[PATCH v5 2/3] drm/panel: Add Samsung S6D7AA0 panel controller driver
Neil Armstrong
neil.armstrong at linaro.org
Mon May 22 08:34:56 UTC 2023
On 19/05/2023 19:03, Artur Weber wrote:
> Initial driver for S6D7AA0-controlled panels. Currently, the following
> panels are supported:
>
> - S6D7AA0-LSL080AL02 (Samsung Galaxy Tab 3 8.0)
> - S6D7AA0-LSL080AL03 (Samsung Galaxy Tab A 8.0 2015)
> - S6D7AA0-LTL101AT01 (Samsung Galaxy Tab A 9.7 2015)
>
> It should be possible to extend this driver to work with other panels
> using this IC.
>
> Tested-by: Nikita Travkin <nikita at trvn.ru> #ltl101at01
> Signed-off-by: Artur Weber <aweber.kernel at gmail.com>
> ---
> Changed in v2:
> - Removed unused panel_name property from desc struct
> Changed in v4:
> - Added LSL080AL03 and LTL101AT01 panels
> - Added DSI-controlled backlight support for panels that support it
> - Renamed command defines: CMD_* -> MCS_*
> - Dropped s6d7aa0_bl_ctl_on (not universal across panels)
> - Dropped MIPI_DSI_MODE_LPM flag
> - Added vmipi-supply, renamed enable-supply to power-supply
> Changed in v5:
> - Changed compatible to avoid concatenating multiple model numbers
> ---
> drivers/gpu/drm/panel/Kconfig | 7 +
> drivers/gpu/drm/panel/Makefile | 1 +
> drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c | 585 ++++++++++++++++++
> 3 files changed, 593 insertions(+)
> create mode 100644 drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c
>
> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> index 2b9d6db7860b..203c0ef0bbfd 100644
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -553,6 +553,13 @@ config DRM_PANEL_SAMSUNG_S6D27A1
> This panel can be found in Samsung Galaxy Ace 2
> GT-I8160 mobile phone.
>
> +config DRM_PANEL_SAMSUNG_S6D7AA0
> + tristate "Samsung S6D7AA0 MIPI-DSI video mode panel controller"
> + depends on OF
> + depends on BACKLIGHT_CLASS_DEVICE
> + select DRM_MIPI_DSI
> + select VIDEOMODE_HELPERS
> +
> config DRM_PANEL_SAMSUNG_S6E3HA2
> tristate "Samsung S6E3HA2 DSI video mode panel"
> depends on OF
> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> index ff169781e82d..30cf553c8d1d 100644
> --- a/drivers/gpu/drm/panel/Makefile
> +++ b/drivers/gpu/drm/panel/Makefile
> @@ -54,6 +54,7 @@ obj-$(CONFIG_DRM_PANEL_SAMSUNG_DB7430) += panel-samsung-db7430.o
> obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += panel-samsung-ld9040.o
> obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6D16D0) += panel-samsung-s6d16d0.o
> obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6D27A1) += panel-samsung-s6d27a1.o
> +obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6D7AA0) += panel-samsung-s6d7aa0.o
> obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2) += panel-samsung-s6e3ha2.o
> obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03) += panel-samsung-s6e63j0x03.o
> obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E63M0) += panel-samsung-s6e63m0.o
> diff --git a/drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c b/drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c
> new file mode 100644
> index 000000000000..f532aa018428
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c
> @@ -0,0 +1,585 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Samsung S6D7AA0 MIPI-DSI TFT LCD controller drm_panel driver.
> + *
> + * Copyright (C) 2022 Artur Weber <aweber.kernel at gmail.com>
> + */
> +
> +#include <linux/backlight.h>
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/module.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +
> +#include <video/mipi_display.h>
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_modes.h>
> +#include <drm/drm_panel.h>
> +
> +/* Manufacturer command set */
> +#define MCS_BL_CTL 0xc3
> +#define MCS_OTP_RELOAD 0xd0
> +#define MCS_PASSWD1 0xf0
> +#define MCS_PASSWD2 0xf1
> +#define MCS_PASSWD3 0xfc
> +
> +struct s6d7aa0 {
> + struct drm_panel panel;
> + struct mipi_dsi_device *dsi;
> + struct gpio_desc *reset_gpio;
> + struct regulator_bulk_data supplies[2];
> + const struct s6d7aa0_panel_desc *desc;
> +};
> +
> +struct s6d7aa0_panel_desc {
> + unsigned int panel_type;
> + int (*init_func)(struct s6d7aa0 *ctx);
> + int (*off_func)(struct s6d7aa0 *ctx);
> + const struct drm_display_mode drm_mode;
> + unsigned long mode_flags;
> + u32 bus_flags;
> + bool has_backlight;
> + bool use_passwd3;
> +};
> +
> +enum s6d7aa0_panels {
> + S6D7AA0_PANEL_LSL080AL02,
> + S6D7AA0_PANEL_LSL080AL03,
> + S6D7AA0_PANEL_LTL101AT01,
> +};
> +
> +static inline struct s6d7aa0 *panel_to_s6d7aa0(struct drm_panel *panel)
> +{
> + return container_of(panel, struct s6d7aa0, panel);
> +}
> +
> +static void s6d7aa0_reset(struct s6d7aa0 *ctx)
> +{
> + gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> + msleep(50);
> + gpiod_set_value_cansleep(ctx->reset_gpio, 0);
> + msleep(50);
> +}
> +
> +static int s6d7aa0_lock(struct s6d7aa0 *ctx, bool lock)
> +{
> + struct mipi_dsi_device *dsi = ctx->dsi;
> + int ret = 0;
> +
> + if (lock) {
> + mipi_dsi_dcs_write_seq(dsi, MCS_PASSWD1, 0xa5, 0xa5);
> + mipi_dsi_dcs_write_seq(dsi, MCS_PASSWD2, 0xa5, 0xa5);
> + if (ctx->desc->use_passwd3)
> + mipi_dsi_dcs_write_seq(dsi, MCS_PASSWD3, 0x5a, 0x5a);
> + } else {
> + mipi_dsi_dcs_write_seq(dsi, MCS_PASSWD1, 0x5a, 0x5a);
> + mipi_dsi_dcs_write_seq(dsi, MCS_PASSWD2, 0x5a, 0x5a);
> + if (ctx->desc->use_passwd3)
> + mipi_dsi_dcs_write_seq(dsi, MCS_PASSWD3, 0xa5, 0xa5);
> + }
> +
> + return ret;
> +}
> +
> +static int s6d7aa0_on(struct s6d7aa0 *ctx)
> +{
> + struct mipi_dsi_device *dsi = ctx->dsi;
> + struct device *dev = &dsi->dev;
> + int ret;
> +
> + ret = ctx->desc->init_func(ctx);
> + if (ret < 0) {
> + dev_err(dev, "Failed to initialize panel: %d\n", ret);
> + gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> + return ret;
> + }
> +
> + ret = mipi_dsi_dcs_set_display_on(dsi);
> + if (ret < 0) {
> + dev_err(dev, "Failed to set display on: %d\n", ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int s6d7aa0_off(struct s6d7aa0 *ctx)
> +{
> + struct mipi_dsi_device *dsi = ctx->dsi;
> + struct device *dev = &dsi->dev;
> + int ret;
> +
> + ret = ctx->desc->off_func(ctx);
> + if (ret < 0) {
> + dev_err(dev, "Panel-specific off function failed: %d\n", ret);
> + return ret;
> + }
> +
> + ret = mipi_dsi_dcs_set_display_off(dsi);
> + if (ret < 0) {
> + dev_err(dev, "Failed to set display off: %d\n", ret);
> + return ret;
> + }
> + msleep(64);
> +
> + ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
> + if (ret < 0) {
> + dev_err(dev, "Failed to enter sleep mode: %d\n", ret);
> + return ret;
> + }
> + msleep(120);
> +
> + return 0;
> +}
> +
> +static int s6d7aa0_prepare(struct drm_panel *panel)
> +{
> + struct s6d7aa0 *ctx = panel_to_s6d7aa0(panel);
> + struct device *dev = &ctx->dsi->dev;
> + int ret;
> +
> + ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
> + if (ret < 0) {
> + dev_err(dev, "Failed to enable regulators: %d\n", ret);
> + return ret;
> + }
> +
> + s6d7aa0_reset(ctx);
> +
> + ret = s6d7aa0_on(ctx);
> + if (ret < 0) {
> + dev_err(dev, "Failed to initialize panel: %d\n", ret);
> + gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int s6d7aa0_disable(struct drm_panel *panel)
> +{
> + struct s6d7aa0 *ctx = panel_to_s6d7aa0(panel);
> + struct device *dev = &ctx->dsi->dev;
> + int ret;
> +
> + ret = s6d7aa0_off(ctx);
> + if (ret < 0)
> + dev_err(dev, "Failed to un-initialize panel: %d\n", ret);
> +
> + return 0;
> +}
> +
> +static int s6d7aa0_unprepare(struct drm_panel *panel)
> +{
> + struct s6d7aa0 *ctx = panel_to_s6d7aa0(panel);
> +
> + gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> + regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
> +
> + return 0;
> +}
> +
> +/* Backlight control code */
> +
> +static int s6d7aa0_bl_update_status(struct backlight_device *bl)
> +{
> + struct mipi_dsi_device *dsi = bl_get_data(bl);
> + u16 brightness = backlight_get_brightness(bl);
> + int ret;
> +
> + ret = mipi_dsi_dcs_set_display_brightness(dsi, brightness);
> + if (ret < 0)
> + return ret;
> +
> + return 0;
> +}
> +
> +static int s6d7aa0_bl_get_brightness(struct backlight_device *bl)
> +{
> + struct mipi_dsi_device *dsi = bl_get_data(bl);
> + u16 brightness;
> + int ret;
> +
> + ret = mipi_dsi_dcs_get_display_brightness(dsi, &brightness);
> + if (ret < 0)
> + return ret;
> +
> + return brightness & 0xff;
> +}
> +
> +static const struct backlight_ops s6d7aa0_bl_ops = {
> + .update_status = s6d7aa0_bl_update_status,
> + .get_brightness = s6d7aa0_bl_get_brightness,
> +};
> +
> +static struct backlight_device *
> +s6d7aa0_create_backlight(struct mipi_dsi_device *dsi)
> +{
> + struct device *dev = &dsi->dev;
> + const struct backlight_properties props = {
> + .type = BACKLIGHT_RAW,
> + .brightness = 255,
> + .max_brightness = 255,
> + };
> +
> + return devm_backlight_device_register(dev, dev_name(dev), dev, dsi,
> + &s6d7aa0_bl_ops, &props);
> +}
> +
> +/* Initialization code and structures for LSL080AL02 panel */
> +
> +static int s6d7aa0_lsl080al02_init(struct s6d7aa0 *ctx)
> +{
> + struct mipi_dsi_device *dsi = ctx->dsi;
> + struct device *dev = &dsi->dev;
> + int ret;
> +
> + usleep_range(20000, 25000);
> +
> + ret = s6d7aa0_lock(ctx, false);
> + if (ret < 0) {
> + dev_err(dev, "Failed to unlock registers: %d\n", ret);
> + return ret;
> + }
> +
> + mipi_dsi_dcs_write_seq(dsi, MCS_OTP_RELOAD, 0x00, 0x10);
> + usleep_range(1000, 1500);
> +
> + /* SEQ_B6_PARAM_8_R01 */
> + mipi_dsi_dcs_write_seq(dsi, 0xb6, 0x10);
> +
> + /* BL_CTL_ON */
> + mipi_dsi_dcs_write_seq(dsi, MCS_BL_CTL, 0x40, 0x00, 0x28);
> +
> + usleep_range(5000, 6000);
> +
> + mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_SET_ADDRESS_MODE, 0x04);
> +
> + ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
> + if (ret < 0) {
> + dev_err(dev, "Failed to exit sleep mode: %d\n", ret);
> + return ret;
> + }
> +
> + msleep(120);
> + mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_SET_ADDRESS_MODE, 0x00);
> +
> + ret = s6d7aa0_lock(ctx, true);
> + if (ret < 0) {
> + dev_err(dev, "Failed to lock registers: %d\n", ret);
> + return ret;
> + }
> +
> + ret = mipi_dsi_dcs_set_display_on(dsi);
> + if (ret < 0) {
> + dev_err(dev, "Failed to set display on: %d\n", ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int s6d7aa0_lsl080al02_off(struct s6d7aa0 *ctx)
> +{
> + struct mipi_dsi_device *dsi = ctx->dsi;
> +
> + /* BL_CTL_OFF */
> + mipi_dsi_dcs_write_seq(dsi, MCS_BL_CTL, 0x40, 0x00, 0x20);
> +
> + return 0;
> +}
> +
> +static const struct drm_display_mode s6d7aa0_lsl080al02_mode = {
> + .clock = (800 + 16 + 4 + 140) * (1280 + 8 + 4 + 4) * 60 / 1000,
> + .hdisplay = 800,
> + .hsync_start = 800 + 16,
> + .hsync_end = 800 + 16 + 4,
> + .htotal = 800 + 16 + 4 + 140,
> + .vdisplay = 1280,
> + .vsync_start = 1280 + 8,
> + .vsync_end = 1280 + 8 + 4,
> + .vtotal = 1280 + 8 + 4 + 4,
> + .width_mm = 108,
> + .height_mm = 173,
> +};
> +
> +static const struct s6d7aa0_panel_desc s6d7aa0_lsl080al02_desc = {
> + .panel_type = S6D7AA0_PANEL_LSL080AL02,
> + .init_func = s6d7aa0_lsl080al02_init,
> + .off_func = s6d7aa0_lsl080al02_off,
> + .drm_mode = s6d7aa0_lsl080al02_mode,
> + .mode_flags = MIPI_DSI_MODE_VSYNC_FLUSH | MIPI_DSI_MODE_VIDEO_NO_HFP,
> + .bus_flags = DRM_BUS_FLAG_DE_HIGH,
> +
> + .has_backlight = false,
> + .use_passwd3 = false,
> +};
> +
> +/* Initialization code and structures for LSL080AL03 panel */
> +
> +static int s6d7aa0_lsl080al03_init(struct s6d7aa0 *ctx)
> +{
> + struct mipi_dsi_device *dsi = ctx->dsi;
> + struct device *dev = &dsi->dev;
> + int ret;
> +
> + usleep_range(20000, 25000);
> +
> + ret = s6d7aa0_lock(ctx, false);
> + if (ret < 0) {
> + dev_err(dev, "Failed to unlock registers: %d\n", ret);
> + return ret;
> + }
> +
> + if (ctx->desc->panel_type == S6D7AA0_PANEL_LSL080AL03) {
> + mipi_dsi_dcs_write_seq(dsi, MCS_BL_CTL, 0xc7, 0x00, 0x29);
> + mipi_dsi_dcs_write_seq(dsi, 0xbc, 0x01, 0x4e, 0xa0);
> + mipi_dsi_dcs_write_seq(dsi, 0xfd, 0x16, 0x10, 0x11, 0x23,
> + 0x09);
> + mipi_dsi_dcs_write_seq(dsi, 0xfe, 0x00, 0x02, 0x03, 0x21,
> + 0x80, 0x78);
> + } else if (ctx->desc->panel_type == S6D7AA0_PANEL_LTL101AT01) {
> + mipi_dsi_dcs_write_seq(dsi, MCS_BL_CTL, 0x40, 0x00, 0x08);
> + mipi_dsi_dcs_write_seq(dsi, 0xbc, 0x01, 0x4e, 0x0b);
> + mipi_dsi_dcs_write_seq(dsi, 0xfd, 0x16, 0x10, 0x11, 0x23,
> + 0x09);
> + mipi_dsi_dcs_write_seq(dsi, 0xfe, 0x00, 0x02, 0x03, 0x21,
> + 0x80, 0x68);
> + }
> +
> + mipi_dsi_dcs_write_seq(dsi, 0xb3, 0x51);
> + mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x24);
> + mipi_dsi_dcs_write_seq(dsi, 0xf2, 0x02, 0x08, 0x08);
> +
> + usleep_range(10000, 11000);
> +
> + mipi_dsi_dcs_write_seq(dsi, 0xc0, 0x80, 0x80, 0x30);
> + mipi_dsi_dcs_write_seq(dsi, 0xcd,
> + 0x2e, 0x2e, 0x2e, 0x2e, 0x2e, 0x2e, 0x2e, 0x2e,
> + 0x2e, 0x2e, 0x2e, 0x2e, 0x2e);
> + mipi_dsi_dcs_write_seq(dsi, 0xce,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00);
> + mipi_dsi_dcs_write_seq(dsi, 0xc1, 0x03);
> +
> + ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
> + if (ret < 0) {
> + dev_err(dev, "Failed to exit sleep mode: %d\n", ret);
> + return ret;
> + }
> +
> + ret = s6d7aa0_lock(ctx, true);
> + if (ret < 0) {
> + dev_err(dev, "Failed to lock registers: %d\n", ret);
> + return ret;
> + }
> +
> + ret = mipi_dsi_dcs_set_display_on(dsi);
> + if (ret < 0) {
> + dev_err(dev, "Failed to set display on: %d\n", ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int s6d7aa0_lsl080al03_off(struct s6d7aa0 *ctx)
> +{
> + struct mipi_dsi_device *dsi = ctx->dsi;
> +
> + mipi_dsi_dcs_write_seq(dsi, 0x22, 0x00);
> +
> + return 0;
> +}
> +
> +static const struct drm_display_mode s6d7aa0_lsl080al03_mode = {
> + .clock = (768 + 18 + 16 + 126) * (1024 + 8 + 2 + 6) * 60 / 1000,
> + .hdisplay = 768,
> + .hsync_start = 768 + 18,
> + .hsync_end = 768 + 18 + 16,
> + .htotal = 768 + 18 + 16 + 126,
> + .vdisplay = 1024,
> + .vsync_start = 1024 + 8,
> + .vsync_end = 1024 + 8 + 2,
> + .vtotal = 1024 + 8 + 2 + 6,
> + .width_mm = 122,
> + .height_mm = 163,
> +};
> +
> +static const struct s6d7aa0_panel_desc s6d7aa0_lsl080al03_desc = {
> + .panel_type = S6D7AA0_PANEL_LSL080AL03,
> + .init_func = s6d7aa0_lsl080al03_init,
> + .off_func = s6d7aa0_lsl080al03_off,
> + .drm_mode = s6d7aa0_lsl080al03_mode,
> + .mode_flags = MIPI_DSI_MODE_NO_EOT_PACKET,
> + .bus_flags = 0,
> +
> + .has_backlight = true,
> + .use_passwd3 = true,
> +};
> +
> +/* Initialization structures for LTL101AT01 panel */
> +
> +static const struct drm_display_mode s6d7aa0_ltl101at01_mode = {
> + .clock = (768 + 96 + 16 + 184) * (1024 + 8 + 2 + 6) * 60 / 1000,
> + .hdisplay = 768,
> + .hsync_start = 768 + 96,
> + .hsync_end = 768 + 96 + 16,
> + .htotal = 768 + 96 + 16 + 184,
> + .vdisplay = 1024,
> + .vsync_start = 1024 + 8,
> + .vsync_end = 1024 + 8 + 2,
> + .vtotal = 1024 + 8 + 2 + 6,
> + .width_mm = 148,
> + .height_mm = 197,
> +};
> +
> +static const struct s6d7aa0_panel_desc s6d7aa0_ltl101at01_desc = {
> + .panel_type = S6D7AA0_PANEL_LTL101AT01,
> + .init_func = s6d7aa0_lsl080al03_init, /* Similar init to LSL080AL03 */
> + .off_func = s6d7aa0_lsl080al03_off,
> + .drm_mode = s6d7aa0_ltl101at01_mode,
> + .mode_flags = MIPI_DSI_MODE_NO_EOT_PACKET,
> + .bus_flags = 0,
> +
> + .has_backlight = true,
> + .use_passwd3 = true,
> +};
> +
> +static int s6d7aa0_get_modes(struct drm_panel *panel,
> + struct drm_connector *connector)
> +{
> + struct drm_display_mode *mode;
> + struct s6d7aa0 *ctx;
> +
> + ctx = container_of(panel, struct s6d7aa0, panel);
> + if (!ctx)
> + return -EINVAL;
> +
> + mode = drm_mode_duplicate(connector->dev, &ctx->desc->drm_mode);
> + if (!mode)
> + return -ENOMEM;
> +
> + drm_mode_set_name(mode);
> +
> + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
> + connector->display_info.width_mm = mode->width_mm;
> + connector->display_info.height_mm = mode->height_mm;
> + connector->display_info.bus_flags = ctx->desc->bus_flags;
> + drm_mode_probed_add(connector, mode);
> +
> + return 1;
> +}
> +
> +static const struct drm_panel_funcs s6d7aa0_panel_funcs = {
> + .disable = s6d7aa0_disable,
> + .prepare = s6d7aa0_prepare,
> + .unprepare = s6d7aa0_unprepare,
> + .get_modes = s6d7aa0_get_modes,
> +};
> +
> +static int s6d7aa0_probe(struct mipi_dsi_device *dsi)
> +{
> + struct device *dev = &dsi->dev;
> + struct s6d7aa0 *ctx;
> + int ret;
> +
> + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
> + if (!ctx)
> + return -ENOMEM;
> +
> + ctx->desc = of_device_get_match_data(dev);
> + if (!ctx->desc)
> + return -ENODEV;
> +
> + ctx->supplies[0].supply = "power";
> + ctx->supplies[1].supply = "vmipi";
> + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies),
> + ctx->supplies);
> + if (ret < 0)
> + return dev_err_probe(dev, ret, "Failed to get regulators\n");
> +
> + ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
> + if (IS_ERR(ctx->reset_gpio))
> + return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
> + "Failed to get reset-gpios\n");
> +
> + ctx->dsi = dsi;
> + mipi_dsi_set_drvdata(dsi, ctx);
> +
> + dsi->lanes = 4;
> + dsi->format = MIPI_DSI_FMT_RGB888;
> + dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST
> + | ctx->desc->mode_flags;
> +
> + drm_panel_init(&ctx->panel, dev, &s6d7aa0_panel_funcs,
> + DRM_MODE_CONNECTOR_DSI);
> + ctx->panel.prepare_prev_first = true;
> +
> + ret = drm_panel_of_backlight(&ctx->panel);
> + if (ret)
> + return dev_err_probe(dev, ret, "Failed to get backlight\n");
> +
> + /* Use DSI-based backlight as fallback if available */
> + if (ctx->desc->has_backlight && !ctx->panel.backlight) {
> + ctx->panel.backlight = s6d7aa0_create_backlight(dsi);
> + if (IS_ERR(ctx->panel.backlight))
> + return dev_err_probe(dev, PTR_ERR(ctx->panel.backlight),
> + "Failed to create backlight\n");
> + }
> +
> + drm_panel_add(&ctx->panel);
> +
> + ret = mipi_dsi_attach(dsi);
> + if (ret < 0) {
> + dev_err(dev, "Failed to attach to DSI host: %d\n", ret);
> + drm_panel_remove(&ctx->panel);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static void s6d7aa0_remove(struct mipi_dsi_device *dsi)
> +{
> + struct s6d7aa0 *ctx = mipi_dsi_get_drvdata(dsi);
> + int ret;
> +
> + ret = mipi_dsi_detach(dsi);
> + if (ret < 0)
> + dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
> +
> + drm_panel_remove(&ctx->panel);
> +}
> +
> +static const struct of_device_id s6d7aa0_of_match[] = {
> + {
> + .compatible = "samsung,lsl080al02",
> + .data = &s6d7aa0_lsl080al02_desc
> + },
> + {
> + .compatible = "samsung,lsl080al03",
> + .data = &s6d7aa0_lsl080al03_desc
> + },
> + {
> + .compatible = "samsung,ltl101at01",
> + .data = &s6d7aa0_ltl101at01_desc
> + },
> + { /* sentinel */ }
> +};
> +
> +static struct mipi_dsi_driver s6d7aa0_driver = {
> + .probe = s6d7aa0_probe,
> + .remove = s6d7aa0_remove,
> + .driver = {
> + .name = "panel-samsung-s6d7aa0",
> + .of_match_table = s6d7aa0_of_match,
> + },
> +};
> +module_mipi_dsi_driver(s6d7aa0_driver);
> +
> +MODULE_AUTHOR("Artur Weber <aweber.kernel at gmail.com>");
> +MODULE_DESCRIPTION("Samsung S6D7AA0 MIPI-DSI LCD controller driver");
> +MODULE_LICENSE("GPL");
Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>
More information about the dri-devel
mailing list