[PATCH RFC 03/10] drm/panel: Add LGD panel driver for Sony Xperia XZ3
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Mon May 22 01:16:20 UTC 2023
On 22/05/2023 00:23, Marijn Suijten wrote:
> Sony provides an unlabeled LGD + Atmel maXTouch assembly in its Xperia
> XZ3 (tama akatsuki) phone, with custom DCS commands to match.
>
> This panel features Display Stream Compression 1.1.
>
> Signed-off-by: Marijn Suijten <marijn.suijten at somainline.org>
> ---
> drivers/gpu/drm/panel/Kconfig | 11 +
> drivers/gpu/drm/panel/Makefile | 1 +
> drivers/gpu/drm/panel/panel-sony-akatsuki-lgd.c | 362 ++++++++++++++++++++++++
> 3 files changed, 374 insertions(+)
>
> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> index 67ef898d133f2..18bd116e78a71 100644
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -706,6 +706,17 @@ config DRM_PANEL_SONY_ACX565AKM
> Say Y here if you want to enable support for the Sony ACX565AKM
> 800x600 3.5" panel (found on the Nokia N900).
>
> +config DRM_PANEL_SONY_AKATSUKI_LGD
> + tristate "Sony Xperia XZ3 LGD panel"
> + depends on GPIOLIB && OF
> + depends on DRM_MIPI_DSI
> + depends on BACKLIGHT_CLASS_DEVICE
> + help
> + Say Y here if you want to enable support for the Sony Xperia XZ3
> + 1440x2880 at 60 6.0" OLED DSI cmd mode panel produced by LG Display.
> +
> + This panel uses Display Stream Compression 1.1.
> +
> config DRM_PANEL_SONY_TD4353_JDI
> tristate "Sony TD4353 JDI panel"
> depends on GPIOLIB && OF
> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> index ff169781e82d7..85133f73558f3 100644
> --- a/drivers/gpu/drm/panel/Makefile
> +++ b/drivers/gpu/drm/panel/Makefile
> @@ -71,6 +71,7 @@ obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7701) += panel-sitronix-st7701.o
> obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7703) += panel-sitronix-st7703.o
> obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o
> obj-$(CONFIG_DRM_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
> +obj-$(CONFIG_DRM_PANEL_SONY_AKATSUKI_LGD) += panel-sony-akatsuki-lgd.o
> obj-$(CONFIG_DRM_PANEL_SONY_TD4353_JDI) += panel-sony-td4353-jdi.o
> obj-$(CONFIG_DRM_PANEL_SONY_TULIP_TRULY_NT35521) += panel-sony-tulip-truly-nt35521.o
> obj-$(CONFIG_DRM_PANEL_TDO_TL070WSH30) += panel-tdo-tl070wsh30.o
> diff --git a/drivers/gpu/drm/panel/panel-sony-akatsuki-lgd.c b/drivers/gpu/drm/panel/panel-sony-akatsuki-lgd.c
> new file mode 100644
> index 0000000000000..f55788f963dab
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-sony-akatsuki-lgd.c
> @@ -0,0 +1,362 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2023 Marijn Suijten <marijn.suijten at somainline.org>
> + *
> + * Based on Sony Downstream's "Atmel LGD ID5" Akatsuki panel dtsi.
> + */
> +
> +#include <linux/backlight.h>
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/regulator/consumer.h>
> +
> +#include <video/mipi_display.h>
> +
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_modes.h>
> +#include <drm/drm_panel.h>
> +#include <drm/drm_probe_helper.h>
> +#include <drm/display/drm_dsc.h>
> +#include <drm/display/drm_dsc_helper.h>
> +
> +struct sony_akatsuki_lgd {
> + struct drm_panel panel;
> + struct mipi_dsi_device *dsi;
> + struct regulator *vddio;
> + struct gpio_desc *reset_gpio;
> + bool prepared;
> +};
> +
> +static inline struct sony_akatsuki_lgd *to_sony_akatsuki_lgd(struct drm_panel *panel)
> +{
> + return container_of(panel, struct sony_akatsuki_lgd, panel);
> +}
> +
> +static int sony_akatsuki_lgd_on(struct sony_akatsuki_lgd *ctx)
> +{
> + struct mipi_dsi_device *dsi = ctx->dsi;
> + struct device *dev = &dsi->dev;
> + int ret;
> +
> + dsi->mode_flags |= MIPI_DSI_MODE_LPM;
> +
> + mipi_dsi_dcs_write_seq(dsi, 0x7f, 0x5a, 0x5a);
> + mipi_dsi_dcs_write_seq(dsi, 0xf0, 0x5a, 0x5a);
> + mipi_dsi_dcs_write_seq(dsi, 0xf1, 0x5a, 0x5a);
> + mipi_dsi_dcs_write_seq(dsi, 0xf2, 0x5a, 0x5a);
> + mipi_dsi_dcs_write_seq(dsi, 0x02, 0x01);
> + mipi_dsi_dcs_write_seq(dsi, 0x59, 0x01);
> + /* Enable backlight control */
> + mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY, BIT(5));
> + mipi_dsi_dcs_write_seq(dsi, 0x57, 0x20, 0x80, 0xde, 0x60, 0x00);
> +
> + ret = mipi_dsi_dcs_set_column_address(dsi, 0, 1440 - 1);
> + if (ret < 0) {
> + dev_err(dev, "Failed to set column address: %d\n", ret);
> + return ret;
> + }
> +
> + ret = mipi_dsi_dcs_set_page_address(dsi, 0, 2880 - 1);
> + if (ret < 0) {
> + dev_err(dev, "Failed to set page address: %d\n", ret);
> + return ret;
> + }
> +
> + mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_POWER_SAVE, 0x00);
> +
> + ret = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
> + if (ret < 0) {
> + dev_err(dev, "Failed to set tear on: %d\n", ret);
> + return ret;
> + }
> +
> + mipi_dsi_dcs_write_seq(dsi, 0x7f, 0x5a, 0x5a);
> + mipi_dsi_dcs_write_seq(dsi, 0xf0, 0x5a, 0x5a);
> + mipi_dsi_dcs_write_seq(dsi, 0xf1, 0x5a, 0x5a);
> + mipi_dsi_dcs_write_seq(dsi, 0xf2, 0x5a, 0x5a);
> + mipi_dsi_dcs_write_seq(dsi, 0xb0, 0x03);
> + mipi_dsi_dcs_write_seq(dsi, 0xf6, 0x04);
> + mipi_dsi_dcs_write_seq(dsi, 0xb0, 0x05);
> + mipi_dsi_dcs_write_seq(dsi, 0xf6, 0x01, 0x7f, 0x00);
> +
> + ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
> + if (ret < 0) {
> + dev_err(dev, "Failed to exit sleep mode: %d\n", ret);
> + return ret;
> + }
> + msleep(120);
> +
> + mipi_dsi_dcs_write_seq(dsi, 0xe3, 0xac, 0x19, 0x34, 0x14, 0x7d);
> +
> + ret = mipi_dsi_dcs_set_display_on(dsi);
> + if (ret < 0) {
> + dev_err(dev, "Failed to turn display on: %d\n", ret);
> + return ret;
> + }
My usual question: should the mipi_dsi_dcs_exit_sleep_mode() /
mipi_dsi_dcs_set_display_on() be moved from prepare() to enable() part?
> +
> + return 0;
> +}
> +
> +static int sony_akatsuki_lgd_off(struct sony_akatsuki_lgd *ctx)
> +{
> + struct mipi_dsi_device *dsi = ctx->dsi;
> + struct device *dev = &dsi->dev;
> + int ret;
> +
> + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
> +
> + ret = mipi_dsi_dcs_set_display_off(dsi);
> + if (ret < 0) {
> + dev_err(dev, "Failed to turn display off: %d\n", ret);
> + return ret;
> + }
> + msleep(20);
> +
> + ret = mipi_dsi_dcs_set_tear_off(dsi);
> + if (ret < 0) {
> + dev_err(dev, "Failed to set tear off: %d\n", ret);
> + return ret;
> + }
> +
> + ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
> + if (ret < 0) {
> + dev_err(dev, "Failed to enter sleep mode: %d\n", ret);
> + return ret;
> + }
> + msleep(100);
> +
> + return 0;
> +}
> +
> +static int sony_akatsuki_lgd_prepare(struct drm_panel *panel)
> +{
> + struct sony_akatsuki_lgd *ctx = to_sony_akatsuki_lgd(panel);
> + struct drm_dsc_picture_parameter_set pps;
> + struct device *dev = &ctx->dsi->dev;
> + int ret;
> +
> + if (ctx->prepared)
> + return 0;
> +
> + ret = regulator_enable(ctx->vddio);
> + if (ret < 0) {
> + dev_err(dev, "Failed to enable vddio regulator: %d\n", ret);
> + return ret;
> + }
> +
> + msleep(100);
> +
> + gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> + usleep_range(5000, 5100);
> +
> + ret = sony_akatsuki_lgd_on(ctx);
> + if (ret < 0) {
> + dev_err(dev, "Failed to power on panel: %d\n", ret);
> + goto fail;
> + }
> +
> + if (ctx->dsi->dsc) {
dsi->dsc is always set, thus this condition can be dropped.
> + drm_dsc_pps_payload_pack(&pps, ctx->dsi->dsc);
> +
> + ret = mipi_dsi_picture_parameter_set(ctx->dsi, &pps);
> + if (ret < 0) {
> + dev_err(panel->dev, "failed to transmit PPS: %d\n", ret);
> + goto fail;
> + }
> + ret = mipi_dsi_compression_mode(ctx->dsi, true);
> + if (ret < 0) {
> + dev_err(dev, "failed to enable compression mode: %d\n", ret);
> + goto fail;
> + }
> +
> + msleep(28);
> + }
> +
> + ctx->prepared = true;
> + return 0;
> +
> +fail:
> + gpiod_set_value_cansleep(ctx->reset_gpio, 0);
> + regulator_disable(ctx->vddio);
> + return ret;
> +}
> +
> +static int sony_akatsuki_lgd_unprepare(struct drm_panel *panel)
> +{
> + struct sony_akatsuki_lgd *ctx = to_sony_akatsuki_lgd(panel);
> + struct device *dev = &ctx->dsi->dev;
> + int ret;
> +
> + if (!ctx->prepared)
> + return 0;
> +
> + ret = sony_akatsuki_lgd_off(ctx);
> + if (ret < 0)
> + dev_err(dev, "Failed to power off panel: %d\n", ret);
> +
> + gpiod_set_value_cansleep(ctx->reset_gpio, 0);
> + regulator_disable(ctx->vddio);
> +
> + usleep_range(5000, 5100);
> +
> + ctx->prepared = false;
> + return 0;
> +}
> +
> +static const struct drm_display_mode sony_akatsuki_lgd_mode = {
> + .clock = (1440 + 312 + 8 + 8) * (2880 + 48 + 8 + 8) * 60 / 1000,
> + .hdisplay = 1440,
> + .hsync_start = 1440 + 312,
> + .hsync_end = 1440 + 312 + 8,
> + .htotal = 1440 + 312 + 8 + 8,
> + .vdisplay = 2880,
> + .vsync_start = 2880 + 48,
> + .vsync_end = 2880 + 48 + 8,
> + .vtotal = 2880 + 48 + 8 + 8,
> + .width_mm = 68,
> + .height_mm = 136,
> +};
> +
> +static int sony_akatsuki_lgd_get_modes(struct drm_panel *panel,
> + struct drm_connector *connector)
> +{
> + return drm_connector_helper_get_modes_fixed(connector, &sony_akatsuki_lgd_mode);
> +}
> +
> +static const struct drm_panel_funcs sony_akatsuki_lgd_panel_funcs = {
> + .prepare = sony_akatsuki_lgd_prepare,
> + .unprepare = sony_akatsuki_lgd_unprepare,
> + .get_modes = sony_akatsuki_lgd_get_modes,
> +};
> +
> +static int sony_akatsuki_lgd_bl_update_status(struct backlight_device *bl)
> +{
> + struct mipi_dsi_device *dsi = bl_get_data(bl);
> + u16 brightness = backlight_get_brightness(bl);
> +
> + return mipi_dsi_dcs_set_display_brightness_large(dsi, brightness);
> +}
> +
> +static int sony_akatsuki_lgd_bl_get_brightness(struct backlight_device *bl)
> +{
> + struct mipi_dsi_device *dsi = bl_get_data(bl);
> + u16 brightness;
> + int ret;
> +
> + ret = mipi_dsi_dcs_get_display_brightness_large(dsi, &brightness);
> + if (ret < 0)
> + return ret;
> +
> + return brightness & 0x3ff;
> +}
> +
> +static const struct backlight_ops sony_akatsuki_lgd_bl_ops = {
> + .update_status = sony_akatsuki_lgd_bl_update_status,
> + .get_brightness = sony_akatsuki_lgd_bl_get_brightness,
> +};
> +
> +static int sony_akatsuki_lgd_probe(struct mipi_dsi_device *dsi)
> +{
> + const struct backlight_properties props = {
> + .type = BACKLIGHT_RAW,
> + .brightness = 100,
> + .max_brightness = 1023,
> + };
> + struct device *dev = &dsi->dev;
> + struct sony_akatsuki_lgd *ctx;
> + struct drm_dsc_config *dsc;
> + int ret;
> +
> + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
> + if (!ctx)
> + return -ENOMEM;
> +
> + ctx->vddio = devm_regulator_get(dev, "vddio");
> + if (IS_ERR(ctx->vddio))
> + return dev_err_probe(dev, PTR_ERR(ctx->vddio),
> + "Failed to get vddio\n");
> +
> + ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_ASIS);
> + if (IS_ERR(ctx->reset_gpio))
> + return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
> + "Failed to get reset-gpios\n");
> +
> + ctx->dsi = dsi;
> + mipi_dsi_set_drvdata(dsi, ctx);
> +
> + dsi->lanes = 4;
> + dsi->format = MIPI_DSI_FMT_RGB888;
> + dsi->mode_flags = MIPI_DSI_CLOCK_NON_CONTINUOUS;
> +
> + drm_panel_init(&ctx->panel, dev, &sony_akatsuki_lgd_panel_funcs,
> + DRM_MODE_CONNECTOR_DSI);
> +
> + ctx->panel.backlight = devm_backlight_device_register(dev, dev_name(dev), dev, dsi,
> + &sony_akatsuki_lgd_bl_ops, &props);
> + if (IS_ERR(ctx->panel.backlight))
> + return dev_err_probe(dev, PTR_ERR(ctx->panel.backlight),
> + "Failed to create backlight\n");
> +
> + drm_panel_add(&ctx->panel);
> +
> + /* This panel only supports DSC; unconditionally enable it */
> + dsi->dsc = dsc = devm_kzalloc(&dsi->dev, sizeof(*dsc), GFP_KERNEL);
I think double assignments are frowned upon.
> + if (!dsc)
> + return -ENOMEM;
> +
> + dsc->dsc_version_major = 1;
> + dsc->dsc_version_minor = 1;
> +
> + dsc->slice_height = 32;
> + dsc->slice_count = 2;
> + // TODO: Get hdisplay from the mode
Would you like to fix the TODO?
> + WARN_ON(1440 % dsc->slice_count);
> + dsc->slice_width = 1440 / dsc->slice_count;
> + dsc->bits_per_component = 8;
> + dsc->bits_per_pixel = 8 << 4; /* 4 fractional bits */
> + dsc->block_pred_enable = true;
> +
> + ret = mipi_dsi_attach(dsi);
> + if (ret < 0) {
> + dev_err(dev, "Failed to attach to DSI host: %d\n", ret);
> + drm_panel_remove(&ctx->panel);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static void sony_akatsuki_lgd_remove(struct mipi_dsi_device *dsi)
> +{
> + struct sony_akatsuki_lgd *ctx = mipi_dsi_get_drvdata(dsi);
> + int ret;
> +
> + ret = mipi_dsi_detach(dsi);
> + if (ret < 0)
> + dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
> +
> + drm_panel_remove(&ctx->panel);
> +}
> +
> +static const struct of_device_id sony_akatsuki_lgd_of_match[] = {
> + { .compatible = "sony,akatsuki-lgd" },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, sony_akatsuki_lgd_of_match);
> +
> +static struct mipi_dsi_driver sony_akatsuki_lgd_driver = {
> + .probe = sony_akatsuki_lgd_probe,
> + .remove = sony_akatsuki_lgd_remove,
> + .driver = {
> + .name = "panel-sony-akatsuki-lgd",
> + .of_match_table = sony_akatsuki_lgd_of_match,
> + },
> +};
> +module_mipi_dsi_driver(sony_akatsuki_lgd_driver);
> +
> +MODULE_AUTHOR("Marijn Suijten <marijn.suijten at somainline.org>");
> +MODULE_DESCRIPTION("DRM panel driver for an unnamed LGD OLED panel found in the Sony Xperia XZ3");
> +MODULE_LICENSE("GPL");
>
--
With best wishes
Dmitry
More information about the dri-devel
mailing list