[PATCH v3 08/12] drm/msm/dpu: Add SM6375 support
Konrad Dybcio
konrad.dybcio at linaro.org
Mon May 8 08:43:39 UTC 2023
On 7.05.2023 22:02, Dmitry Baryshkov wrote:
> On 06/05/2023 00:40, Konrad Dybcio wrote:
>> Add basic SM6375 support to the DPU1 driver to enable display output.
>>
>> Signed-off-by: Konrad Dybcio <konrad.dybcio at linaro.org>
>> ---
>> .../gpu/drm/msm/disp/dpu1/catalog/dpu_6_9_sm6375.h | 152 +++++++++++++++++++++
>> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 1 +
>> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 +
>> drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 +
>> 4 files changed, 155 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_6_9_sm6375.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_6_9_sm6375.h
>> new file mode 100644
>> index 000000000000..c7f303b0557e
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_6_9_sm6375.h
>> @@ -0,0 +1,152 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * Copyright (c) 2022. Qualcomm Innovation Center, Inc. All rights reserved.
>> + * Copyright (c) 2015-2018, 2020 The Linux Foundation. All rights reserved.
>> + * Copyright (c) 2023, Linaro Limited
>> + */
>> +
>> +#ifndef _DPU_6_9_SM6375_H
>> +#define _DPU_6_9_SM6375_H
>> +
>> +static const struct dpu_caps sm6375_dpu_caps = {
>> + .max_mixer_width = DEFAULT_DPU_LINE_WIDTH,
>> + .max_mixer_blendstages = 0x4,
>> + .qseed_type = DPU_SSPP_SCALER_QSEED4,
>> + .has_dim_layer = true,
>> + .has_idle_pc = true,
>> + .max_linewidth = 2160,
>> + .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
>> +};
>> +
>> +static const struct dpu_ubwc_cfg sm6375_ubwc_cfg = {
>> + .ubwc_version = DPU_HW_UBWC_VER_20,
>> + .ubwc_swizzle = 6,
>> + .highest_bank_bit = 1,
>> +};
>> +
>> +static const struct dpu_mdp_cfg sm6375_mdp[] = {
>> + {
>> + .name = "top_0", .id = MDP_TOP,
>> + .base = 0x0, .len = 0x494,
>> + .features = 0,
>> + .clk_ctrls[DPU_CLK_CTRL_VIG0] = { .reg_off = 0x2ac, .bit_off = 0 },
>> + .clk_ctrls[DPU_CLK_CTRL_DMA0] = { .reg_off = 0x2ac, .bit_off = 8 },
>> + },
>> +};
>> +
>> +static const struct dpu_ctl_cfg sm6375_ctl[] = {
>> + {
>> + .name = "ctl_0", .id = CTL_0,
>> + .base = 0x1000, .len = 0x1dc,
>> + .features = BIT(DPU_CTL_ACTIVE_CFG),
>> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 9),
>> + },
>> +};
>> +
>> +static const struct dpu_sspp_cfg sm6375_sspp[] = {
>> + SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, 0x1f8, VIG_SC7180_MASK,
>> + sm6115_vig_sblk_0, 0, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0),
>> + SSPP_BLK("sspp_8", SSPP_DMA0, 0x24000, 0x1f8, DMA_SDM845_MASK,
>> + sdm845_dma_sblk_0, 1, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA0),
>> +};
>> +
>> +static const struct dpu_lm_cfg sm6375_lm[] = {
>> + LM_BLK("lm_0", LM_0, 0x44000, MIXER_QCM2290_MASK,
>> + &qcm2290_lm_sblk, PINGPONG_0, 0, DSPP_0),
>> +};
>> +
>> +static const struct dpu_dspp_cfg sm6375_dspp[] = {
>> + DSPP_BLK("dspp_0", DSPP_0, 0x54000, DSPP_SC7180_MASK,
>> + &sm8150_dspp_sblk),
>> +};
>> +
>> +static const struct dpu_pingpong_cfg sm6375_pp[] = {
>> + PP_BLK("pingpong_0", PINGPONG_0, 0x70000, PINGPONG_SM8150_MASK, 0, sdm845_pp_sblk,
>> + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
>> + -1),
>> +};
>> +
>> +static const struct dpu_intf_cfg sm6375_intf[] = {
>> + INTF_BLK("intf_0", INTF_0, 0x00000, 0x2c0, INTF_NONE, 0, 0, 0, 0, 0),
>> + INTF_BLK_DSI_TE("intf_1", INTF_1, 0x6a800, 0x2c0, INTF_DSI, 0, 24, INTF_SC7280_MASK,
>
> If I understand correctly, all 5.x and 6.x DPU also have HCTL/DATA_ACTIVE/etc. registers. (I do not know about the sdm845, if it has that reg or not). So a proper fix would be to add DPU_DATA_HCTL_EN to sc7180 mask rather than upgrading sm6375 to use sc7280 mask.
They're touched unconditionally on msm-4.14 (8150 /and 7180 I think/ release)
Konrad
>
>> + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 26),
>> + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 27),
>> + DPU_IRQ_IDX(MDP_INTF1_TEAR_INTR, 2)),
>> +};
>> +
>> +static const struct dpu_vbif_cfg sm6375_vbif[] = {
>> + {
>> + .name = "vbif_0", .id = VBIF_RT,
>> + .base = 0, .len = 0x2008,
>> + .features = BIT(DPU_VBIF_QOS_REMAP),
>> + .xin_halt_timeout = 0x4000,
>> + .qos_rp_remap_size = 0x40,
>> + .qos_rt_tbl = {
>> + .npriority_lvl = ARRAY_SIZE(sdm845_rt_pri_lvl),
>> + .priority_lvl = sdm845_rt_pri_lvl,
>> + },
>> + .qos_nrt_tbl = {
>> + .npriority_lvl = ARRAY_SIZE(sdm845_nrt_pri_lvl),
>> + .priority_lvl = sdm845_nrt_pri_lvl,
>> + },
>> + .memtype_count = 14,
>> + .memtype = {3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3},
>> + },
>> +};
>> +
>> +static const struct dpu_perf_cfg sm6375_perf_data = {
>> + .max_bw_low = 5200000,
>> + .max_bw_high = 6200000,
>> + .min_core_ib = 2500000,
>> + .min_llcc_ib = 0, /* No LLCC on this SoC */
>> + .min_dram_ib = 1600000,
>> + .min_prefill_lines = 24,
>> + /* TODO: confirm danger_lut_tbl */
>> + .danger_lut_tbl = {0xffff, 0xffff, 0x0, 0x0, 0xffff},
>> + .qos_lut_tbl = {
>> + {.nentry = ARRAY_SIZE(sm6350_qos_linear_macrotile),
>> + .entries = sm6350_qos_linear_macrotile
>> + },
>> + {.nentry = ARRAY_SIZE(sm6350_qos_linear_macrotile),
>> + .entries = sm6350_qos_linear_macrotile
>> + },
>> + {.nentry = ARRAY_SIZE(sc7180_qos_nrt),
>> + .entries = sc7180_qos_nrt
>> + },
>> + },
>> + .cdp_cfg = {
>> + {.rd_enable = 1, .wr_enable = 1},
>> + {.rd_enable = 1, .wr_enable = 0}
>> + },
>> + .clk_inefficiency_factor = 105,
>> + .bw_inefficiency_factor = 120,
>> +};
>> +
>> +const struct dpu_mdss_cfg dpu_sm6375_cfg = {
>> + .caps = &sm6375_dpu_caps,
>> + .ubwc = &sm6375_ubwc_cfg,
>> + .mdp_count = ARRAY_SIZE(sm6375_mdp),
>> + .mdp = sm6375_mdp,
>> + .ctl_count = ARRAY_SIZE(sm6375_ctl),
>> + .ctl = sm6375_ctl,
>> + .sspp_count = ARRAY_SIZE(sm6375_sspp),
>> + .sspp = sm6375_sspp,
>> + .mixer_count = ARRAY_SIZE(sm6375_lm),
>> + .mixer = sm6375_lm,
>> + .dspp_count = ARRAY_SIZE(sm6375_dspp),
>> + .dspp = sm6375_dspp,
>> + .pingpong_count = ARRAY_SIZE(sm6375_pp),
>> + .pingpong = sm6375_pp,
>> + .intf_count = ARRAY_SIZE(sm6375_intf),
>> + .intf = sm6375_intf,
>> + .vbif_count = ARRAY_SIZE(sm6375_vbif),
>> + .vbif = sm6375_vbif,
>> + .perf = &sm6375_perf_data,
>> + .mdss_irqs = BIT(MDP_SSPP_TOP0_INTR) | \
>> + BIT(MDP_SSPP_TOP0_INTR2) | \
>> + BIT(MDP_SSPP_TOP0_HIST_INTR) | \
>> + BIT(MDP_INTF1_INTR) | \
>> + BIT(MDP_INTF1_TEAR_INTR),
>> +};
>> +
>> +#endif
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
>> index 5ef1dffc27dc..7577572a5ef4 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
>> @@ -809,6 +809,7 @@ static const struct dpu_qos_lut_entry sc7180_qos_nrt[] = {
>> #include "catalog/dpu_6_3_sm6115.h"
>> #include "catalog/dpu_6_4_sm6350.h"
>> #include "catalog/dpu_6_5_qcm2290.h"
>> +#include "catalog/dpu_6_9_sm6375.h"
>> #include "catalog/dpu_7_0_sm8350.h"
>> #include "catalog/dpu_7_2_sc7280.h"
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>> index 56af77353b1e..96a8ec02b5b8 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>> @@ -884,6 +884,7 @@ extern const struct dpu_mdss_cfg dpu_sc7180_cfg;
>> extern const struct dpu_mdss_cfg dpu_sm6115_cfg;
>> extern const struct dpu_mdss_cfg dpu_sm6350_cfg;
>> extern const struct dpu_mdss_cfg dpu_qcm2290_cfg;
>> +extern const struct dpu_mdss_cfg dpu_sm6375_cfg;
>> extern const struct dpu_mdss_cfg dpu_sm8350_cfg;
>> extern const struct dpu_mdss_cfg dpu_sc7280_cfg;
>> extern const struct dpu_mdss_cfg dpu_sc8280xp_cfg;
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
>> index 46be7ad8d615..980c3c8f8269 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
>> @@ -1287,6 +1287,7 @@ static const struct of_device_id dpu_dt_match[] = {
>> { .compatible = "qcom,sc8280xp-dpu", .data = &dpu_sc8280xp_cfg, },
>> { .compatible = "qcom,sm6115-dpu", .data = &dpu_sm6115_cfg, },
>> { .compatible = "qcom,sm6350-dpu", .data = &dpu_sm6350_cfg, },
>> + { .compatible = "qcom,sm6375-dpu", .data = &dpu_sm6375_cfg, },
>> { .compatible = "qcom,sm8150-dpu", .data = &dpu_sm8150_cfg, },
>> { .compatible = "qcom,sm8250-dpu", .data = &dpu_sm8250_cfg, },
>> { .compatible = "qcom,sm8350-dpu", .data = &dpu_sm8350_cfg, },
>>
>
More information about the dri-devel
mailing list