[PATCH v8 2/8] drm/msm/dpu: add DPU_PINGPONG_DSC feature bit for DPU < 7.0.0

[Dmitry Baryshkov]

On 12/05/2023 21:00, Kuogee Hsieh wrote:
> DPU < 7.0.0 requires the PINGPONG block to be involved during
> DSC setting up. Since DPU >= 7.0.0, enabling and starting the DSC
> encoder engine was moved to INTF with the help of the flush mechanism.
> Add a DPU_PINGPONG_DSC feature bit to restrict the availability of
> dpu_hw_pp_setup_dsc() and dpu_hw_pp_dsc_{enable,disable}() on the
> PINGPONG block to DPU < 7.0.0 hardware, as the registers are not
> available [in the PINGPONG block] on DPU 7.0.0 and higher anymore.
> Add DPU_PINGPONG_DSC to PINGPONG_SDM845_MASK, PINGPONG_SDM845_TE2_MASK
> and PINGPONG_SM8150_MASK which is used for all DPU < 7.0 chipsets.
> 
> changes in v6:
> -- split patches and rearrange to keep catalog related files at this patch
> 
> changes in v7:
> -- rewording commit text as suggested at review comments
> 
> Signed-off-by: Kuogee Hsieh <quic_khsieh at quicinc.com>

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>

Single nit below

> ---
>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 6 +++---
>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 4 +++-
>   2 files changed, 6 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> index 82b58c6..78e4bf6 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> @@ -76,13 +76,13 @@
>   	(BIT(DPU_DIM_LAYER) | BIT(DPU_MIXER_COMBINED_ALPHA))
>   
>   #define PINGPONG_SDM845_MASK \
> -	(BIT(DPU_PINGPONG_DITHER) | BIT(DPU_PINGPONG_TE))
> +	(BIT(DPU_PINGPONG_DITHER) | BIT(DPU_PINGPONG_TE) | BIT(DPU_PINGPONG_DSC))
>   
>   #define PINGPONG_SDM845_TE2_MASK \
> -	(PINGPONG_SDM845_MASK | BIT(DPU_PINGPONG_TE2))
> +	(PINGPONG_SDM845_MASK | BIT(DPU_PINGPONG_TE2) | BIT(DPU_PINGPONG_DSC))
>   
>   #define PINGPONG_SM8150_MASK \
> -	(BIT(DPU_PINGPONG_DITHER))
> +	(BIT(DPU_PINGPONG_DITHER) | BIT(DPU_PINGPONG_DSC))
>   
>   #define CTL_SC7280_MASK \
>   	(BIT(DPU_CTL_ACTIVE_CFG) | \
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> index 6ee48f0..dc0a4da 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> @@ -144,7 +144,8 @@ enum {
>    * @DPU_PINGPONG_TE2        Additional tear check block for split pipes
>    * @DPU_PINGPONG_SPLIT      PP block supports split fifo
>    * @DPU_PINGPONG_SLAVE      PP block is a suitable slave for split fifo
> - * @DPU_PINGPONG_DITHER,    Dither blocks
> + * @DPU_PINGPONG_DITHER     Dither blocks

Ideally this should be a separate commit. It is irrelevant to 
DPU_PINGPONG_DSC

> + * @DPU_PINGPONG_DSC        PP ops functions required for DSC
>    * @DPU_PINGPONG_MAX
>    */
>   enum {
> @@ -153,6 +154,7 @@ enum {
>   	DPU_PINGPONG_SPLIT,
>   	DPU_PINGPONG_SLAVE,
>   	DPU_PINGPONG_DITHER,
> +	DPU_PINGPONG_DSC,
>   	DPU_PINGPONG_MAX
>   };
>   

-- 
With best wishes
Dmitry