[PATCH v2 4/4] arm64: dts: qcom: sc7280: Add 0xac Adreno speed bin

Konrad Dybcio konrad.dybcio at linaro.org
Mon Nov 20 12:12:55 UTC 2023


A643 (A635 speedbin 0xac) tops out at 812 MHz. Fill in the
opp-supported-hw appropriately.

Note that fuseval 0xac is referred to as speedbin 1 downstream, but
that was already in use upstream, so 2 was chosen instead.

Signed-off-by: Konrad Dybcio <konrad.dybcio at linaro.org>
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 6964c14ffce5..b4e6951d9359 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -2630,14 +2630,14 @@ opp-315000000 {
 					opp-hz = /bits/ 64 <315000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
 					opp-peak-kBps = <1804000>;
-					opp-supported-hw = <0x03>;
+					opp-supported-hw = <0x07>;
 				};
 
 				opp-450000000 {
 					opp-hz = /bits/ 64 <450000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
 					opp-peak-kBps = <4068000>;
-					opp-supported-hw = <0x03>;
+					opp-supported-hw = <0x07>;
 				};
 
 				/* Only applicable for SKUs which has 550Mhz as Fmax */
@@ -2652,28 +2652,28 @@ opp-550000000-1 {
 					opp-hz = /bits/ 64 <550000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
 					opp-peak-kBps = <6832000>;
-					opp-supported-hw = <0x02>;
+					opp-supported-hw = <0x06>;
 				};
 
 				opp-608000000 {
 					opp-hz = /bits/ 64 <608000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
 					opp-peak-kBps = <8368000>;
-					opp-supported-hw = <0x02>;
+					opp-supported-hw = <0x06>;
 				};
 
 				opp-700000000 {
 					opp-hz = /bits/ 64 <700000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
 					opp-peak-kBps = <8532000>;
-					opp-supported-hw = <0x02>;
+					opp-supported-hw = <0x06>;
 				};
 
 				opp-812000000 {
 					opp-hz = /bits/ 64 <812000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
 					opp-peak-kBps = <8532000>;
-					opp-supported-hw = <0x02>;
+					opp-supported-hw = <0x06>;
 				};
 
 				opp-840000000 {

-- 
2.42.1



More information about the dri-devel mailing list