[PATCH v2 08/13] drm/panel: sitronix-st7789v: avoid hardcoding mode info

Michael Riesch michael.riesch at wolfvision.net
Fri May 5 12:33:38 UTC 2023


Hi Sebastian,

Thanks for the v2 of your series. Looks great!

One nitpick though: you seem to wrap the patch message lines at ~50
characters sometimes, which is awfully short.

Another comment below:

On 4/22/23 22:50, Sebastian Reichel wrote:
> Avoid hard-coding the default_mode and supply it from match data. One
> additional layer of abstraction has been introduced, which will be
> needed for specifying other panel information (e.g. bus flags) in the
> next steps.
> 
> Signed-off-by: Sebastian Reichel <sre at kernel.org>
> ---
>  .../gpu/drm/panel/panel-sitronix-st7789v.c    | 24 ++++++++++++++-----
>  1 file changed, 18 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7789v.c b/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
> index a6d6155ef45c..29c2a91f8299 100644
> --- a/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
> +++ b/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
> @@ -108,8 +108,13 @@
>  			return val;		\
>  	} while (0)
>  
> +struct st7789_panel_info {
> +	const struct drm_display_mode *mode;
> +};
> +
>  struct st7789v {
>  	struct drm_panel panel;
> +	const struct st7789_panel_info *info;
>  	struct spi_device *spi;
>  	struct gpio_desc *reset;
>  	struct regulator *power;
> @@ -160,16 +165,21 @@ static const struct drm_display_mode default_mode = {
>  	.vtotal = 320 + 8 + 4 + 4,
>  };
>  
> +struct st7789_panel_info default_panel = {
> +	.mode = &default_mode,
> +};

Shouldn't this be "static const struct st7789_panel_info default_panel"?

(Same holds for "struct st7789_panel_info t28cp45tn89_panel" in patch
13/13.)

With the comments above addressed, feel free to add my

Reviewed-by: Michael Riesch <michael.riesch at wolfvision.net>

to the whole v3 of your series.

Thanks and best regards,
Michael

> +
>  static int st7789v_get_modes(struct drm_panel *panel,
>  			     struct drm_connector *connector)
>  {
> +	struct st7789v *ctx = panel_to_st7789v(panel);
>  	struct drm_display_mode *mode;
>  
> -	mode = drm_mode_duplicate(connector->dev, &default_mode);
> +	mode = drm_mode_duplicate(connector->dev, ctx->info->mode);
>  	if (!mode) {
> -		dev_err(panel->dev, "failed to add mode %ux%ux@%u\n",
> -			default_mode.hdisplay, default_mode.vdisplay,
> -			drm_mode_vrefresh(&default_mode));
> +		dev_err(panel->dev, "failed to add mode %ux%u@%u\n",
> +			ctx->info->mode->hdisplay, ctx->info->mode->vdisplay,
> +			drm_mode_vrefresh(ctx->info->mode));
>  		return -ENOMEM;
>  	}
>  
> @@ -359,6 +369,8 @@ static int st7789v_probe(struct spi_device *spi)
>  	spi_set_drvdata(spi, ctx);
>  	ctx->spi = spi;
>  
> +	ctx->info = device_get_match_data(&spi->dev);
> +
>  	drm_panel_init(&ctx->panel, dev, &st7789v_drm_funcs,
>  		       DRM_MODE_CONNECTOR_DPI);
>  
> @@ -389,13 +401,13 @@ static void st7789v_remove(struct spi_device *spi)
>  }
>  
>  static const struct spi_device_id st7789v_spi_id[] = {
> -	{ "st7789v" },
> +	{ "st7789v", (unsigned long) &default_panel },
>  	{ }
>  };
>  MODULE_DEVICE_TABLE(spi, st7789v_spi_id);
>  
>  static const struct of_device_id st7789v_of_match[] = {
> -	{ .compatible = "sitronix,st7789v" },
> +	{ .compatible = "sitronix,st7789v", .data = &default_panel },
>  	{ }
>  };
>  MODULE_DEVICE_TABLE(of, st7789v_of_match);


More information about the dri-devel mailing list