[PATCH V7 0/6] drm: bridge: samsung-dsim: Support variable clocking

[Adam Ford]

On Thu, May 18, 2023 at 8:34 PM Adam Ford <aford173 at gmail.com> wrote:
>
> On Thu, May 18, 2023 at 7:29 PM Fabio Estevam <festevam at gmail.com> wrote:
> >
> > Hi Adam,
> >
> > On Thu, May 18, 2023 at 8:06 PM Adam Ford <aford173 at gmail.com> wrote:
> > >
> > > This series fixes the blanking pack size and the PMS calculation.  It then
> > > adds support to allows the DSIM to dynamically DPHY clocks, and support
> > > non-burst mode while allowing the removal of the hard-coded clock values
> > > for the PLL for imx8m mini/nano/plus, and it allows the removal of the
> > > burst-clock device tree entry when burst-mode isn't supported by connected
> > > devices like an HDMI brige.  In that event, the HS clock is set to the
> > > value requested by the bridge chip.
> > >
> > > This has been tested on both an i.MX8M Nano and i.MX8M Plus, and should
> > > work on i.MX8M Mini as well. Marek Szyprowski has tested it on various
> > > Exynos boards.
> > >
> > > Adam Ford (5):
> > >   drm: bridge: samsung-dsim: Fix PMS Calculator on imx8m[mnp]
> > >   drm: bridge: samsung-dsim: Fetch pll-clock-frequency automatically
> > >   drm: bridge: samsung-dsim: Select GENERIC_PHY_MIPI_DPHY
> > >   drm: bridge: samsung-dsim: Dynamically configure DPHY timing
> > >   drm: bridge: samsung-dsim: Support non-burst mode
> > >
> > > Lucas Stach (1):
> > >   drm: bridge: samsung-dsim: fix blanking packet size calculation
> > >
> > >  drivers/gpu/drm/bridge/Kconfig        |   1 +
> > >  drivers/gpu/drm/bridge/samsung-dsim.c | 142 +++++++++++++++++++++-----
> > >  include/drm/bridge/samsung-dsim.h     |   4 +
> > >  3 files changed, 124 insertions(+), 23 deletions(-)
> > >
> > > V7:  Move messages indicating the optional device tree items are going
> > >      to be automatically read elsewhere was move to dev_dbg instead of
> > >      dev_info.  Cleaned up some of the comments to be a bit more clear.
> > >      Eliminated a double variable assignement accidentally introduced
> > >      in V6 when some of the items were moved from patch 6 to patch 5.
> >
> > It seems you missed addressing one previous comment from Lucas:
> >
> > "Same as with the earlier patch, this needs to be documented in the DT
> > binding by moving "samsung,burst-clock-frequency" to be a optional
> > property."
>
> Aargh!
> I can't believe I did that.
>
> Inki,
>
> Can I do a single patch to which references this one and have you
> apply them together when the time is right, or do you want me to
> resend the whole series with an additional patch at the end making the
> two device tree items optional?

Inki,

I haven't heard back from you on whether or not you want the bindings
patch to be included with me resending the series as V7 or if you're
OK with a single, stand-alone patch.
Will you let me know?  I have the patch standing by waiting for
instructions.  If you're not the right person to ask, please let me
know who the right person is.

thanks

adam
> I totally forgot, and I'm sorry.
>
> adam
>
> A