[PATCH 3/4] ARM: dts: qcom: apq8074-dragonboard: enable adsp and MSS

[Dmitry Baryshkov]

On 08/05/2023 13:49, Dmitry Baryshkov wrote:
> On 08/05/2023 13:38, Konrad Dybcio wrote:
>>
>>
>> On 8.05.2023 12:33, Dmitry Baryshkov wrote:
>>> On 08/05/2023 11:33, Konrad Dybcio wrote:
>>>>
>>>>
>>>> On 7.05.2023 21:07, Dmitry Baryshkov wrote:
>>>>> Enable ADSP and Modem DSPs on APQ8074 dragonboard. The MSS region
>>>>> differs from the one defined in the msm8974, so it overriden locally.
>>>>>
>>>>> The modem is specified use mba.mbn instead of mbn.b00 (for the sake of
>>>>> similarity with other platforms). This requires a patch for remoteproc
>>>>> to be applied [1].
>>>>>
>>>>> [1] 
>>>>> https://lore.kernel.org/all/20230507172041.2320279-1-dmitry.baryshkov@linaro.org/
>>>>>
>>>>> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
>>>>> ---
>>>>>    .../arm/boot/dts/qcom-apq8074-dragonboard.dts | 28 
>>>>> +++++++++++++++++++
>>>>>    1 file changed, 28 insertions(+)
>>>>>
>>>>> diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts 
>>>>> b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
>>>>> index 6b047c679370..c893afc00eb4 100644
>>>>> --- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
>>>>> +++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
>>>>> @@ -4,6 +4,8 @@
>>>>>    #include "qcom-pm8841.dtsi"
>>>>>    #include "qcom-pm8941.dtsi"
>>>>>    +/delete-node/ &mpss_region;
>>>>> +
>>>>>    / {
>>>>>        model = "Qualcomm APQ8074 Dragonboard";
>>>>>        compatible = "qcom,apq8074-dragonboard", "qcom,apq8074";
>>>>> @@ -17,6 +19,13 @@ aliases {
>>>>>        chosen {
>>>>>            stdout-path = "serial0:115200n8";
>>>>>        };
>>>>> +
>>>>> +    reserved-memory {
>>>>> +        mpss_region: mpss at ac00000 {
>>>>> +            reg = <0x0ac00000 0x2500000>;
>>>>> +            no-map;
>>>>> +        };
>>>>> +    };
>>>>>    };
>>>>>      &blsp1_uart2 {
>>>>> @@ -39,6 +48,25 @@ eeprom: eeprom at 52 {
>>>>>        };
>>>>>    };
>>>>>    +&remoteproc_adsp {
>>>>> +    cx-supply = <&pm8841_s2>;
>>>>> +
>>>>> +    firmware-name = "qcom/apq8074/adsp.mbn";
>>>>> +
>>>>> +    status = "okay";
>>>>> +};
>>>>> +
>>>>> +&remoteproc_mss {
>>>>> +    cx-supply = <&pm8841_s2>;
>>>>> +    mss-supply = <&pm8841_s3>;
>>>>> +    mx-supply = <&pm8841_s1>;
>>>>> +    pll-supply = <&pm8941_l12>;
>>>> High time to move this to rpmpd!
>>>> I won't object to adding this though, as it obviously works
>>>> and is already used on other boards..
>>>
>>> I think the problem is that they are not level-voted on this 
>>> platform, so they are regulators, not PDs.
>> They're corner-voted.
> 
> Hmm. Indeed. In msm8974-regulators I see both voltage and corner entries 
> for these regulators.

Checked. Only CX and GFX (yes, MX not included) are enabled as corners 
in vendor dtsi. So this probably doesn't gain us a lot.

> 
>>
>> Konrad
>>>
>>>>
>>>>> +
>>>>> +    firmware-name = "qcom/apq8074/mba.mbn", "qcom/apq8074/modem.mbn";
>>>> Could you please keep it one entry per line?
>>>
>>> Sure.
>>>
>>>>
>>>> Otherwise,
>>>>
>>>> Reviewed-by: Konrad Dybcio <konrad.dybcio at linaro.org>
>>>>
>>>> Konrad
>>>>> +
>>>>> +    status = "okay";
>>>>> +};
>>>>> +
>>>>>    &rpm_requests {
>>>>>        regulators-0 {
>>>>>            compatible = "qcom,rpm-pm8841-regulators";
>>>
> 

-- 
With best wishes
Dmitry