[PATCH] drm/panfrost: Really power off GPU cores in panfrost_gpu_power_off()
AngeloGioacchino Del Regno
angelogioacchino.delregno at collabora.com
Wed Nov 22 09:06:19 UTC 2023
Il 21/11/23 18:08, Krzysztof Kozlowski ha scritto:
> On 21/11/2023 17:55, Boris Brezillon wrote:
>> On Tue, 21 Nov 2023 17:11:42 +0100
>> AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
>> wrote:
>>
>>> Il 21/11/23 16:34, Krzysztof Kozlowski ha scritto:
>>>> On 08/11/2023 14:20, Steven Price wrote:
>>>>> On 02/11/2023 14:15, AngeloGioacchino Del Regno wrote:
>>>>>> The layout of the registers {TILER,SHADER,L2}_PWROFF_LO, used to request
>>>>>> powering off cores, is the same as the {TILER,SHADER,L2}_PWRON_LO ones:
>>>>>> this means that in order to request poweroff of cores, we are supposed
>>>>>> to write a bitmask of cores that should be powered off!
>>>>>> This means that the panfrost_gpu_power_off() function has always been
>>>>>> doing nothing.
>>>>>>
>>>>>> Fix powering off the GPU by writing a bitmask of the cores to poweroff
>>>>>> to the relevant PWROFF_LO registers and then check that the transition
>>>>>> (from ON to OFF) has finished by polling the relevant PWRTRANS_LO
>>>>>> registers.
>>>>>>
>>>>>> While at it, in order to avoid code duplication, move the core mask
>>>>>> logic from panfrost_gpu_power_on() to a new panfrost_get_core_mask()
>>>>>> function, used in both poweron and poweroff.
>>>>>>
>>>>>> Fixes: f3ba91228e8e ("drm/panfrost: Add initial panfrost driver")
>>>>>> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
>>>>
>>>>
>>>> Hi,
>>>>
>>>> This commit was added to next recently but it causes "external abort on
>>>> non-linefetch" during boot of my Odroid HC1 board.
>>>>
>>>> At least bisect points to it.
>>>>
>>>> If fixed, please add:
>>>>
>>>> Reported-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
>>>>
>>>> [ 4.861683] 8<--- cut here ---
>>>> [ 4.863429] Unhandled fault: external abort on non-linefetch (0x1008) at 0xf0c8802c
>>>> [ 4.871018] [f0c8802c] *pgd=433ed811, *pte=11800653, *ppte=11800453
>>>> ...
>>>> [ 5.164010] panfrost_gpu_irq_handler from __handle_irq_event_percpu+0xcc/0x31c
>>>> [ 5.171276] __handle_irq_event_percpu from handle_irq_event+0x38/0x80
>>>> [ 5.177765] handle_irq_event from handle_fasteoi_irq+0x9c/0x250
>>>> [ 5.183743] handle_fasteoi_irq from generic_handle_domain_irq+0x28/0x38
>>>> [ 5.190417] generic_handle_domain_irq from gic_handle_irq+0x88/0xa8
>>>> [ 5.196741] gic_handle_irq from generic_handle_arch_irq+0x34/0x44
>>>> [ 5.202893] generic_handle_arch_irq from __irq_svc+0x8c/0xd0
>>>>
>>>> Full log:
>>>> https://krzk.eu/#/builders/21/builds/4392/steps/11/logs/serial0
>>>>
>>>
>>> Hey Krzysztof,
>>>
>>> This is interesting. It might be about the cores that are missing from the partial
>>> core_mask raising interrupts, but an external abort on non-linefetch is strange to
>>> see here.
>>
>> I've seen such external aborts in the past, and the fault type has
>> often been misleading. It's unlikely to have anything to do with a
>
> Yeah, often accessing device with power or clocks gated.
>
Except my commit does *not* gate SoC power, nor SoC clocks 🙂
What the "Really power off ..." commit does is to ask the GPU to internally power
off the shaders, tilers and L2, that's why I say that it is strange to see that
kind of abort.
The GPU_INT_CLEAR GPU_INT_STAT, GPU_FAULT_STATUS and GPU_FAULT_ADDRESS_{HI/LO}
registers should still be accessible even with shaders, tilers and cache OFF.
Anyway, yes, synchronizing IRQs before calling the poweroff sequence would also
work, but that'd add up quite a bit of latency on the runtime_suspend() call, so
in this case I'd be more for avoiding to execute any register r/w in the handler
by either checking if the GPU is supposed to be OFF, or clearing interrupts, which
may not work if those are generated after the execution of the poweroff function.
Or we could simply disable the irq after power_off, but that'd be hacky (as well).
Let's see if asking to poweroff *everything* works:
---
drivers/gpu/drm/panfrost/panfrost_gpu.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/panfrost/panfrost_gpu.c
b/drivers/gpu/drm/panfrost/panfrost_gpu.c
index 09f5e1563ebd..1c7276aaa182 100644
--- a/drivers/gpu/drm/panfrost/panfrost_gpu.c
+++ b/drivers/gpu/drm/panfrost/panfrost_gpu.c
@@ -429,21 +429,29 @@ void panfrost_gpu_power_off(struct panfrost_device *pfdev)
int ret;
u32 val;
- gpu_write(pfdev, SHADER_PWROFF_LO, pfdev->features.shader_present & core_mask);
+ gpu_write(pfdev, SHADER_PWROFF_LO, pfdev->features.shader_present);
+ gpu_write(pfdev, SHADER_PWROFF_HI, U32_MAX);
ret = readl_relaxed_poll_timeout(pfdev->iomem + SHADER_PWRTRANS_LO,
val, !val, 1, 1000);
if (ret)
dev_err(pfdev->dev, "shader power transition timeout");
gpu_write(pfdev, TILER_PWROFF_LO, pfdev->features.tiler_present);
+ gpu_write(pfdev, TILER_PWROFF_HI, U32_MAX);
ret = readl_relaxed_poll_timeout(pfdev->iomem + TILER_PWRTRANS_LO,
val, !val, 1, 1000);
if (ret)
dev_err(pfdev->dev, "tiler power transition timeout");
- gpu_write(pfdev, L2_PWROFF_LO, pfdev->features.l2_present & core_mask);
+ gpu_write(pfdev, L2_PWROFF_LO, pfdev->features.l2_present);
ret = readl_poll_timeout(pfdev->iomem + L2_PWRTRANS_LO,
- val, !val, 0, 1000);
+ val, !val, 0, 1000);
+ if (ret)
+ dev_err(pfdev->dev, "l2_low power transition timeout");
+
+ gpu_write(pfdev, L2_PWROFF_HI, U32_MAX);
+ ret = readl_poll_timeout(pfdev->iomem + L2_PWRTRANS_HI,
+ val, !val, 0, 1000);
if (ret)
dev_err(pfdev->dev, "l2 power transition timeout");
}
--
2.42.0
Cheers,
Angelo
>> non-linefetch access, but it might be caused by a register access after
>> the clock or power domain driving the register bank has been disabled.
>> The following diff might help validate this theory. If that works, we
>> probably want to make sure we synchronize IRQs before disabling in the
>> suspend path.
>>
>> --->8---
>> diff --git a/drivers/gpu/drm/panfrost/panfrost_regs.h b/drivers/gpu/drm/panfrost/panfrost_regs.h
>> index 55ec807550b3..98df66e5cc9b 100644
>> --- a/drivers/gpu/drm/panfrost/panfrost_regs.h
>> +++ b/drivers/gpu/drm/panfrost/panfrost_regs.h
>> @@ -34,8 +34,6 @@
>> (GPU_IRQ_FAULT |\
>> GPU_IRQ_MULTIPLE_FAULT |\
>> GPU_IRQ_RESET_COMPLETED |\
>> - GPU_IRQ_POWER_CHANGED |\
>> - GPU_IRQ_POWER_CHANGED_ALL |\
>
> This helped, at least for this issue (next-20231121). Much later in
> user-space boot I have lockups:
> watchdog: BUG: soft lockup - CPU#4 stuck for 26s! [kworker/4:1:61]
>
> [ 56.329224] smp_call_function_single from
> __sync_rcu_exp_select_node_cpus+0x29c/0x78c
> [ 56.337111] __sync_rcu_exp_select_node_cpus from
> sync_rcu_exp_select_cpus+0x334/0x878
> [ 56.344995] sync_rcu_exp_select_cpus from wait_rcu_exp_gp+0xc/0x18
> [ 56.351231] wait_rcu_exp_gp from process_one_work+0x20c/0x620
> [ 56.357038] process_one_work from worker_thread+0x1d0/0x488
> [ 56.362668] worker_thread from kthread+0x104/0x138
> [ 56.367521] kthread from ret_from_fork+0x14/0x28
>
> But anyway the external abort does not appear.
>
> Best regards,
> Krzysztof
>
More information about the dri-devel
mailing list