[PATCH 0/6] drm/msm/dpu: rework interrupt handling

[Dmitry Baryshkov]

Declaring the mask of supported interrupts proved to be error-prone. It
is very easy to add a bit with no corresponding backing block or to miss
the INTF TE bit. Replace this static configuration with the irq mask
calculated from the HW catalog data.

Dmitry Baryshkov (6):
  drm/msm/dpu: don't set DPU_INTF_TE globally
  drm/msm/dpu: inline __intr_offset
  drm/msm/dpu: split interrupt address arrays
  drm/msm/dpu: autodetect supported interrupts
  drm/msm/dpu: drop now-unused mdss_irqs field from hw catalog
  drm/msm/dpu: drop compatibility INTR defines

 .../msm/disp/dpu1/catalog/dpu_3_0_msm8998.h   |   8 --
 .../msm/disp/dpu1/catalog/dpu_4_0_sdm845.h    |   9 --
 .../msm/disp/dpu1/catalog/dpu_5_0_sm8150.h    |  11 --
 .../msm/disp/dpu1/catalog/dpu_5_1_sc8180x.h   |  13 ---
 .../msm/disp/dpu1/catalog/dpu_6_0_sm8250.h    |  10 --
 .../msm/disp/dpu1/catalog/dpu_6_2_sc7180.h    |   6 -
 .../msm/disp/dpu1/catalog/dpu_6_3_sm6115.h    |   5 -
 .../msm/disp/dpu1/catalog/dpu_6_5_qcm2290.h   |   5 -
 .../msm/disp/dpu1/catalog/dpu_7_0_sm8350.h    |  13 +--
 .../msm/disp/dpu1/catalog/dpu_7_2_sc7280.h    |   9 +-
 .../msm/disp/dpu1/catalog/dpu_8_0_sc8280xp.h  |  18 +--
 .../msm/disp/dpu1/catalog/dpu_8_1_sm8450.h    |  13 +--
 .../msm/disp/dpu1/catalog/dpu_9_0_sm8550.h    |  13 +--
 .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c    |   3 +-
 .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h    |   5 +-
 .../gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c | 110 ++++++++++++------
 .../gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h |  21 ++--
 17 files changed, 97 insertions(+), 175 deletions(-)

-- 
2.39.2