[PATCH v6] drm/msm/dp: enable HDP plugin/unplugged interrupts at hpd_enable/disable

[Abhinav Kumar]

On 5/23/2023 2:52 PM, Kuogee Hsieh wrote:
> The internal_hpd flag is set to true by dp_bridge_hpd_enable() and set to
> false by dp_bridge_hpd_disable() to handle GPIO pinmuxed into DP controller
> case. HDP related interrupts can not be enabled until internal_hpd is set
> to true. At current implementation dp_display_config_hpd() will initialize
> DP host controller first followed by enabling HDP related interrupts if
> internal_hpd was true at that time. Enable HDP related interrupts depends on
> internal_hpd status may leave system with DP driver host is in running state
> but without HDP related interrupts being enabled. This will prevent external
> display from being detected. Eliminated this dependency by moving HDP related
> interrupts enable/disable be done at dp_bridge_hpd_enable/disable() directly
> regardless of internal_hpd status.
> 
> Changes in V3:
> -- dp_catalog_ctrl_hpd_enable() and dp_catalog_ctrl_hpd_disable()
> -- rewording ocmmit text
> 
> Changes in V4:
> -- replace dp_display_config_hpd() with dp_display_host_start()
> -- move enable_irq() at dp_display_host_start();
> 
> Changes in V5:
> -- replace dp_display_host_start() with dp_display_host_init()
> 
> Changes in V6:
> -- squash remove enable_irq() and disable_irq()
> 
> Fixes: cd198caddea7 ("drm/msm/dp: Rely on hpd_enable/disable callbacks")
> Signed-off-by: Kuogee Hsieh <quic_khsieh at quicinc.com>
> ---

Reviewed-by: Abhinav Kumar <quic_abhinavk at quicinc.com>