[PATCH 4/4] drm/msm/dsi: fix DSC for the bonded DSI case
Marijn Suijten
marijn.suijten at somainline.org
Tue Nov 14 18:28:38 UTC 2023
On what hardware have you been testing this? Dmitry and I have a stack of
patches to resolve support for Active CTL programming on newer hardware (DPU
5.0+ IIRC), where a single CTL is responsible for programming multiple INTF and
DSC blocks as used in bonded DSI.
On 2023-11-14 12:42:16, Jonathan Marek wrote:
> For the bonded DSI case, DSC pic_width and timing calculations should use
> the width of a single panel instead of the total combined width.
>
> Signed-off-by: Jonathan Marek <jonathan at marek.ca>
> ---
> drivers/gpu/drm/msm/dsi/dsi.h | 3 ++-
> drivers/gpu/drm/msm/dsi/dsi_host.c | 20 +++++++++++---------
> drivers/gpu/drm/msm/dsi/dsi_manager.c | 2 +-
> 3 files changed, 14 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/dsi/dsi.h b/drivers/gpu/drm/msm/dsi/dsi.h
> index 28379b1af63f..3a641e69447c 100644
> --- a/drivers/gpu/drm/msm/dsi/dsi.h
> +++ b/drivers/gpu/drm/msm/dsi/dsi.h
> @@ -93,7 +93,8 @@ int msm_dsi_host_power_off(struct mipi_dsi_host *host);
> int msm_dsi_host_set_display_mode(struct mipi_dsi_host *host,
> const struct drm_display_mode *mode);
> enum drm_mode_status msm_dsi_host_check_dsc(struct mipi_dsi_host *host,
> - const struct drm_display_mode *mode);
> + const struct drm_display_mode *mode,
> + bool is_bonded_dsi);
> unsigned long msm_dsi_host_get_mode_flags(struct mipi_dsi_host *host);
> int msm_dsi_host_register(struct mipi_dsi_host *host);
> void msm_dsi_host_unregister(struct mipi_dsi_host *host);
> diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
> index 7284346ab787..a6286eb9d006 100644
> --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
> +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
> @@ -938,8 +938,7 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
> mode->hdisplay, mode->vdisplay);
> return;
> }
> -
> - dsc->pic_width = mode->hdisplay;
> + dsc->pic_width = hdisplay;
In my testing and debugging on CMDmode panels downstream this value/register
was always programmed to the _full_ width of the bonded panel. Is that maybe
different for video mode?
> dsc->pic_height = mode->vdisplay;
> DBG("Mode %dx%d\n", dsc->pic_width, dsc->pic_height);
>
> @@ -950,6 +949,11 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
> if (ret)
> return;
>
> + if (msm_host->mode_flags & MIPI_DSI_MODE_VIDEO)
> + dsi_update_dsc_timing(msm_host, false, hdisplay);
> + else
> + dsi_update_dsc_timing(msm_host, true, hdisplay);
> +
Such cleanups (which appear unrelated) should probably be posted as separate
patches.
- Marijn
> /* Divide the display by 3 but keep back/font porch and
> * pulse width same
> */
> @@ -966,9 +970,6 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
> }
>
> if (msm_host->mode_flags & MIPI_DSI_MODE_VIDEO) {
> - if (msm_host->dsc)
> - dsi_update_dsc_timing(msm_host, false, mode->hdisplay);
> -
> dsi_write(msm_host, REG_DSI_ACTIVE_H,
> DSI_ACTIVE_H_START(ha_start) |
> DSI_ACTIVE_H_END(ha_end));
> @@ -987,9 +988,6 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
> DSI_ACTIVE_VSYNC_VPOS_START(vs_start) |
> DSI_ACTIVE_VSYNC_VPOS_END(vs_end));
> } else { /* command mode */
> - if (msm_host->dsc)
> - dsi_update_dsc_timing(msm_host, true, mode->hdisplay);
> -
> /* image data and 1 byte write_memory_start cmd */
> if (!msm_host->dsc)
> wc = hdisplay * dsi_get_bpp(msm_host->format) / 8 + 1;
> @@ -2487,7 +2485,8 @@ int msm_dsi_host_set_display_mode(struct mipi_dsi_host *host,
> }
>
> enum drm_mode_status msm_dsi_host_check_dsc(struct mipi_dsi_host *host,
> - const struct drm_display_mode *mode)
> + const struct drm_display_mode *mode,
> + bool is_bonded_dsi)
> {
> struct msm_dsi_host *msm_host = to_msm_dsi_host(host);
> struct drm_dsc_config *dsc = msm_host->dsc;
> @@ -2497,6 +2496,9 @@ enum drm_mode_status msm_dsi_host_check_dsc(struct mipi_dsi_host *host,
> if (!msm_host->dsc)
> return MODE_OK;
>
> + if (is_bonded_dsi)
> + pic_width = mode->hdisplay / 2;
> +
> if (pic_width % dsc->slice_width) {
> pr_err("DSI: pic_width %d has to be multiple of slice %d\n",
> pic_width, dsc->slice_width);
> diff --git a/drivers/gpu/drm/msm/dsi/dsi_manager.c b/drivers/gpu/drm/msm/dsi/dsi_manager.c
> index 896f369fdd53..2ca1a7ca3659 100644
> --- a/drivers/gpu/drm/msm/dsi/dsi_manager.c
> +++ b/drivers/gpu/drm/msm/dsi/dsi_manager.c
> @@ -455,7 +455,7 @@ static enum drm_mode_status dsi_mgr_bridge_mode_valid(struct drm_bridge *bridge,
> return MODE_ERROR;
> }
>
> - return msm_dsi_host_check_dsc(host, mode);
> + return msm_dsi_host_check_dsc(host, mode, IS_BONDED_DSI());
> }
>
> static const struct drm_bridge_funcs dsi_mgr_bridge_funcs = {
> --
> 2.26.1
>
More information about the dri-devel
mailing list