[PATCH v6 8/8] drm/msm/dpu: tear down DSC data path when DSC disabled

[Dmitry Baryshkov]

On 11/05/2023 01:07, Kuogee Hsieh wrote:
> Unset DSC_ACTIVE bit at dpu_hw_ctl_reset_intf_cfg_v1(),
> dpu_encoder_unprep_dsc() and dpu_encoder_dsc_pipe_clr() functions
> to tear down DSC data path if DSC data path was setup previous.
> 
> Signed-off-by: Kuogee Hsieh <quic_khsieh at quicinc.com>
> ---
>   drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 44 +++++++++++++++++++++++++++++
>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c  |  7 +++++
>   2 files changed, 51 insertions(+)
> 
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> index 94b805b..6500589 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> @@ -1214,6 +1214,45 @@ static void dpu_encoder_virt_atomic_enable(struct drm_encoder *drm_enc,
>   	mutex_unlock(&dpu_enc->enc_lock);
>   }
>   
> +static void dpu_encoder_dsc_pipe_clr(struct dpu_encoder_virt *dpu_enc,
> +                                     struct dpu_hw_dsc *hw_dsc,
> +                                     struct dpu_hw_pingpong *hw_pp)
> +{
> +	struct dpu_encoder_phys *cur_master = dpu_enc->cur_master;
> +	struct dpu_hw_ctl *ctl;
> +
> +	ctl = cur_master->hw_ctl;
> +
> +	if (hw_dsc->ops.dsc_disable)
> +		hw_dsc->ops.dsc_disable(hw_dsc);
> +
> +	if (hw_pp->ops.disable_dsc)
> +		hw_pp->ops.disable_dsc(hw_pp);
> +
> +	if (hw_dsc->ops.dsc_bind_pingpong_blk)
> +		hw_dsc->ops.dsc_bind_pingpong_blk(hw_dsc, PINGPONG_NONE);
> +
> +	if (ctl->ops.update_pending_flush_dsc)
> +		ctl->ops.update_pending_flush_dsc(ctl, hw_dsc->idx);
> +}
> +
> +static void dpu_encoder_unprep_dsc(struct dpu_encoder_virt *dpu_enc)
> +{
> +	/* coding only for 2LM, 2enc, 1 dsc config */
> +	struct dpu_hw_dsc *hw_dsc[MAX_CHANNELS_PER_ENC];
> +	struct dpu_hw_pingpong *hw_pp[MAX_CHANNELS_PER_ENC];
> +	int i;
> +
> +	for (i = 0; i < MAX_CHANNELS_PER_ENC; i++) {
> +		hw_pp[i] = dpu_enc->hw_pp[i];
> +		hw_dsc[i] = dpu_enc->hw_dsc[i];
> +
> +		if (hw_pp[i] && hw_dsc[i])
> +			dpu_encoder_dsc_pipe_clr(dpu_enc, hw_dsc[i], hw_pp[i]);
> +	}
> +
> +}
> +
>   static void dpu_encoder_virt_atomic_disable(struct drm_encoder *drm_enc,
>   					struct drm_atomic_state *state)
>   {
> @@ -2090,6 +2129,9 @@ void dpu_encoder_helper_phys_cleanup(struct dpu_encoder_phys *phys_enc)
>   					phys_enc->hw_pp->merge_3d->idx);
>   	}
>   
> +	if (dpu_enc->dsc)
> +		dpu_encoder_unprep_dsc(dpu_enc);
> +
>   	intf_cfg.stream_sel = 0; /* Don't care value for video mode */
>   	intf_cfg.mode_3d = dpu_encoder_helper_get_3d_blend_mode(phys_enc);
>   
> @@ -2101,6 +2143,8 @@ void dpu_encoder_helper_phys_cleanup(struct dpu_encoder_phys *phys_enc)
>   	if (phys_enc->hw_pp->merge_3d)
>   		intf_cfg.merge_3d = phys_enc->hw_pp->merge_3d->idx;
>   
> +	intf_cfg.dsc = dpu_encoder_helper_get_dsc(phys_enc);
> +
>   	if (ctl->ops.reset_intf_cfg)
>   		ctl->ops.reset_intf_cfg(ctl, &intf_cfg);
>   
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> index 832a6a7..b34dac5 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> @@ -577,6 +577,7 @@ static void dpu_hw_ctl_reset_intf_cfg_v1(struct dpu_hw_ctl *ctx,
>   	u32 intf_active = 0;
>   	u32 wb_active = 0;
>   	u32 merge3d_active = 0;
> +	u32 dsc_active;
>   
>   	/*
>   	 * This API resets each portion of the CTL path namely,
> @@ -606,6 +607,12 @@ static void dpu_hw_ctl_reset_intf_cfg_v1(struct dpu_hw_ctl *ctx,
>   		wb_active &= ~BIT(cfg->wb - WB_0);
>   		DPU_REG_WRITE(c, CTL_WB_ACTIVE, wb_active);
>   	}
> +
> +	if (cfg->dsc) {
> +		dsc_active = DPU_REG_READ(c, CTL_DSC_ACTIVE);
> +		dsc_active &= ~cfg->dsc;
> +		DPU_REG_WRITE(c, CTL_DSC_ACTIVE, dsc_active);
> +	}
>   }
>   
>   static void dpu_hw_ctl_set_fetch_pipe_active(struct dpu_hw_ctl *ctx,

-- 
With best wishes
Dmitry