[RFC PATCH v2 05/13] drm/msm/dpu: get rid of struct dpu_rm_requirements
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Sun May 14 17:06:18 UTC 2023
On Sat, 13 May 2023 at 01:39, Abhinav Kumar <quic_abhinavk at quicinc.com> wrote:
> On 3/20/2023 6:18 PM, Dmitry Baryshkov wrote:
> > The struct dpu_rm_requirements was used to wrap display topology and
> > hw resources, which meant INTF indices. As of commit ef58e0ad3436
> > ("drm/msm/dpu: get INTF blocks directly rather than through RM") the hw
> > resources struct was removed, leaving struct dpu_rm_requirements
> > containing a single field (topology). Remove the useless wrapper.
> >
> > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> > ---
>
> Irrespective of where we plan to have the topology, this change doesn't
> seem incorrect as such.
>
> The only thing I can think of is when we need more information to be
> passed to the RM to allocate the blocks in addition to the topology this
> struct could have been expanded.
>
> So one example I can think of is lets say I want to add CDM block
> support. Then that information is outside of topology today because I
> will use CDM if my output format is yuv. It has nothing to do with
> topology but that block still needs to come from RM.
I'd say, it is a part of the topology. CDM blocks are a part of the
pipeline, aren't they?
If you prefer, we can rename msm_display_topology to dpu_rm_requirements itself.
> I know that usually I have lost on these type of discussions saying that
> if the code is not there yet, it should be dropped but I do have a plan
> to add that support soon probably by the next cycle. That time we will
> need some sort of wrapper to hold the topology and "extra" information
> to allocate the blocks.
>
> One alternative ofcourse is to expand dpu_rm_reserve() to accept
> something like "needs_cdm" but this is not scalable.
>
> Thoughts?
>
> > drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 2 +-
> > drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c | 69 +++++++--------------
> > drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h | 2 +-
> > 3 files changed, 23 insertions(+), 50 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> > index 4ee708264f3b..a2cb23dea0b8 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> > @@ -638,7 +638,7 @@ static int dpu_encoder_virt_atomic_check(
> >
> > if (!crtc_state->active_changed || crtc_state->enable)
> > ret = dpu_rm_reserve(&dpu_kms->rm, global_state,
> > - drm_enc, crtc_state, topology);
> > + drm_enc, crtc_state, &topology);
> > }
> >
> > trace_dpu_enc_atomic_check_flags(DRMID(drm_enc), adj_mode->flags);
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
> > index f4dda88a73f7..952e139c0234 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
> > @@ -24,15 +24,6 @@ static inline bool reserved_by_other(uint32_t *res_map, int idx,
> > return res_map[idx] && res_map[idx] != enc_id;
> > }
> >
> > -/**
> > - * struct dpu_rm_requirements - Reservation requirements parameter bundle
> > - * @topology: selected topology for the display
> > - * @hw_res: Hardware resources required as reported by the encoders
> > - */
> > -struct dpu_rm_requirements {
> > - struct msm_display_topology topology;
> > -};
> > -
> > int dpu_rm_destroy(struct dpu_rm *rm)
> > {
> > int i;
> > @@ -329,14 +320,13 @@ static bool _dpu_rm_check_lm_peer(struct dpu_rm *rm, int primary_idx,
> > * mixer in rm->pingpong_blks[].
> > * @dspp_idx: output parameter, index of dspp block attached to the layer
> > * mixer in rm->dspp_blks[].
> > - * @reqs: input parameter, rm requirements for HW blocks needed in the
> > - * datapath.
> > + * @topology: selected topology for the display
> > * Return: true if lm matches all requirements, false otherwise
> > */
> > static bool _dpu_rm_check_lm_and_get_connected_blks(struct dpu_rm *rm,
> > struct dpu_global_state *global_state,
> > uint32_t enc_id, int lm_idx, int *pp_idx, int *dspp_idx,
> > - struct dpu_rm_requirements *reqs)
> > + struct msm_display_topology *topology)
> > {
> > const struct dpu_lm_cfg *lm_cfg;
> > int idx;
> > @@ -361,7 +351,7 @@ static bool _dpu_rm_check_lm_and_get_connected_blks(struct dpu_rm *rm,
> > }
> > *pp_idx = idx;
> >
> > - if (!reqs->topology.num_dspp)
> > + if (!topology->num_dspp)
> > return true;
> >
> > idx = lm_cfg->dspp - DSPP_0;
> > @@ -383,7 +373,7 @@ static bool _dpu_rm_check_lm_and_get_connected_blks(struct dpu_rm *rm,
> > static int _dpu_rm_reserve_lms(struct dpu_rm *rm,
> > struct dpu_global_state *global_state,
> > uint32_t enc_id,
> > - struct dpu_rm_requirements *reqs)
> > + struct msm_display_topology *topology)
> >
> > {
> > int lm_idx[MAX_BLOCKS];
> > @@ -391,14 +381,14 @@ static int _dpu_rm_reserve_lms(struct dpu_rm *rm,
> > int dspp_idx[MAX_BLOCKS] = {0};
> > int i, j, lm_count = 0;
> >
> > - if (!reqs->topology.num_lm) {
> > - DPU_ERROR("invalid number of lm: %d\n", reqs->topology.num_lm);
> > + if (!topology->num_lm) {
> > + DPU_ERROR("invalid number of lm: %d\n", topology->num_lm);
> > return -EINVAL;
> > }
> >
> > /* Find a primary mixer */
> > for (i = 0; i < ARRAY_SIZE(rm->mixer_blks) &&
> > - lm_count < reqs->topology.num_lm; i++) {
> > + lm_count < topology->num_lm; i++) {
> > if (!rm->mixer_blks[i])
> > continue;
> >
> > @@ -407,7 +397,7 @@ static int _dpu_rm_reserve_lms(struct dpu_rm *rm,
> >
> > if (!_dpu_rm_check_lm_and_get_connected_blks(rm, global_state,
> > enc_id, i, &pp_idx[lm_count],
> > - &dspp_idx[lm_count], reqs)) {
> > + &dspp_idx[lm_count], topology)) {
> > continue;
> > }
> >
> > @@ -415,7 +405,7 @@ static int _dpu_rm_reserve_lms(struct dpu_rm *rm,
> >
> > /* Valid primary mixer found, find matching peers */
> > for (j = i + 1; j < ARRAY_SIZE(rm->mixer_blks) &&
> > - lm_count < reqs->topology.num_lm; j++) {
> > + lm_count < topology->num_lm; j++) {
> > if (!rm->mixer_blks[j])
> > continue;
> >
> > @@ -428,7 +418,7 @@ static int _dpu_rm_reserve_lms(struct dpu_rm *rm,
> > if (!_dpu_rm_check_lm_and_get_connected_blks(rm,
> > global_state, enc_id, j,
> > &pp_idx[lm_count], &dspp_idx[lm_count],
> > - reqs)) {
> > + topology)) {
> > continue;
> > }
> >
> > @@ -437,7 +427,7 @@ static int _dpu_rm_reserve_lms(struct dpu_rm *rm,
> > }
> > }
> >
> > - if (lm_count != reqs->topology.num_lm) {
> > + if (lm_count != topology->num_lm) {
> > DPU_DEBUG("unable to find appropriate mixers\n");
> > return -ENAVAIL;
> > }
> > @@ -446,7 +436,7 @@ static int _dpu_rm_reserve_lms(struct dpu_rm *rm,
> > global_state->mixer_to_enc_id[lm_idx[i]] = enc_id;
> > global_state->pingpong_to_enc_id[pp_idx[i]] = enc_id;
> > global_state->dspp_to_enc_id[dspp_idx[i]] =
> > - reqs->topology.num_dspp ? enc_id : 0;
> > + topology->num_dspp ? enc_id : 0;
> >
> > trace_dpu_rm_reserve_lms(lm_idx[i] + LM_0, enc_id,
> > pp_idx[i] + PINGPONG_0);
> > @@ -539,44 +529,30 @@ static int _dpu_rm_make_reservation(
> > struct dpu_rm *rm,
> > struct dpu_global_state *global_state,
> > struct drm_encoder *enc,
> > - struct dpu_rm_requirements *reqs)
> > + struct msm_display_topology *topology)
> > {
> > int ret;
> >
> > - ret = _dpu_rm_reserve_lms(rm, global_state, enc->base.id, reqs);
> > + ret = _dpu_rm_reserve_lms(rm, global_state, enc->base.id, topology);
> > if (ret) {
> > DPU_ERROR("unable to find appropriate mixers\n");
> > return ret;
> > }
> >
> > ret = _dpu_rm_reserve_ctls(rm, global_state, enc->base.id,
> > - &reqs->topology);
> > + topology);
> > if (ret) {
> > DPU_ERROR("unable to find appropriate CTL\n");
> > return ret;
> > }
> >
> > - ret = _dpu_rm_reserve_dsc(rm, global_state, enc, &reqs->topology);
> > + ret = _dpu_rm_reserve_dsc(rm, global_state, enc, topology);
> > if (ret)
> > return ret;
> >
> > return ret;
> > }
> >
> > -static int _dpu_rm_populate_requirements(
> > - struct drm_encoder *enc,
> > - struct dpu_rm_requirements *reqs,
> > - struct msm_display_topology req_topology)
> > -{
> > - reqs->topology = req_topology;
> > -
> > - DRM_DEBUG_KMS("num_lm: %d num_dsc: %d num_intf: %d\n",
> > - reqs->topology.num_lm, reqs->topology.num_dsc,
> > - reqs->topology.num_intf);
> > -
> > - return 0;
> > -}
> > -
> > static void _dpu_rm_clear_mapping(uint32_t *res_mapping, int cnt,
> > uint32_t enc_id)
> > {
> > @@ -608,9 +584,8 @@ int dpu_rm_reserve(
> > struct dpu_global_state *global_state,
> > struct drm_encoder *enc,
> > struct drm_crtc_state *crtc_state,
> > - struct msm_display_topology topology)
> > + struct msm_display_topology *topology)
> > {
> > - struct dpu_rm_requirements reqs;
> > int ret;
> >
> > /* Check if this is just a page-flip */
> > @@ -625,13 +600,11 @@ int dpu_rm_reserve(
> > DRM_DEBUG_KMS("reserving hw for enc %d crtc %d\n",
> > enc->base.id, crtc_state->crtc->base.id);
> >
> > - ret = _dpu_rm_populate_requirements(enc, &reqs, topology);
> > - if (ret) {
> > - DPU_ERROR("failed to populate hw requirements\n");
> > - return ret;
> > - }
> > + DRM_DEBUG_KMS("num_lm: %d num_dsc: %d num_intf: %d\n",
> > + topology->num_lm, topology->num_dsc,
> > + topology->num_intf);
> >
> > - ret = _dpu_rm_make_reservation(rm, global_state, enc, &reqs);
> > + ret = _dpu_rm_make_reservation(rm, global_state, enc, topology);
> > if (ret)
> > DPU_ERROR("failed to reserve hw resources: %d\n", ret);
> >
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h
> > index d62c2edb2460..f05697462856 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h
> > @@ -71,7 +71,7 @@ int dpu_rm_reserve(struct dpu_rm *rm,
> > struct dpu_global_state *global_state,
> > struct drm_encoder *drm_enc,
> > struct drm_crtc_state *crtc_state,
> > - struct msm_display_topology topology);
> > + struct msm_display_topology *topology);
> >
> > /**
> > * dpu_rm_reserve - Given the encoder for the display chain, release any
--
With best wishes
Dmitry
More information about the dri-devel
mailing list