux need to be programmed to engage
DSC to specified PINGPONG. Hence during tear down, the crossbar mux
need to be reset to disengage DSC from PINGPONG. 0X0F is written to
reset crossbar mux. It is not relevant to hw_pp->idx.  This patch add
PINGPONG_NONE to serve as disable to reset crossbar mux.

Changes in v4:
-- more details to commit text

Signed-off-by: Kuogee Hsieh <quic_khsieh at quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 2 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.c  | 7 +++----
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h  | 1 -
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h | 3 ++-
 4 files changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index 1dc5dbe..d9ad334 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -1839,7 +1839,7 @@ static void dpu_encoder_dsc_pipe_cfg(struct dpu_hw_dsc *hw_dsc,
 		hw_pp->ops.setup_dsc(hw_pp);
 
 	if (hw_dsc->ops.dsc_bind_pingpong_blk)
-		hw_dsc->ops.dsc_bind_pingpong_blk(hw_dsc, true, hw_pp->idx);
+		hw_dsc->ops.dsc_bind_pingpong_blk(hw_dsc, hw_pp->idx);
 
 	if (hw_pp->ops.enable_dsc)
 		hw_pp->ops.enable_dsc(hw_pp);
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.c
index 4a6bbcc..3e68d47 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.c
@@ -157,7 +157,6 @@ static void dpu_hw_dsc_config_thresh(struct dpu_hw_dsc *hw_dsc,
 
 static void dpu_hw_dsc_bind_pingpong_blk(
 		struct dpu_hw_dsc *hw_dsc,
-		bool enable,
 		const enum dpu_pingpong pp)
 {
 	struct dpu_hw_blk_reg_map *c = &hw_dsc->hw;
@@ -166,13 +165,13 @@ static void dpu_hw_dsc_bind_pingpong_blk(
 
 	dsc_ctl_offset = DSC_CTL(hw_dsc->idx);
 
-	if (enable)
+	if (pp)
 		mux_cfg = (pp - PINGPONG_0) & 0x7;
 
 	DRM_DEBUG_KMS("%s dsc:%d %s pp:%d\n",
-			enable ? "Binding" : "Unbinding",
+			pp ? "Binding" : "Unbinding",
 			hw_dsc->idx - DSC_0,
-			enable ? "to" : "from",
+			pp ? "to" : "from",
 			pp - PINGPONG_0);
 
 	DPU_REG_WRITE(c, dsc_ctl_offset, mux_cfg);
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h
index 287ec5f..138080a 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h
@@ -44,7 +44,6 @@ struct dpu_hw_dsc_ops {
 				  struct drm_dsc_config *dsc);
 
 	void (*dsc_bind_pingpong_blk)(struct dpu_hw_dsc *hw_dsc,
-				  bool enable,
 				  enum dpu_pingpong pp);
 };
 
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
index 2d9192a..56826a9 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
@@ -191,7 +191,8 @@ enum dpu_dsc {
 };
 
 enum dpu_pingpong {
-	PINGPONG_0 = 1,
+	PINGPONG_NONE,
+	PINGPONG_0,
 	PINGPONG_1,
 	PINGPONG_2,
 	PINGPONG_3,
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project