[PATCH v5 4/4] drm/panel-edp: Avoid adding multiple preferred modes
Hsin-Yi Wang
hsinyi at chromium.org
Mon Nov 6 23:51:35 UTC 2023
If a non generic edp-panel is under aux-bus, the mode read from edid would
still be selected as preferred and results in multiple preferred modes,
which is ambiguous.
If both hard-coded mode and edid exists, only add mode from hard-coded.
Signed-off-by: Hsin-Yi Wang <hsinyi at chromium.org>
---
v4->v5: remove inapplicable comments.
---
drivers/gpu/drm/panel/panel-edp.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-edp.c b/drivers/gpu/drm/panel/panel-edp.c
index c0c24d94c3a0..006939cc3fee 100644
--- a/drivers/gpu/drm/panel/panel-edp.c
+++ b/drivers/gpu/drm/panel/panel-edp.c
@@ -589,6 +589,7 @@ static int panel_edp_get_modes(struct drm_panel *panel,
{
struct panel_edp *p = to_panel_edp(panel);
int num = 0;
+ bool has_hard_coded_modes = p->desc->num_timings || p->desc->num_modes;
bool has_override_edid_mode = p->detected_panel &&
p->detected_panel != ERR_PTR(-EINVAL) &&
p->detected_panel->override_edid_mode;
@@ -599,7 +600,11 @@ static int panel_edp_get_modes(struct drm_panel *panel,
if (!p->edid)
p->edid = drm_get_edid(connector, p->ddc);
- if (p->edid) {
+ /*
+ * If both edid and hard-coded modes exists, skip edid modes to
+ * avoid multiple preferred modes.
+ */
+ if (p->edid && !has_hard_coded_modes) {
if (has_override_edid_mode) {
/*
* override_edid_mode is specified. Use
@@ -616,12 +621,7 @@ static int panel_edp_get_modes(struct drm_panel *panel,
pm_runtime_put_autosuspend(panel->dev);
}
- /*
- * Add hard-coded panel modes. Don't call this if there are no timings
- * and no modes (the generic edp-panel case) because it will clobber
- * the display_info that was already set by drm_add_edid_modes().
- */
- if (p->desc->num_timings || p->desc->num_modes)
+ if (has_hard_coded_modes)
num += panel_edp_get_non_edid_modes(p, connector);
else if (!num)
dev_warn(p->base.dev, "No display modes\n");
--
2.42.0.869.gea05f2083d-goog
More information about the dri-devel
mailing list