[RFC][PATCH v5 0/6] drm/panic: Add a drm panic handler

[nerdopolis]

On Friday, November 3, 2023 10:53:24 AM EST Jocelyn Falempe wrote:
> This introduces a new drm panic handler, which displays a message when a panic occurs.
> So when fbcon is disabled, you can still see a kernel panic.
> 
> This is one of the missing feature, when disabling VT/fbcon in the kernel:
> https://www.reddit.com/r/linux/comments/10eccv9/config_vtn_in_2023/
> Fbcon can be replaced by a userspace kms console, but the panic screen must be done in the kernel.
> 
> This is a proof of concept, and works with simpledrm and mgag200, using a new get_scanout_buffer() api
> 
> To test it, make sure you're using the simpledrm driver, and trigger a panic:
> echo c > /proc/sysrq-trigger
> 
> v2:
>  * Use get_scanout_buffer() instead of the drm client API. (Thomas Zimmermann)
>  * Add the panic reason to the panic message (Nerdopolis)
>  * Add an exclamation mark (Nerdopolis)
>  
> v3:
>  * Rework the drawing functions, to write the pixels line by line and
>  to use the drm conversion helper to support other formats.
>  (Thomas Zimmermann)
>  
> v4:
>  * Fully support all simpledrm formats using drm conversion helpers
>  * Rename dpanic_* to drm_panic_*, and have more coherent function name.
>    (Thomas Zimmermann)
>  * Use drm_fb_r1_to_32bit for fonts (Thomas Zimmermann)
>  * Remove the default y to DRM_PANIC config option (Thomas Zimmermann)
>  * Add foreground/background color config option
>  * Fix the bottom lines not painted if the framebuffer height
>    is not a multiple of the font height.
>  * Automatically register the driver to drm_panic, if the function
>    get_scanout_buffer() exists. (Thomas Zimmermann)
>  * Add mgag200 support.
>  
> v5:
>  * Change the drawing API, use drm_fb_blit_from_r1() to draw the font.
>    (Thomas Zimmermann)
>  * Also add drm_fb_fill() to fill area with background color.
>  * Add draw_pixel_xy() API for drivers that can't provide a linear buffer.
>  * Add a flush() callback for drivers that needs to synchronize the buffer.
>  * Add a void *private field, so drivers can pass private data to
>    draw_pixel_xy() and flush(). 
>  * Add ast support.
>  * Add experimental imx/ipuv3 support, to test on an ARM hw. (Maxime Ripard)
>  
>  
> With mgag200 support, I was able to test that the xrgb8888 to rgb565 conversion is working.
> 
I am unable to test with that hardware, but I am able to test with simpledrm, and it works pretty good
> IMX/IPUV3 support is not complete, I wasn't able to have etnaviv working on my board.
> But it shows that it can still work on ARM with DMA buffer in this case.
> 
> Best regards,
> 
> 
> Jocelyn Falempe (6):
>   drm/format-helper: Add drm_fb_blit_from_r1 and drm_fb_fill
>   drm/panic: Add a drm panic handler
>   drm/simpledrm: Add drm_panic support
>   drm/mgag200: Add drm_panic support
>   drm/ast: Add drm_panic support
>   drm/imx: Add drm_panic support
> 
>  drivers/gpu/drm/Kconfig                  |  22 ++
>  drivers/gpu/drm/Makefile                 |   1 +
>  drivers/gpu/drm/ast/ast_drv.c            |   4 +-
>  drivers/gpu/drm/ast/ast_drv.h            |   3 +
>  drivers/gpu/drm/ast/ast_mode.c           |  26 ++
>  drivers/gpu/drm/drm_drv.c                |   8 +
>  drivers/gpu/drm/drm_format_helper.c      | 421 ++++++++++++++++++-----
>  drivers/gpu/drm/drm_panic.c              | 368 ++++++++++++++++++++
>  drivers/gpu/drm/imx/ipuv3/imx-drm-core.c |  30 ++
>  drivers/gpu/drm/mgag200/mgag200_drv.c    |  25 ++
>  drivers/gpu/drm/tiny/simpledrm.c         |  15 +
>  include/drm/drm_drv.h                    |  21 ++
>  include/drm/drm_format_helper.h          |   9 +
>  include/drm/drm_panic.h                  |  96 ++++++
>  14 files changed, 966 insertions(+), 83 deletions(-)
>  create mode 100644 drivers/gpu/drm/drm_panic.c
>  create mode 100644 include/drm/drm_panic.h
> 
> 
> base-commit: ffc253263a1375a65fa6c9f62a893e9767fbebfa
>