[PATCH 2/2] drm/amd/display: clean up some inconsistent indenting
Jiapeng Chong
jiapeng.chong at linux.alibaba.com
Wed May 24 08:57:09 UTC 2023
No functional modification involved.
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn321/dcn321_fpu.c:556 dcn321_update_bw_bounding_box_fpu() warn: inconsistent indenting.
Reported-by: Abaci Robot <abaci at linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5304
Signed-off-by: Jiapeng Chong <jiapeng.chong at linux.alibaba.com>
---
.../amd/display/dc/dml/dcn321/dcn321_fpu.c | 242 +++++++++---------
1 file changed, 121 insertions(+), 121 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn321/dcn321_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn321/dcn321_fpu.c
index ffd7c3c1b142..1aaff6f2d453 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn321/dcn321_fpu.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn321/dcn321_fpu.c
@@ -553,148 +553,148 @@ void dcn321_update_bw_bounding_box_fpu(struct dc *dc, struct clk_bw_params *bw_p
dc->dml.soc.dispclk_dppclk_vco_speed_mhz = dc->clk_mgr->dentist_vco_freq_khz / 1000.0;
/* Overrides Clock levelsfrom CLK Mgr table entries as reported by PM FW */
- if (dc->debug.use_legacy_soc_bb_mechanism) {
- unsigned int i = 0, j = 0, num_states = 0;
-
- unsigned int dcfclk_mhz[DC__VOLTAGE_STATES] = {0};
- unsigned int dram_speed_mts[DC__VOLTAGE_STATES] = {0};
- unsigned int optimal_uclk_for_dcfclk_sta_targets[DC__VOLTAGE_STATES] = {0};
- unsigned int optimal_dcfclk_for_uclk[DC__VOLTAGE_STATES] = {0};
-
- unsigned int dcfclk_sta_targets[DC__VOLTAGE_STATES] = {615, 906, 1324, 1564};
- unsigned int num_dcfclk_sta_targets = 4, num_uclk_states = 0;
- unsigned int max_dcfclk_mhz = 0, max_dispclk_mhz = 0, max_dppclk_mhz = 0, max_phyclk_mhz = 0;
-
- for (i = 0; i < MAX_NUM_DPM_LVL; i++) {
- if (bw_params->clk_table.entries[i].dcfclk_mhz > max_dcfclk_mhz)
- max_dcfclk_mhz = bw_params->clk_table.entries[i].dcfclk_mhz;
- if (bw_params->clk_table.entries[i].dispclk_mhz > max_dispclk_mhz)
- max_dispclk_mhz = bw_params->clk_table.entries[i].dispclk_mhz;
- if (bw_params->clk_table.entries[i].dppclk_mhz > max_dppclk_mhz)
- max_dppclk_mhz = bw_params->clk_table.entries[i].dppclk_mhz;
- if (bw_params->clk_table.entries[i].phyclk_mhz > max_phyclk_mhz)
- max_phyclk_mhz = bw_params->clk_table.entries[i].phyclk_mhz;
- }
- if (!max_dcfclk_mhz)
- max_dcfclk_mhz = dcn3_21_soc.clock_limits[0].dcfclk_mhz;
- if (!max_dispclk_mhz)
- max_dispclk_mhz = dcn3_21_soc.clock_limits[0].dispclk_mhz;
- if (!max_dppclk_mhz)
- max_dppclk_mhz = dcn3_21_soc.clock_limits[0].dppclk_mhz;
- if (!max_phyclk_mhz)
- max_phyclk_mhz = dcn3_21_soc.clock_limits[0].phyclk_mhz;
-
- if (max_dcfclk_mhz > dcfclk_sta_targets[num_dcfclk_sta_targets-1]) {
- // If max DCFCLK is greater than the max DCFCLK STA target, insert into the DCFCLK STA target array
- dcfclk_sta_targets[num_dcfclk_sta_targets] = max_dcfclk_mhz;
- num_dcfclk_sta_targets++;
- } else if (max_dcfclk_mhz < dcfclk_sta_targets[num_dcfclk_sta_targets-1]) {
- // If max DCFCLK is less than the max DCFCLK STA target, cap values and remove duplicates
- for (i = 0; i < num_dcfclk_sta_targets; i++) {
- if (dcfclk_sta_targets[i] > max_dcfclk_mhz) {
- dcfclk_sta_targets[i] = max_dcfclk_mhz;
- break;
- }
+ if (dc->debug.use_legacy_soc_bb_mechanism) {
+ unsigned int i = 0, j = 0, num_states = 0;
+
+ unsigned int dcfclk_mhz[DC__VOLTAGE_STATES] = {0};
+ unsigned int dram_speed_mts[DC__VOLTAGE_STATES] = {0};
+ unsigned int optimal_uclk_for_dcfclk_sta_targets[DC__VOLTAGE_STATES] = {0};
+ unsigned int optimal_dcfclk_for_uclk[DC__VOLTAGE_STATES] = {0};
+
+ unsigned int dcfclk_sta_targets[DC__VOLTAGE_STATES] = {615, 906, 1324, 1564};
+ unsigned int num_dcfclk_sta_targets = 4, num_uclk_states = 0;
+ unsigned int max_dcfclk_mhz = 0, max_dispclk_mhz = 0, max_dppclk_mhz = 0, max_phyclk_mhz = 0;
+
+ for (i = 0; i < MAX_NUM_DPM_LVL; i++) {
+ if (bw_params->clk_table.entries[i].dcfclk_mhz > max_dcfclk_mhz)
+ max_dcfclk_mhz = bw_params->clk_table.entries[i].dcfclk_mhz;
+ if (bw_params->clk_table.entries[i].dispclk_mhz > max_dispclk_mhz)
+ max_dispclk_mhz = bw_params->clk_table.entries[i].dispclk_mhz;
+ if (bw_params->clk_table.entries[i].dppclk_mhz > max_dppclk_mhz)
+ max_dppclk_mhz = bw_params->clk_table.entries[i].dppclk_mhz;
+ if (bw_params->clk_table.entries[i].phyclk_mhz > max_phyclk_mhz)
+ max_phyclk_mhz = bw_params->clk_table.entries[i].phyclk_mhz;
+ }
+ if (!max_dcfclk_mhz)
+ max_dcfclk_mhz = dcn3_21_soc.clock_limits[0].dcfclk_mhz;
+ if (!max_dispclk_mhz)
+ max_dispclk_mhz = dcn3_21_soc.clock_limits[0].dispclk_mhz;
+ if (!max_dppclk_mhz)
+ max_dppclk_mhz = dcn3_21_soc.clock_limits[0].dppclk_mhz;
+ if (!max_phyclk_mhz)
+ max_phyclk_mhz = dcn3_21_soc.clock_limits[0].phyclk_mhz;
+
+ if (max_dcfclk_mhz > dcfclk_sta_targets[num_dcfclk_sta_targets-1]) {
+ // If max DCFCLK is greater than the max DCFCLK STA target, insert into the DCFCLK STA target array
+ dcfclk_sta_targets[num_dcfclk_sta_targets] = max_dcfclk_mhz;
+ num_dcfclk_sta_targets++;
+ } else if (max_dcfclk_mhz < dcfclk_sta_targets[num_dcfclk_sta_targets-1]) {
+ // If max DCFCLK is less than the max DCFCLK STA target, cap values and remove duplicates
+ for (i = 0; i < num_dcfclk_sta_targets; i++) {
+ if (dcfclk_sta_targets[i] > max_dcfclk_mhz) {
+ dcfclk_sta_targets[i] = max_dcfclk_mhz;
+ break;
}
- // Update size of array since we "removed" duplicates
- num_dcfclk_sta_targets = i + 1;
}
+ // Update size of array since we "removed" duplicates
+ num_dcfclk_sta_targets = i + 1;
+ }
- num_uclk_states = bw_params->clk_table.num_entries;
+ num_uclk_states = bw_params->clk_table.num_entries;
- // Calculate optimal dcfclk for each uclk
- for (i = 0; i < num_uclk_states; i++) {
- dcn321_get_optimal_dcfclk_fclk_for_uclk(bw_params->clk_table.entries[i].memclk_mhz * 16,
- &optimal_dcfclk_for_uclk[i], NULL);
- if (optimal_dcfclk_for_uclk[i] < bw_params->clk_table.entries[0].dcfclk_mhz) {
- optimal_dcfclk_for_uclk[i] = bw_params->clk_table.entries[0].dcfclk_mhz;
- }
+ // Calculate optimal dcfclk for each uclk
+ for (i = 0; i < num_uclk_states; i++) {
+ dcn321_get_optimal_dcfclk_fclk_for_uclk(bw_params->clk_table.entries[i].memclk_mhz * 16,
+ &optimal_dcfclk_for_uclk[i], NULL);
+ if (optimal_dcfclk_for_uclk[i] < bw_params->clk_table.entries[0].dcfclk_mhz) {
+ optimal_dcfclk_for_uclk[i] = bw_params->clk_table.entries[0].dcfclk_mhz;
}
+ }
- // Calculate optimal uclk for each dcfclk sta target
- for (i = 0; i < num_dcfclk_sta_targets; i++) {
- for (j = 0; j < num_uclk_states; j++) {
- if (dcfclk_sta_targets[i] < optimal_dcfclk_for_uclk[j]) {
- optimal_uclk_for_dcfclk_sta_targets[i] =
- bw_params->clk_table.entries[j].memclk_mhz * 16;
- break;
- }
+ // Calculate optimal uclk for each dcfclk sta target
+ for (i = 0; i < num_dcfclk_sta_targets; i++) {
+ for (j = 0; j < num_uclk_states; j++) {
+ if (dcfclk_sta_targets[i] < optimal_dcfclk_for_uclk[j]) {
+ optimal_uclk_for_dcfclk_sta_targets[i] =
+ bw_params->clk_table.entries[j].memclk_mhz * 16;
+ break;
}
}
+ }
- i = 0;
- j = 0;
- // create the final dcfclk and uclk table
- while (i < num_dcfclk_sta_targets && j < num_uclk_states && num_states < DC__VOLTAGE_STATES) {
- if (dcfclk_sta_targets[i] < optimal_dcfclk_for_uclk[j] && i < num_dcfclk_sta_targets) {
- dcfclk_mhz[num_states] = dcfclk_sta_targets[i];
- dram_speed_mts[num_states++] = optimal_uclk_for_dcfclk_sta_targets[i++];
+ i = 0;
+ j = 0;
+ // create the final dcfclk and uclk table
+ while (i < num_dcfclk_sta_targets && j < num_uclk_states && num_states < DC__VOLTAGE_STATES) {
+ if (dcfclk_sta_targets[i] < optimal_dcfclk_for_uclk[j] && i < num_dcfclk_sta_targets) {
+ dcfclk_mhz[num_states] = dcfclk_sta_targets[i];
+ dram_speed_mts[num_states++] = optimal_uclk_for_dcfclk_sta_targets[i++];
+ } else {
+ if (j < num_uclk_states && optimal_dcfclk_for_uclk[j] <= max_dcfclk_mhz) {
+ dcfclk_mhz[num_states] = optimal_dcfclk_for_uclk[j];
+ dram_speed_mts[num_states++] = bw_params->clk_table.entries[j++].memclk_mhz * 16;
} else {
- if (j < num_uclk_states && optimal_dcfclk_for_uclk[j] <= max_dcfclk_mhz) {
- dcfclk_mhz[num_states] = optimal_dcfclk_for_uclk[j];
- dram_speed_mts[num_states++] = bw_params->clk_table.entries[j++].memclk_mhz * 16;
- } else {
- j = num_uclk_states;
- }
+ j = num_uclk_states;
}
}
+ }
- while (i < num_dcfclk_sta_targets && num_states < DC__VOLTAGE_STATES) {
- dcfclk_mhz[num_states] = dcfclk_sta_targets[i];
- dram_speed_mts[num_states++] = optimal_uclk_for_dcfclk_sta_targets[i++];
- }
+ while (i < num_dcfclk_sta_targets && num_states < DC__VOLTAGE_STATES) {
+ dcfclk_mhz[num_states] = dcfclk_sta_targets[i];
+ dram_speed_mts[num_states++] = optimal_uclk_for_dcfclk_sta_targets[i++];
+ }
- while (j < num_uclk_states && num_states < DC__VOLTAGE_STATES &&
- optimal_dcfclk_for_uclk[j] <= max_dcfclk_mhz) {
- dcfclk_mhz[num_states] = optimal_dcfclk_for_uclk[j];
- dram_speed_mts[num_states++] = bw_params->clk_table.entries[j++].memclk_mhz * 16;
- }
+ while (j < num_uclk_states && num_states < DC__VOLTAGE_STATES &&
+ optimal_dcfclk_for_uclk[j] <= max_dcfclk_mhz) {
+ dcfclk_mhz[num_states] = optimal_dcfclk_for_uclk[j];
+ dram_speed_mts[num_states++] = bw_params->clk_table.entries[j++].memclk_mhz * 16;
+ }
- dcn3_21_soc.num_states = num_states;
- for (i = 0; i < dcn3_21_soc.num_states; i++) {
- dcn3_21_soc.clock_limits[i].state = i;
- dcn3_21_soc.clock_limits[i].dcfclk_mhz = dcfclk_mhz[i];
- dcn3_21_soc.clock_limits[i].fabricclk_mhz = dcfclk_mhz[i];
-
- /* Fill all states with max values of all these clocks */
- dcn3_21_soc.clock_limits[i].dispclk_mhz = max_dispclk_mhz;
- dcn3_21_soc.clock_limits[i].dppclk_mhz = max_dppclk_mhz;
- dcn3_21_soc.clock_limits[i].phyclk_mhz = max_phyclk_mhz;
- dcn3_21_soc.clock_limits[i].dscclk_mhz = max_dispclk_mhz / 3;
-
- /* Populate from bw_params for DTBCLK, SOCCLK */
- if (i > 0) {
- if (!bw_params->clk_table.entries[i].dtbclk_mhz) {
- dcn3_21_soc.clock_limits[i].dtbclk_mhz = dcn3_21_soc.clock_limits[i-1].dtbclk_mhz;
- } else {
- dcn3_21_soc.clock_limits[i].dtbclk_mhz = bw_params->clk_table.entries[i].dtbclk_mhz;
- }
- } else if (bw_params->clk_table.entries[i].dtbclk_mhz) {
+ dcn3_21_soc.num_states = num_states;
+ for (i = 0; i < dcn3_21_soc.num_states; i++) {
+ dcn3_21_soc.clock_limits[i].state = i;
+ dcn3_21_soc.clock_limits[i].dcfclk_mhz = dcfclk_mhz[i];
+ dcn3_21_soc.clock_limits[i].fabricclk_mhz = dcfclk_mhz[i];
+
+ /* Fill all states with max values of all these clocks */
+ dcn3_21_soc.clock_limits[i].dispclk_mhz = max_dispclk_mhz;
+ dcn3_21_soc.clock_limits[i].dppclk_mhz = max_dppclk_mhz;
+ dcn3_21_soc.clock_limits[i].phyclk_mhz = max_phyclk_mhz;
+ dcn3_21_soc.clock_limits[i].dscclk_mhz = max_dispclk_mhz / 3;
+
+ /* Populate from bw_params for DTBCLK, SOCCLK */
+ if (i > 0) {
+ if (!bw_params->clk_table.entries[i].dtbclk_mhz) {
+ dcn3_21_soc.clock_limits[i].dtbclk_mhz = dcn3_21_soc.clock_limits[i-1].dtbclk_mhz;
+ } else {
dcn3_21_soc.clock_limits[i].dtbclk_mhz = bw_params->clk_table.entries[i].dtbclk_mhz;
}
+ } else if (bw_params->clk_table.entries[i].dtbclk_mhz) {
+ dcn3_21_soc.clock_limits[i].dtbclk_mhz = bw_params->clk_table.entries[i].dtbclk_mhz;
+ }
- if (!bw_params->clk_table.entries[i].socclk_mhz && i > 0)
- dcn3_21_soc.clock_limits[i].socclk_mhz = dcn3_21_soc.clock_limits[i-1].socclk_mhz;
- else
- dcn3_21_soc.clock_limits[i].socclk_mhz = bw_params->clk_table.entries[i].socclk_mhz;
+ if (!bw_params->clk_table.entries[i].socclk_mhz && i > 0)
+ dcn3_21_soc.clock_limits[i].socclk_mhz = dcn3_21_soc.clock_limits[i-1].socclk_mhz;
+ else
+ dcn3_21_soc.clock_limits[i].socclk_mhz = bw_params->clk_table.entries[i].socclk_mhz;
- if (!dram_speed_mts[i] && i > 0)
- dcn3_21_soc.clock_limits[i].dram_speed_mts = dcn3_21_soc.clock_limits[i-1].dram_speed_mts;
- else
- dcn3_21_soc.clock_limits[i].dram_speed_mts = dram_speed_mts[i];
+ if (!dram_speed_mts[i] && i > 0)
+ dcn3_21_soc.clock_limits[i].dram_speed_mts = dcn3_21_soc.clock_limits[i-1].dram_speed_mts;
+ else
+ dcn3_21_soc.clock_limits[i].dram_speed_mts = dram_speed_mts[i];
- /* These clocks cannot come from bw_params, always fill from dcn3_21_soc[0] */
- /* PHYCLK_D18, PHYCLK_D32 */
- dcn3_21_soc.clock_limits[i].phyclk_d18_mhz = dcn3_21_soc.clock_limits[0].phyclk_d18_mhz;
- dcn3_21_soc.clock_limits[i].phyclk_d32_mhz = dcn3_21_soc.clock_limits[0].phyclk_d32_mhz;
- }
- } else {
- build_synthetic_soc_states(bw_params, dcn3_21_soc.clock_limits, &dcn3_21_soc.num_states);
+ /* These clocks cannot come from bw_params, always fill from dcn3_21_soc[0] */
+ /* PHYCLK_D18, PHYCLK_D32 */
+ dcn3_21_soc.clock_limits[i].phyclk_d18_mhz = dcn3_21_soc.clock_limits[0].phyclk_d18_mhz;
+ dcn3_21_soc.clock_limits[i].phyclk_d32_mhz = dcn3_21_soc.clock_limits[0].phyclk_d32_mhz;
}
+ } else {
+ build_synthetic_soc_states(bw_params, dcn3_21_soc.clock_limits, &dcn3_21_soc.num_states);
+ }
- /* Re-init DML with updated bb */
- dml_init_instance(&dc->dml, &dcn3_21_soc, &dcn3_21_ip, DML_PROJECT_DCN32);
- if (dc->current_state)
- dml_init_instance(&dc->current_state->bw_ctx.dml, &dcn3_21_soc, &dcn3_21_ip, DML_PROJECT_DCN32);
+ /* Re-init DML with updated bb */
+ dml_init_instance(&dc->dml, &dcn3_21_soc, &dcn3_21_ip, DML_PROJECT_DCN32);
+ if (dc->current_state)
+ dml_init_instance(&dc->current_state->bw_ctx.dml, &dcn3_21_soc, &dcn3_21_ip, DML_PROJECT_DCN32);
}
--
2.20.1.7.g153144c
More information about the dri-devel
mailing list