[PATCH 1/4] ARM: dts: qcom: msm8974: add ocmem clock to GPU

[Dmitry Baryshkov]

On 08/05/2023 13:28, Konrad Dybcio wrote:
> 
> 
> On 8.05.2023 12:24, Dmitry Baryshkov wrote:
>> On 08/05/2023 11:30, Konrad Dybcio wrote:
>>>
>>>
>>> On 7.05.2023 21:07, Dmitry Baryshkov wrote:
>>>> To get GPU working with the OCMEM, the oxili_ocmemgx_clk clock should be
>>>> enabled. Pass it to the GPU to get it to work on apq8074/msm8974 boards.
>>>>
>>>> Fixes: fe079442db63 ("ARM: dts: qcom: msm8974: add gpu support")
>>>> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
>>>> ---
>>> Uhh.. this clock should be managed by RPM with:
>>>
>>> type = MEM
>>> id = 2
>>>
>>> just like it's defined for 8994 today.
>>>
>>> Could you try adding it in rpmcc and confirming?
>>
>> There is an RPM_SMD_OCMEMGX_CLK clk already, it is a bus clock for the ocmemnoc.
> It's wrong.

Can you possibly be more specific here?

On 8974 RPM_SMD_OCMEMGX_CLK is a core clock for ocmem and a bus clock 
for ocmemnoc.

On 8994 this clocks is just a core clock for ocmem, there is no ocmemnoc.


> 
> Konrad
>>
>>>
>>> Konrad
>>>>    arch/arm/boot/dts/qcom-msm8974.dtsi | 3 ++-
>>>>    1 file changed, 2 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
>>>> index 834ad95515b1..fb661c1bd3d5 100644
>>>> --- a/arch/arm/boot/dts/qcom-msm8974.dtsi
>>>> +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
>>>> @@ -2104,8 +2104,9 @@ gpu: adreno at fdb00000 {
>>>>                  clocks = <&mmcc OXILI_GFX3D_CLK>,
>>>>                     <&mmcc OXILICX_AHB_CLK>,
>>>> +                 <&mmcc OXILI_OCMEMGX_CLK>,
>>>>                     <&mmcc OXILICX_AXI_CLK>;
>>>> -            clock-names = "core", "iface", "mem_iface";
>>>> +            clock-names = "core", "iface", "mem", "mem_iface";
>>>>                  sram = <&gmu_sram>;
>>>>                power-domains = <&mmcc OXILICX_GDSC>;
>>

-- 
With best wishes
Dmitry