[PATCH v7 6/6] drm/i915/panelreplay: Debugfs support for panel replay
Hogander, Jouni
jouni.hogander at intel.com
Thu Nov 2 07:38:28 UTC 2023
On Wed, 2023-10-11 at 16:39 +0530, Animesh Manna wrote:
> Add debugfs support which will print source and sink status
> per connector basis.
Sorry for late review. Noticed only by now that you have added this
patch into you set.
Can you please describe in commit message how you see the output of
debugfs interface will look like after your changes?
>
> v1: Initial version. [rb-ed by Arun]
> v2: Added check for DP 2.0 and connector type in
> connector_debugfs_add().
>
> Cc: Jouni Högander <jouni.hogander at intel.com>
> Cc: Arun R Murthy <arun.r.murthy at intel.com>
> Cc: Jani Nikula <jani.nikula at intel.com>
> Signed-off-by: Animesh Manna <animesh.manna at intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_psr.c | 136 +++++++++++++++++----
> --
> 1 file changed, 102 insertions(+), 34 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_psr.c
> b/drivers/gpu/drm/i915/display/intel_psr.c
> index 80de831c2f60..399fc0a8e636 100644
> --- a/drivers/gpu/drm/i915/display/intel_psr.c
> +++ b/drivers/gpu/drm/i915/display/intel_psr.c
> @@ -2823,6 +2823,25 @@ static int
> psr_get_status_and_error_status(struct intel_dp *intel_dp,
> return 0;
> }
>
> +static int panel_replay_get_status_and_error_status(struct intel_dp
> *intel_dp,
> + u8 *status, u8
> *error_status)
> +{
> + struct drm_dp_aux *aux = &intel_dp->aux;
> + int ret;
> +
> + ret = drm_dp_dpcd_readb(aux,
> DP_SINK_DEVICE_PR_AND_FRAME_LOCK_STATUS, status);
> + if (ret != 1)
> + return ret;
> +
> + ret = drm_dp_dpcd_readb(aux, DP_PANEL_REPLAY_ERROR_STATUS,
> error_status);
> + if (ret != 1)
> + return ret;
> +
> + *status = *status & DP_PSR_SINK_STATE_MASK;
> +
> + return 0;
> +}
> +
I think you should modify psr_get_status_and_error_status instead of
duplicating most of it.
> static void psr_alpm_check(struct intel_dp *intel_dp)
> {
> struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
> @@ -3035,7 +3054,7 @@ psr_source_status(struct intel_dp *intel_dp,
> struct seq_file *m)
> status = live_status[status_val];
> }
>
> - seq_printf(m, "Source PSR status: %s [0x%08x]\n", status,
> val);
> + seq_printf(m, "Source PSR/PanelReplay status: %s [0x%08x]\n",
> status, val);
> }
>
> static int intel_psr_status(struct seq_file *m, struct intel_dp
> *intel_dp)
> @@ -3048,18 +3067,23 @@ static int intel_psr_status(struct seq_file
> *m, struct intel_dp *intel_dp)
> bool enabled;
> u32 val;
>
> - seq_printf(m, "Sink support: %s", str_yes_no(psr-
> >sink_support));
> - if (psr->sink_support)
> + seq_printf(m, "Sink support: PSR = %s, Panel Replay = %s",
> + str_yes_no(psr->sink_support),
> + str_yes_no(psr->sink_panel_replay_support));
> +
> + if (psr->sink_support || psr->sink_panel_replay_support)
> seq_printf(m, " [0x%02x]", intel_dp->psr_dpcd[0]);
> seq_puts(m, "\n");
>
> - if (!psr->sink_support)
> + if (!(psr->sink_support || psr->sink_panel_replay_support))
> return 0;
>
> wakeref = intel_runtime_pm_get(&dev_priv->runtime_pm);
> mutex_lock(&psr->lock);
>
> - if (psr->enabled)
> + if (psr->panel_replay_enabled)
> + status = "Panel Replay Enabled";
> + else if (psr->enabled)
> status = psr->psr2_enabled ? "PSR2 enabled" : "PSR1
> enabled";
> else
> status = "disabled";
> @@ -3072,14 +3096,17 @@ static int intel_psr_status(struct seq_file
> *m, struct intel_dp *intel_dp)
> goto unlock;
> }
>
> - if (psr->psr2_enabled) {
> + if (psr->panel_replay_enabled) {
> + val = intel_de_read(dev_priv,
> TRANS_DP2_CTL(cpu_transcoder));
> + enabled = val & TRANS_DP2_PANEL_REPLAY_ENABLE;
> + } else if (psr->psr2_enabled) {
> val = intel_de_read(dev_priv,
> EDP_PSR2_CTL(cpu_transcoder));
>
> enabled = val & EDP_PSR2_ENABLE;
> } else {
> val = intel_de_read(dev_priv, psr_ctl_reg(dev_priv,
> cpu_transcoder));
> enabled = val & EDP_PSR_ENABLE;
> }
> - seq_printf(m, "Source PSR ctl: %s [0x%08x]\n",
> + seq_printf(m, "Source PSR/PanelReplay ctl: %s [0x%08x]\n",
> str_enabled_disabled(enabled), val);
> psr_source_status(intel_dp, m);
> seq_printf(m, "Busy frontbuffer bits: 0x%08x\n",
> @@ -3221,6 +3248,7 @@ static int i915_psr_sink_status_show(struct
> seq_file *m, void *data)
> {
> struct intel_connector *connector = m->private;
> struct intel_dp *intel_dp = intel_attached_dp(connector);
> + struct intel_psr *psr = &intel_dp->psr;
> static const char * const sink_status[] = {
> "inactive",
> "transition to active, capture and display",
> @@ -3231,45 +3259,82 @@ static int i915_psr_sink_status_show(struct
> seq_file *m, void *data)
> "reserved",
> "sink internal error",
> };
> + static const char * const panel_replay_status[] = {
> + "Sink device frame is locked to the Source device",
> + "Sink device is coasting, using the VTotal target",
> + "Sink device is governing the frame rate (frame rate
> unlock is granted)",
> + "Sink device in the process of re-locking with the
> Source device",
> + };
> const char *str;
> int ret;
> u8 status, error_status;
>
> - if (!CAN_PSR(intel_dp)) {
> - seq_puts(m, "PSR Unsupported\n");
> + if (!(CAN_PSR(intel_dp) || CAN_PANEL_REPLAY(intel_dp))) {
> + seq_puts(m, "PSR/Panel-Replay Unsupported\n");
> return -ENODEV;
> }
>
> if (connector->base.status != connector_status_connected)
> return -ENODEV;
>
> - ret = psr_get_status_and_error_status(intel_dp, &status,
> &error_status);
> - if (ret)
> - return ret;
> + if (psr->panel_replay_enabled) {
> + u32 temp;
>
> - status &= DP_PSR_SINK_STATE_MASK;
> - if (status < ARRAY_SIZE(sink_status))
> - str = sink_status[status];
> - else
> - str = "unknown";
> + ret =
> panel_replay_get_status_and_error_status(intel_dp, &status,
> &error_status);
> + if (ret)
> + return ret;
>
> - seq_printf(m, "Sink PSR status: 0x%x [%s]\n", status, str);
> + temp = status & DP_SINK_FRAME_LOCKED_MASK;
> + temp >>= DP_SINK_FRAME_LOCKED_SHIFT;
> + if (temp < ARRAY_SIZE(panel_replay_status))
> + str = panel_replay_status[temp];
> + else
> + str = "unknown";
>
> - seq_printf(m, "Sink PSR error status: 0x%x", error_status);
> + seq_printf(m, "Sink Panel Replay status: 0x%x
> [%s]\n", status, str);
>
> - if (error_status & (DP_PSR_RFB_STORAGE_ERROR |
> - DP_PSR_VSC_SDP_UNCORRECTABLE_ERROR |
> - DP_PSR_LINK_CRC_ERROR))
> - seq_puts(m, ":\n");
> - else
> - seq_puts(m, "\n");
> - if (error_status & DP_PSR_RFB_STORAGE_ERROR)
> - seq_puts(m, "\tPSR RFB storage error\n");
> - if (error_status & DP_PSR_VSC_SDP_UNCORRECTABLE_ERROR)
> - seq_puts(m, "\tPSR VSC SDP uncorrectable error\n");
> - if (error_status & DP_PSR_LINK_CRC_ERROR)
> - seq_puts(m, "\tPSR Link CRC error\n");
> + seq_printf(m, "Sink Panel Replay error status: 0x%x",
> error_status);
> +
> + if (error_status & (DP_PANEL_REPLAY_RFB_STORAGE_ERROR
> |
> +
> DP_PANEL_REPLAY_VSC_SDP_UNCORRECTABLE_ERROR |
> + DP_PANEL_REPLAY_LINK_CRC_ERROR))
> + seq_puts(m, ":\n");
> + else
> + seq_puts(m, "\n");
> + if (error_status & DP_PANEL_REPLAY_RFB_STORAGE_ERROR)
> + seq_puts(m, "\tPANEL-REPLAY RFB storage
> error\n");
> + if (error_status &
> DP_PANEL_REPLAY_VSC_SDP_UNCORRECTABLE_ERROR)
> + seq_puts(m, "\tPANEL-REPLAY VSC SDP
> uncorrectable error\n");
> + if (error_status & DP_PANEL_REPLAY_LINK_CRC_ERROR)
> + seq_puts(m, "\tPANEL-REPLAY Link CRC
> error\n");
> + } else {
> + ret = psr_get_status_and_error_status(intel_dp,
> &status, &error_status);
> + if (ret)
> + return ret;
> +
> + status &= DP_PSR_SINK_STATE_MASK;
> + if (status < ARRAY_SIZE(sink_status))
> + str = sink_status[status];
> + else
> + str = "unknown";
> +
> + seq_printf(m, "Sink PSR status: 0x%x [%s]\n", status,
> str);
> +
> + seq_printf(m, "Sink PSR error status: 0x%x",
> error_status);
>
> + if (error_status & (DP_PSR_RFB_STORAGE_ERROR |
> +
> DP_PSR_VSC_SDP_UNCORRECTABLE_ERROR |
> + DP_PSR_LINK_CRC_ERROR))
> + seq_puts(m, ":\n");
> + else
> + seq_puts(m, "\n");
> + if (error_status & DP_PSR_RFB_STORAGE_ERROR)
> + seq_puts(m, "\tPSR RFB storage error\n");
> + if (error_status &
> DP_PSR_VSC_SDP_UNCORRECTABLE_ERROR)
> + seq_puts(m, "\tPSR VSC SDP uncorrectable
> error\n");
> + if (error_status & DP_PSR_LINK_CRC_ERROR)
> + seq_puts(m, "\tPSR Link CRC error\n");
> + }
Instead of duplicating so much here I think it woukd be ok to just drop
PSR and do (same applies for all the statuses):
if (error_status & (DP_PSR_LINK_CRC_ERROR |
DP_PANEL_REPLAY_LINK_CRC_ERROR))
seq_puts(m, "\tLink CRC error\n");
What do you think?
> return ret;
> }
> DEFINE_SHOW_ATTRIBUTE(i915_psr_sink_status);
> @@ -3288,13 +3353,16 @@ void intel_psr_connector_debugfs_add(struct
> intel_connector *connector)
> struct drm_i915_private *i915 = to_i915(connector->base.dev);
> struct dentry *root = connector->base.debugfs_entry;
>
> - if (connector->base.connector_type != DRM_MODE_CONNECTOR_eDP)
> - return;
> + if (connector->base.connector_type != DRM_MODE_CONNECTOR_eDP)
> {
> + if (!(HAS_DP20(i915) &&
> + connector->base.connector_type ==
> DRM_MODE_CONNECTOR_DisplayPort))
> + return;
> + }
Why do you need to check DRM_MODE_CONNECTOR_DisplayPort ? I think
connector->base.connector_type != DRM_MODE_CONNECTOR_eDP &&
!HAS_DP20(i915) is enough.
BR,
Jouni Högander
>
> debugfs_create_file("i915_psr_sink_status", 0444, root,
> connector, &i915_psr_sink_status_fops);
>
> - if (HAS_PSR(i915))
> + if (HAS_PSR(i915) || HAS_DP20(i915))
> debugfs_create_file("i915_psr_status", 0444, root,
> connector,
> &i915_psr_status_fops);
> }
More information about the dri-devel
mailing list