[PATCH v4] drm/msm/dp: enable HDP plugin/unplugged interrupts at hpd_enable/disable

[Dmitry Baryshkov]

On 23/05/2023 15:35, Bjorn Andersson wrote:
> On Mon, May 22, 2023 at 04:02:45PM -0700, Kuogee Hsieh wrote:
>> The internal_hpd flag is set to true by dp_bridge_hpd_enable() and set to
>> false by dp_bridge_hpd_disable() to handle GPIO pinmuxed into DP controller
>> case. HDP related interrupts can not be enabled until internal_hpd is set
>> to true. At current implementation dp_display_config_hpd() will initialize
>> DP host controller first followed by enabling HDP related interrupts if
>> internal_hpd was true at that time. Enable HDP related interrupts depends on
>> internal_hpd status may leave system with DP driver host is in running state
>> but without HDP related interrupts being enabled. This will prevent external
>> display from being detected. Eliminated this dependency by moving HDP related
>> interrupts enable/disable be done at dp_bridge_hpd_enable/disable() directly
>> regardless of internal_hpd status.
>>
>> Changes in V3:
>> -- dp_catalog_ctrl_hpd_enable() and dp_catalog_ctrl_hpd_disable()
>> -- rewording ocmmit text
>>
>> Changes in V4:
>> -- replace dp_display_config_hpd() with dp_display_host_start()
>> -- move enable_irq() at dp_display_host_start();
> 
> I think what Dmitry was asking for was that you remove the disable_irq()
> from dp_display_request_irq(), but perhaps I missed some argumentation
> for why that can't/shouldn't be done?
> 

Yes, I was asking to get it removed. Kuogee, is there any reason for 
keeping the enable_irq() / disable_irq() calls?

-- 
With best wishes
Dmitry