[PATCH 0/3] drm/ci: Add support for SM8250 Gitlab Runner

[Helen Koike]

On 07/11/2023 21:10, Jessica Zhang wrote:
> 
> 
> On 11/6/2023 9:35 AM, Jessica Zhang wrote:
>>
>>
>> On 11/4/2023 6:02 AM, Helen Koike wrote:
>>> Hi Jessica,
>>>
>>> On 10/10/2023 19:25, Jessica Zhang wrote:
>>>> Recently, we've registered a Gitlab runner for a Qualcomm RB5 device 
>>>> that will be
>>>> hosted and maintained in Qualcomm labs.
>>>>
>>>> This series will add a corresponding CI job for testing SM8250 
>>>> devices and add the
>>>> skip/fails/flakes list. We were able to complete a successful run 
>>>> [1] with these
>>>> changes.
>>>>
>>>> For now, we will keep the job as manual trigger only and drop that 
>>>> rule later
>>>> after we stabilize the tests.
>>>>
>>>> [1] https://gitlab.freedesktop.org/drm/msm/-/jobs/50092719
>>>>
>>>> ---
>>>
>>> Thank you for you patchset.
>>>
>>> I'm getting the following error:
>>>
>>> "serial.serialutil.SerialException: [Errno 2] could not open port 
>>> /dev/ttyUSB0: [Errno 2] No such file or directory: '/dev/ttyUSB0'"
>>>
>>> https://gitlab.freedesktop.org/helen.fornazier/linux/-/jobs/51193215#L146
>>>
>>> I'm wondering if I'm missing some configuration.
>>>
>>> I tested on top of drm-misc-next.
>>
>> Hi Helen,
>>
>> Sorry for the inconvenience, but I had to temporarily take down the 
>> runner last Friday to physically move the setup (as part of a 
>> reorganization of our lab here).
>>
>> I'll update this thread as soon as the runner is back up -- the move 
>> will be complete by the end of this week.
> The RB5 runner is back up -- please let me know if you run into any 
> issues with it.

It worked now, I runned on drm-tip-next, I got several UnexpectedPass, 
except for kms_color at ctm-green-to-red,Fail, could you check if those are 
flakes or things got fixed and we can remove them from -fails.txt?

https://gitlab.freedesktop.org/helen.fornazier/linux/-/jobs/51385345#L23356


Thanks!

Regards,
Helen

> 
> Thanks,
> 
> Jessica Zhang
> 
>>
>>>
>>> Also, I'd like to add in the docs an entry about the devices we have, 
>>> which tag they need, which dts they correspond to, which farm they 
>>> are located, who to contact if there is any problem and maybe some 
>>> comment about the device (how it is hooked up, the logs comes from 
>>> uart or ssh, does it use fastboot, etc) if you find it useful.
>>> Would you mind adding an entry in the docs with this information for 
>>> the sm8250? (Than I'll add the info of the other devices after yours).
>>
>> Sure, sounds good.
>>
>>>
>>>
>>>> Jessica Zhang (3):
>>>>        drm/ci: Add SM8250 job to CI
>>>
>>> I would also move this patch to last, so we don't have a commit where 
>>> things shouldn't work properly.
>>> Or maybe squash them all.
>>
>> Acked -- I'll move this patch to the end.
>>
>> Thanks,
>>
>> Jessica Zhang
>>
>>>
>>> Regards,
>>> Helen
>>>
>>>>        drm/ci: enable CONFIG_INTERCONNECT_QCOM_SM8250 for arm64 config
>>>>        drm/ci: Add skips, fails and flakes for SM8250
>>>>
>>>>   drivers/gpu/drm/ci/arm64.config                 |  1 +
>>>>   drivers/gpu/drm/ci/build.sh                     |  1 +
>>>>   drivers/gpu/drm/ci/test.yml                     | 15 +++++++++++++
>>>>   drivers/gpu/drm/ci/xfails/msm-sm8250-fails.txt  | 29 
>>>> +++++++++++++++++++++++++
>>>>   drivers/gpu/drm/ci/xfails/msm-sm8250-flakes.txt |  3 +++
>>>>   drivers/gpu/drm/ci/xfails/msm-sm8250-skips.txt  |  8 +++++++
>>>>   6 files changed, 57 insertions(+)
>>>> ---
>>>> base-commit: dcd88f8c63341ed11a8c5019408f62202cd9d1f2
>>>> change-id: 20230919-rb5-runner-77ec32bd61e7
>>>>
>>>> Best regards,