[Freedreno] [PATCH] drm/msm/dsi: simplify pixel clk rate handling
Abhinav Kumar
quic_abhinavk at quicinc.com
Fri May 19 19:36:38 UTC 2023
On 5/19/2023 12:33 PM, Dmitry Baryshkov wrote:
> On 19/05/2023 21:54, Jessica Zhang wrote:
>>
>>
>> On 3/28/2023 6:04 AM, Dmitry Baryshkov wrote:
>>> On 26/01/2023 02:07, Abhinav Kumar wrote:
>>>>
>>>>
>>>> On 1/18/2023 5:00 AM, Dmitry Baryshkov wrote:
>>>>> Move a call to dsi_calc_pclk() out of calc_clk_rate directly towards
>>>>> msm_dsi_host_get_phy_clk_req(). It is called for both 6g and v2 hosts.
>>>>>
>>>>> Also, while we are at it, replace another dsi_get_pclk_rate()
>>>>> invocation
>>>>> with using the stored value at msm_host->pixel_clk_rate.
>>>>>
>>>>> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
>>>>> ---
>>>>> drivers/gpu/drm/msm/dsi/dsi.h | 4 ++--
>>>>> drivers/gpu/drm/msm/dsi/dsi_cfg.h | 2 +-
>>>>> drivers/gpu/drm/msm/dsi/dsi_host.c | 24 ++++++++++++------------
>>>>> 3 files changed, 15 insertions(+), 15 deletions(-)
>>>>>
>>>>> diff --git a/drivers/gpu/drm/msm/dsi/dsi.h
>>>>> b/drivers/gpu/drm/msm/dsi/dsi.h
>>>>> index bd3763a5d723..93ec54478eb6 100644
>>>>> --- a/drivers/gpu/drm/msm/dsi/dsi.h
>>>>> +++ b/drivers/gpu/drm/msm/dsi/dsi.h
>>>>> @@ -129,8 +129,8 @@ int dsi_dma_base_get_6g(struct msm_dsi_host
>>>>> *msm_host, uint64_t *iova);
>>>>> int dsi_dma_base_get_v2(struct msm_dsi_host *msm_host, uint64_t
>>>>> *iova);
>>>>> int dsi_clk_init_v2(struct msm_dsi_host *msm_host);
>>>>> int dsi_clk_init_6g_v2(struct msm_dsi_host *msm_host);
>>>>> -int dsi_calc_clk_rate_v2(struct msm_dsi_host *msm_host, bool
>>>>> is_bonded_dsi);
>>>>> -int dsi_calc_clk_rate_6g(struct msm_dsi_host *msm_host, bool
>>>>> is_bonded_dsi);
>>>>> +int dsi_calc_clk_rate_v2(struct msm_dsi_host *msm_host);
>>>>> +int dsi_calc_clk_rate_6g(struct msm_dsi_host *msm_host);
>>>>> void msm_dsi_host_snapshot(struct msm_disp_state *disp_state,
>>>>> struct mipi_dsi_host *host);
>>>>> void msm_dsi_host_test_pattern_en(struct mipi_dsi_host *host);
>>>>> struct drm_dsc_config *msm_dsi_host_get_dsc_config(struct
>>>>> mipi_dsi_host *host);
>>>>> diff --git a/drivers/gpu/drm/msm/dsi/dsi_cfg.h
>>>>> b/drivers/gpu/drm/msm/dsi/dsi_cfg.h
>>>>> index 44be4a88aa83..5106e66846c3 100644
>>>>> --- a/drivers/gpu/drm/msm/dsi/dsi_cfg.h
>>>>> +++ b/drivers/gpu/drm/msm/dsi/dsi_cfg.h
>>>>> @@ -51,7 +51,7 @@ struct msm_dsi_host_cfg_ops {
>>>>> void* (*tx_buf_get)(struct msm_dsi_host *msm_host);
>>>>> void (*tx_buf_put)(struct msm_dsi_host *msm_host);
>>>>> int (*dma_base_get)(struct msm_dsi_host *msm_host, uint64_t
>>>>> *iova);
>>>>> - int (*calc_clk_rate)(struct msm_dsi_host *msm_host, bool
>>>>> is_bonded_dsi);
>>>>> + int (*calc_clk_rate)(struct msm_dsi_host *msm_host);
>>>>> };
>>>>> struct msm_dsi_cfg_handler {
>>>>> diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c
>>>>> b/drivers/gpu/drm/msm/dsi/dsi_host.c
>>>>> index 18fa30e1e858..7d99a108bff6 100644
>>>>> --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
>>>>> +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
>>>>> @@ -616,28 +616,21 @@ static void dsi_calc_pclk(struct msm_dsi_host
>>>>> *msm_host, bool is_bonded_dsi)
>>>>> }
>>>>> -int dsi_calc_clk_rate_6g(struct msm_dsi_host *msm_host, bool
>>>>> is_bonded_dsi)
>>>>> +int dsi_calc_clk_rate_6g(struct msm_dsi_host *msm_host)
>>>>> {
>>>>> - if (!msm_host->mode) {
>>>>> - pr_err("%s: mode not set\n", __func__);
>>>>> - return -EINVAL;
>>>>> - }
>>>>> -
>>>>> - dsi_calc_pclk(msm_host, is_bonded_dsi);
>>>>> msm_host->esc_clk_rate = clk_get_rate(msm_host->esc_clk);
>>>>> +
>>>>> return 0;
>>>>> }
>>>>> -int dsi_calc_clk_rate_v2(struct msm_dsi_host *msm_host, bool
>>>>> is_bonded_dsi)
>>>>> +int dsi_calc_clk_rate_v2(struct msm_dsi_host *msm_host)
>>>>> {
>>>>> u32 bpp = dsi_get_bpp(msm_host->format);
>>>>> u64 pclk_bpp;
>>>>> unsigned int esc_mhz, esc_div;
>>>>> unsigned long byte_mhz;
>>>>> - dsi_calc_pclk(msm_host, is_bonded_dsi);
>>>>> -
>>>>> - pclk_bpp = (u64)dsi_get_pclk_rate(msm_host->mode,
>>>>> is_bonded_dsi) * bpp;
>>>>> + pclk_bpp = msm_host->pixel_clk_rate * bpp;
>>>>> do_div(pclk_bpp, 8);
>>>>> msm_host->src_clk_rate = pclk_bpp;
>>>>> @@ -2292,7 +2285,14 @@ void msm_dsi_host_get_phy_clk_req(struct
>>>>> mipi_dsi_host *host,
>>>>> const struct msm_dsi_cfg_handler *cfg_hnd = msm_host->cfg_hnd;
>>>>> int ret;
>>>>> - ret = cfg_hnd->ops->calc_clk_rate(msm_host, is_bonded_dsi);
>>>>> + if (!msm_host->mode) {
>>>>> + pr_err("%s: mode not set\n", __func__);
>>>>> + return;
>>>>> + }
>>>>> +
>>>>> + dsi_calc_pclk(msm_host, is_bonded_dsi);
>>>>> +
>>>>> + ret = cfg_hnd->ops->calc_clk_rate(msm_host);
>>>>
>>>> I am not too sure what we are gaining by this.
>>>>
>>>> Its not that we are replacing dsi_get_pclk_rate().
>>>>
>>>> We are moving the dsi_get_pclk_rate() from the calc_clk_rate() to
>>>> the msm_dsi_host_get_phy_clk_req().
>>>>
>>>> Also, with this change, dsi_calc_clk_rate_6g() looks kind of empty
>>>> to stand on its own.
>>>>
>>>> The original intention of the calc_clk_rate() op seems to be
>>>> calculate and store all the clocks (byte, pixel and esc).
>>>>
>>>> Why change that behavior by breaking it up?
>>>
>>> Unification between platforms. Both v2 and 6g platforms call
>>> dsi_calc_pclk(). Let's just move it to a common code path.
>>
>> Hi Dmitry,
>>
>> I think what Abhinav means here is that the meaning and functionality
>> of calc_clk_rate() changes with this patch.
>>
>> Before, calc_clk_rate() does *all* the clk_rate calculations and
>> assignments. But after this change, it will only calculate and assign
>> the escape clk rate.
>>
>> I agree with Abhinav that this change renders the calc_clk_rate() op
>> misleading as it will not calculate all of the clock rates anymore.
>
> Would it make sense if I rename it to calc_other_clock_rates()?
>
Not really. I would rather still have it separate and drop this patch.
So even if pixel clock calculation looks common today between v2 and 6g,
lets say tomorrow there is a 7g or 8g which needs some other math there,
I think this is the right place where it should stay so that we
calculate all clocks together.
> Moving pclk calculation to the core code emphasises that pclk
> calculation is common between v2 and 6g hosts.
>
>>
>> Thanks,
>>
>> Jessica Zhang
>>
>>>
>>>>
>>>>> if (ret) {
>>>>> pr_err("%s: unable to calc clk rate, %d\n", __func__, ret);
>>>>> return;
>>>
>>> --
>>> With best wishes
>>> Dmitry
>>>
>
More information about the dri-devel
mailing list